Thermal conductivity of laminated veneer lumbers bonded with various adhesives and impregnated with various chemicals

Desmodur VTKA and Urea formaldehyde) on wooden materials (Scotch pine and oriental beech) cut tangentially and radially impregnated with Tanalith-C, creosote, and sodium silicate in layer (3, 4, 5) of laminated veneer lumber (LVLs) on thermal conductivity. The lowest thermal conductivity of 0.103 Kcal/mh°C was obtained in Scotch pine, cut tangentially, impregnated with creosote, bonded with urea formaldehyde, and 3 layer LVL. The highest thermal conductivity of 0.185 Kcal/mh°C was obtained in oriental beech, cut radially, impregnated with Tanalith-C, bonded with PVAc, and 5 layers LVL. Consequently, oriental beech wood cut radially and impregnated with Tanalith-C, bonded with PVAc adhesive and 5 layers in LVL can be used as a material in construction where the thermal conductivity is required. Scotch pine wood cut tangentially and impregnated with creosote, bonded with urea formaldehyde adhesive and 3 layers in LVL can be used as a material in construction where the insulation is required.