Development of an Analytical Model for Drilling Burr Formation in Ductile Materials
Source abstract
Abstract
Abstract An analytical model for drilling burr formation was developed. The model holds for ductile materials that do not show catastrophic fracture during the plastic deformation of workpiece material for burr formation. The proposed burr formation mechanism was based on the observation of behavior of workpiece materials during drilling of low alloy steel. The model was based on the principle of energy conservation and metal cutting theory. Experimental validation was done, and the results showed good agreement with the model. Based on the model, the effects of several important parameters on burr formation were investigated.
Source: crossref · Quality: baseline
Research context
OpenAlex topics: Advanced machining processes and optimization · Advanced Surface Polishing Techniques · Drilling and Well Engineering
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
Affiliations
5100A Etcheverry Hall, Department of Mechanical Engineering, University of California, Berkeley, Berkeley, CA 94720-1740
References (25)
Show source-provided references
1. Gillespie, L. K., 1975, “Burrs Produced by Side-milling Cutters,” Bendix Corporation Unclassified Topical Report, BDX-613-1303.10.2172/12483190 ↗
2. Gillespie, L. K., 1975, “Burrs Produced by Drilling,” Bendix Corporation Unclassified Topical Report, BDX-613-1248.10.2172/7351762 ↗
3. Gillespie, L. K., 1976, “Effects of Drilling Variables on Burr Properties,” Bendix Corporation, Unclassified Topical Report, BDX-613-1502.10.2172/7347654 ↗
4. Link, R., 1992, “Gratbildung und Strategien zur Gratreduzierung” Ph.D dissertation, RWTH Aachen, Germany.
5. Stein, J., and Dornfeld, D. A., 1995, “An Analysis of Burrs in Drilling Precision Miniature Holes Using a Fractional Factorial Design,” ASME Symposium on Production Eng., Winter Annual Meeting.
6. Pande, S., and Relekar, H., 1986, “Investigation on Reducing Burr Formation in Drilling,” Int. J. Mach. Tool Des. Res., 26, No. 3, pp. 339–348.10.1016/0020-7357(86)90010-7 ↗
7. Gillespie, L. K., and Blotter, P. T., 1976, “The Formation Properties of Machining Burrs,” ASME J. Eng. Ind., 98, No. 1, pp. 66–74.10.1115/1.3438875 ↗
8. Kim, J., and Dornfeld, D. A., 2000, “Development of a Drilling Burr Control Chart for Stainless Steel,” Transactions of NAMRI/SME, XXVIII, pp. 317–322.
9. Dornfeld, D. A., Kim, J., Dechow, H., Hewson, J., and Chen, L. J., 1999, “Drilling Burr Formation in Titanium Alloy, Ti-6A1-4V,” Annals of the CIRP V, 48/1, pp. 73–76.10.1016/S0007-8506(07)63134-5 ↗
10. Guo, Y. B., and Dornfeld, D. A., 1998, “Finite Element Analysis of Drilling Burr Minimization with a Backup Material,” Transactions of NAMRI/SME, 26, pp. 207–212.
11. Guo, Y., and Dornfeld, D. A., 1998, “Integration of CAD of Drill with FEA of Drilling Burr Formation,” Transactions of NAMRI/SME, 26, pp. 201–206.
12. Guo, Y., and Dornfeld, D. A., 2000, “Finite Element Modeling of Burr Formation Process in Drilling 304 Stainless Steel,” ASME J. Manuf. Sci. Eng., to appear.10.1115/1.1285885 ↗
13. Furness, R., 1998, High Speed Video of Drilling Burr Formation, AMTD, Ford Motor Company.
14. Sofronas, A., 1975, “The Formation and Control of Drilling Burrs,” Ph.D. dissertation, The University of Detroit.
15. Chandrasekharan, V., Kapoor, S. G., and Devor, R. E., 1995, “A Calibration Procedure for Fundamental Oblique-Cutting Model Coefficients Based on A Three-Dimensional Mechanistic Drilling Force Model,” Transactions of NAMRI/SME, XXVII, pp. 255–260.
16. Chandrasekharan, V., Kapoor, S. G., and Devor, R. E., 1995, “A Mechanistic Approach to Predicting the Cutting Forces in Drilling: With Application to Fiber-Reinforced Composite Materials,” ASME J. Eng. Ind., 117, pp. 559–570.10.1115/1.2803534 ↗
17. Chandrasekharan, V., Kapoor, S. G., and Devor, R. E., 1998, “A Mechanistic Model to Predict the Cutting Force System for Arbitrary Drill Point Geometry,” ASME J. Manuf. Sci. Eng., 120, pp. 563–570.10.1115/1.2830160 ↗
18. Chen, Y. R., Ni, J., and Katz, Z., 2000, “A Compact Geometrical-Model-Based Force Model and Improved Material Calibration Procedure for Arbitrary Geometry,” submitted for publication, CIRP Annals.
19. Mauch, C., and Lauderbaugh, L. K., 1990, “Modeling the Drilling Process-An Analytical Model to Predict Thrust Force and Torque,” Computer Modeling and Simulation of Manufacturing Processes, Singh, B., Im, Y., Haque, I., Altan, C., eds., ASME, New York, pp 59–66.
20. Roadinger, T. J., and Townsend, M. A., 1980, “Torque and Thrust Parameters in Drilling Using Dimensional Analysis,” ASME J. Eng. Ind., 102, pp. 37–44.10.1115/1.3183826 ↗
21. Rubenstein, C. , 1991, “The Torque and Thrust Force in Twist Drilling-I. Theory,” Int. J. Mach. Tools Manuf., 31, No. 4, pp. 481–489.10.1016/0890-6955(91)90031-W ↗
22. Rubenstein, C. , 1991, “The Torque and Thrust Force in Twist Drilling-I. Comparison of Experimental Observations with Deductions from Theory,” Int. J. Mach. Tools Manuf., 31, No. 4, pp. 491–504.10.1016/0890-6955(91)90032-X ↗
23. Merchant, M. E. , 1945, “Basic Mechanics of the Metal Cutting Process,” J. Appl. Phys., 16, pp. 267–275.10.1063/1.1707586 ↗
24. Williams, R. A. , 1974, “A Study of Drilling Process,” ASME J. Eng. Ind. 96, 1207–1215.10.1115/1.3438497 ↗
25. Galloway, D. F. , 1957, “Some Experiments on the Influence of Various Factors on Drill Performance,” Trans. ASME, 79, pp. 191–231.10.1115/1.4012963 ↗