Synthesis and Characterization of Biobased Poly (Ether Benzoxazole) Derived from Vanillin
Source abstract
Abstract
The synthesis of biobased poly(ether benzoxazole) (PEBO) derived from natural product vanillin was investigated. Poly(ether o-hydroxy amide) (PEHA) was used as a precursor of PEBO. PEBO was obtained by thermal treatment of PEHA based on the cyclodehydration. Synthesized PEBO was analyzed by Fourier transform infrared spectrometry (FTIR), differential scanning calorimetry (DSC) and thermogravimetric analysis (TGA) to confirm the structure and thermal properties. The resultant PEBO film showed flexible and self-standing property. This film also had 5.2 GPa for Youngʼs modulus and 117 MPa for tensile strength which were higher than those of the commercial engineering polymers and other PEBOs.
Source: openalex_inverted_index · Quality: baseline
Research context
OpenAlex topics: Synthesis and properties of polymers · biodegradable polymer synthesis and properties · Epoxy Resin Curing Processes
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
Affiliations
Graduate School of Bio-Applications and Systems Engineering, Tokyo University of Agriculture and Technology
Nakacho, Koganei-shi, Tokyo Department of Advanced Material and Chemical Engineering, Faculty of Engineering, Halla University
References (45)
Show source-provided references
1. [1] C. Arnold, J. Polym. Sci. Part D : Macromol. Rev., 14, 265 (1979).
2. [2] J. F. Wolfe, “Encyclopedia of Polymer Science and Engineering”, Wiley Interscience, New York (1985).
3. [3] H. H. Yang, “Aromatic High-Strength Fibers”, Wiley :New York (1989).
4. [4] E. W. Choe and S. N. Kim, Macromolecules, 14, 920 (1981).10.1021/ma50005a006 ↗
5. [5] T. Kitagawa, M. Ishitobi, and K. Yabuki, J. Polym. Sci., Polym. Phys. Ed., 38, 1605 (2000).10.1002/(SICI)1099-0488(20000615)38:12<1605::AID-POLB50>3.3.CO;2-Q ↗
6. [6] R. L. McGee, Y. H. So, S. J. Martin, C. F. Broomall, V.S Jeor, J. J. Curphy, E. J. Swedberg, and D. G. Wetters, J. Polym. Sci., Part A : Polym. Chem., 35, 2157 (1997).
7. [7] D. D. Feng, S. f. Wang, Q. X. Zhuang, P. Y. Guo, P. P.Wu, and Z. W. Han, J. Mol. Struct., 707, 167 (2004).10.1016/j.molstruc.2004.07.018 ↗
8. [8] T. Fukumaru, Y. Saegusa, T. Fujigaya, and N. Nakashima, Macromolecules, 47, 2088 (2014).10.1021/ma4024526 ↗
9. [9] K. Zhang, J. Liu, and H. Ishida, Macromolecules, 47, 8674 (2014).10.1021/ma502297m ↗
10. [10] P. J. Walsh, X. Hu, P. Cunniff, and A. J. Lesser, J. Appl. Polym. Sci., 102, 3517 (2006).10.1002/app.24788 ↗
11. [11] S. L. Hsu, K. Lin, and C. Wang, J. Polym. Sci., Part A: Polym.Chem., 46, 8159 (2008).
12. [12] Y. Imai, K. Itoya, and M. Kakimoto, Macromol. Chem. Phys., 201, 2251 (2000).10.1002/1521-3935(20001101)201:17<2251::AID-MACP2251>3.3.CO;2-N ↗
13. [13] Y. Oishi, A. Konno, J. Oravec, and K. Mori, J. Photopolym. Sci. Technol., 19, 669 (2006).10.2494/photopolymer.19.669 ↗
14. [14] G. L. Tullos, J. M. Powers, S. J. Jeskey, and L. J. Mathias Macromolecules, 32, 3598 (1999).10.1021/ma981579c ↗
15. [15] J. H. Chang, K. M. Park, S. M. Lee, and J. B Oh, J. Polym. Sci., Part B., 38, 2537 (2000).10.1002/1099-0488(20001001)38:19<2537::AID-POLB50>3.0.CO;2-V ↗
16. [16] S. L. Hsu, H. Chen, and S. Tsai, J. Polym. Sci., Part A: Polym.Chem., 42, 5990 (2004).
17. [17] Y. Maruyama, Y. Oishi, M. Kakimoto, and Y. Imai, Macromolecules, 21, 2305 (1988).10.1021/ma00186a001 ↗
18. [18] P. E. Cassidy, T. M. Aminabhavi, and J. M. Farley, J. Macromol. Sci., Rev. Macromol. Chem. Phys., C29, 365 (1989).
19. [19] J. G. Hilborn, J. W. Labadie, and J. L. Hedrick, Macromolecules, 23, 2854 (1990).10.1021/ma00213a006 ↗
20. [20] J. L. Hedrick, J. Hilborn, T. D. Palmer, J. W. Labadie, and W. Volksen, J. Polym. Sci., Part A :Polym. Chem., 28, 2255 (1990).
21. [21] W. D. Joseph, J. C. Abed, R. Mercier, J. E. McGrath, Polymer, 35, 5046 (1994).10.1016/0032-3861(94)90662-9 ↗
22. [22] S. H. Hsiao and C. H. Yu, Macromol. Chem. Phys., 199, 1247 (1998).10.1002/(SICI)1521-3935(19980701)199:7<1247::AID-MACP1247>3.3.CO;2-P ↗
23. [23] S. H. Hsiao and C. H. Yu, J. Polym. Sci., Part A :Polym. Chem., 37, 2129 (1999).
24. [24] K. H. Park, M. Kakimoto, and Y. Imai, J. Polym. Sci., Part A : Polym. Chem., 36, 1987 (1998).
25. [25] G. Maglio, R. Palumbo, and M. Tortora, J. Polym. Sci., Part A : Polym. Chem., 38, 1172 (2000).
26. [26] A. Llevot, E. Grau, S. Carlotti, S. Grelier, and H. Cramail, Macromol. Rapid Commun., 37, 9 (2016).10.1002/marc.201500474 ↗
27. [27] J. D. P. Araujo, C. A. Grande, and A. E. Rodrigues, Chem. Eng. Res. Des., 88, 1024 (2010).10.1016/j.cherd.2010.01.021 ↗
28. [28] T. Koike, Polym. Eng. Sci., 52, 701 (2012).10.1002/pen.23119 ↗
29. [29] C. Aouf, J. Lecomte, P. Villeneuve, E. Dubreucq,and H. Fulcrand, Green Chem., 14, 2328 (2012).10.1039/c2gc35558b ↗
30. [30] N. P. S. Chauhan, Des. Monomers Polym., 15, 587 (2012).10.1080/15685551.2012.705501 ↗
31. [31] L. Mialon, A. G. Pemba, and S. A. Miller, Green Chem., 12, 1704 (2010).10.1039/c0gc00150c ↗
32. [32] L. Mialon, R. Vanderhenst, A. G. Pemba, and S.A. Miller, Macromol Rapid Commun., 32, 1386 (2011).10.1002/marc.201100242 ↗
33. [33] J. F. Stanzione III, J. M. Sadler, J. J. La Scala, K. H. Reno, and R. P. Wool, Green Chem., 14, 2346 (2012).10.1039/c2gc35672d ↗
34. [34] A. L. Holmberg, J. F. Stanzione, R. P. Wool, and T. H. Epps, ACS Sust. Chem. Eng., 2, 569 (2014).10.1021/sc400497a ↗
35. [35] A. S. Amarasekara, B. Wiredu, and A. Razzaq, Green Chem., 14, 2395 (2012).10.1039/c2gc35645g ↗
36. [36] C. S. Hong, M. Jikei, and M. Kakimoto, Polym. J., 35, 859 (2003).10.1295/polymj.35.859 ↗
37. [37] I. Bury, B Heinrich, C. Bourgogne, D. Guillon, and B. Donnio, Chem.Eur.J .,12, 8396 (2006).10.1002/chem.200600449 ↗
38. [38] M. Ueda, T. Morosumi, M. Kakuta, and R. Sato, Polym. J., 22, 733 (1990).10.1295/polymj.22.733 ↗
39. [39] T. Hayakawa, T. Morishita, M. Okazaki, M. Ueda, K.Takeuchi, and M. Asai, J. Polym. Sci., Part A :Polym. Chem., 38, 3875 (2000).
40. [40] Y. Imai, Y. Maeda, H. Takeuchi, K. H. Park, M. Kakimoto, and T. Kurosaki, J. Polym. Sci., Part A :Polym. Chem., 40, 2656 (2002).
41. [41] C. S. Hong, M. Jikei, and M. Kakimoto, Polym. J., 35, 856 (2003).10.1295/polymj.35.586 ↗
42. [42] J. H. Chang, K. M. Park, and I. C. Lee, Polym. Bull., 44, 63 (2000).10.1007/s002890050574 ↗
43. [43] J. Lin and Y. M. Lee, Macro. Phys., 207, 1880 (2006).
44. [44] S. H. Hsiao and M. H. He, J, Polym, Sci. : Part A :Polym, Chem., 39, 4014 (2001).
45. [45] E. S. Yoo, A. J. Gavrin, R. J. Farris, and E. B. Coughlin, High Perform. Polym., 15, 519 (2003).10.1177/09540083030154008 ↗