Modeling the Effects of Damage and Microstructural Evolution on the Creep Behavior of Engineering Alloys
Source abstract
Abstract
A quantitative representation of the creep behavior of materials is required to determine the operating lives of high temperature plant. Although the creep performance of such materials is normally governed by the development of microstructural features that can either be associated with the normal aging phenomena or by the development of damage in the material, most previous analyses of creep data have been empirical. It has been implicitly assumed that similar forms of creep curves can be adequately represented by a single generic equation. However, it is clear that different materials are subject to different combinations of structural change during their creep lives (e.g., cavitation/cracking, particle coarsening, phase changes, dislocation accumulation) all of which can influence the creep performance. An empirical representation can always be made to fit an available database, but effective extrapolation to longer lives and more complex loading conditions requires that the differing mechanisms be integrated in the creep equations. This paper will explore the implications of the evolution of microstructure and damage on the creep performance of a range of materials and will consider the potential of a microstructure-based state-variable (or damage-mechanics) approach for improved design life prediction of new plant and remaining life assessment of geriatric plant. [S0094-4289(00)00603-4]
Source: crossref · Quality: baseline
Research context
OpenAlex topics: High Temperature Alloys and Creep · Probabilistic and Robust Engineering Design · Fatigue and fracture mechanics
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
Affiliations
Department of Materials, Imperial College of Science, Technology and Medicine, Prince Consort Road, London SW7 2BP, UK
References (21)
Show source-provided references
1. Andrade, E. N. da C. , 1910, “On the Viscous Flow in Metals and Allied Phenomena,” Proc. R. Soc. London, Ser. A, 84, pp. 1–12.10.1098/rspa.1910.0050 ↗
2. Webster, G. A., Cox, A. P. D., and Dorn, J. E., 1969, “A Relationship Between Transient and Steady-State Creep at Elevated Temperatures,” Met. Sci., 3, p. 221221.10.1179/msc.1969.3.1.221 ↗
3. Garafolo, F., 1965, Fundamentals of Creep and Creep Rupture in Metal, Macmillan, NY.
4. Graham, A., and Walles, K. F. A., 1955, “Relationships Between Long and Short Time Creep and Tensile Properties of a Commercial Alloy,” J. Iron Steel Inst., London, 179, pp. 105–120.
5. Evans, R. W., Parker, J. D., and Wilshire, B., 1982, “An Extrapolation Procedure for Long-Term Creep Strain and Creep Life Prediction with Special Reference to 1/2Cr1/2Mo1/4V Ferritic Steels,” Recent Advances in Creep and Fracture of Engineering Materials and Structures, Wilshire, B., and Owen, D. R. J., eds., Pineridge Press, Swansea, pp. 135–184.
6. Timmins, R., 1987, “The Creep and Fracture of a Nickel Based Superalloy under Uniaxial and Shear Stresses,” Ph.D. thesis, University of Sheffield, UK.
7. Przydatek, J., 1998, “The Elevated Temperature Deformation of Alloy 2650,” Ph.D. thesis, Imperial College of Science, Technology and Medicine, London.
8. Dyson, B. F., and Osgerby, S., 1993, “Modelling and Analysis of Creep Deformation and Fracture in a 1Cr1/2Mo Ferritic Steel,” NPL Report DMA A116.
9. Tipler, H. R., and Peck, M. S., 1981, “An Investigation of the Creep Fracture Process in a Cast Ni-Cr-Base Alloy IN738LC,” NPL Report DMA A33.
10. Dyson, B. F., and McLean, M., 1983, “Particle Coarsening σ0 and Tertiary Creep,” Acta Metall., 31, pp. 17–27.10.1016/0001-6160(83)90059-7 ↗
11. Dyson, B. F., and McLean, M., 1998, “Microstructural Evolution and Its Effects on the Creep Performance of High Temperature Alloys,” Microstructural Stability of Creep Resistant Alloys for High Temperature Plant Applications, A. Strang, et al., eds., Institute of Materials, London.
12. Dyson, B. F., Rogers, M. J., and Loveday, M. S., 1976, “Grain Boundary Cavitation Under Various States of Applied Stress,” Proc. R. Soc. London, Ser. A, 349, pp. 245–259.10.1098/rspa.1976.0071 ↗
13. Loveday, M. S., unpublished data, NPL Teddington, UK.
14. Kachanov, L. M. , 1958, “On Creep Rupture Time,” Izv. Ak. Nauk SSSR Otdel. Tekh. Nauk, 8, pp. 26–31.
15. Rabotnov, Y. N., 1969, “Creep Problems in Structural Members,” Proc. XII IUTAM Congress, Stanford, Hetenyi & Vincenti, eds., Springer, p. 137.
16. Leckie, F. A., and Hayhurst, D. R., 1974, “Creep Rupture of Structures,” Proc. R. Soc. London, Ser. A, 340, pp. 323–347.10.1098/rspa.1974.0155 ↗
17. Leckie, F. A., and Hayhurst, D. R., 1977, “Constitutive Equations for Creep Rupture,” Acta Metall., 25, pp. 1059–1070.10.1016/0001-6160(77)90135-3 ↗
18. Ashby, M. F., and Dyson, B. F., 1984, “Creep Damage Mechanics and Micromechanisms,” Advances in Fracture Research in Advances in Fracture Research,” S. R. Valluri et al., eds., Pergamon Press, Vol. 1, pp. 3–30.10.1016/B978-1-4832-8440-8.50017-X ↗
19. Ion, J. C., Barbosa, A., Ashby, M. F., Dyson, B. F., and McLean, M., 1986, “The Modelling of Creep for Engineering Design—I,” NPL Report DMA A115, The National Physical Laboratory, Teddington, Middx., U.K.
20. Kadoya, Y., Nishimura, N., Dyson, B. F., and McLean, M., 1997, “Origins of Tertiary Creep in High Chromium Steels,” Creep & Fracture of Engineering Materials & Structures, J. C. Earthman and F. A. Mohamed, eds., TMS, Warrendale, USA, pp. 343–352.
21. Penny, R. K., and Marriot, D. L., 1995, Design for Creep, 2nd edition, Chapman and Hall, London, pp. 30–35.