journal article·2023-10-20Open access

Impact of sawmill processing on the yield and longitudinal warping of beech blanks

Ivan Klement, Peter Vilkovský, Tatiana Vilkovská

BioResources· Volume 18· Issue 4

Abstract

This study focused on the impact of the wood sawing pattern on 50 mm thick beech timber, followed by cross-cutting on the 3 m long, 50 × 50 mm beech blanks. The study analyzed two methods of cutting patterns of beech blanks (parallel to the surface of the timber and parallel to the grain fiber of the timber) regarding yield values and the size of longitudinal warping after air-drying. The yield values were higher (from 65.14 to 72.70 %) when producing long beech blanks using the method of sawing parallel to the timber’s axis (B) compared to parallel to the edge of the blank (from 60.38 to 68.40 %). Results showed that a crucial factor for choosing the cutting method (A or B) is the taper of the logs. For blanks with a taper ≥ 1.3 cm.m-1, it is more advantageous in terms of longitudinal warping and yield to use the method of sawing parallel to the timber’s axis.
Source: crossref · Quality: baseline

Research context

OpenAlex topics: Forest Biomass Utilization and Management · Tunneling and Rock Mechanics · Forest ecology and management

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

Affiliations

Technical University in Zvolen

References

Reference metadata was not supplied for this record.