Deformation and Recrystallization Textures in Cross-Rolled Copper Sheet
Source abstract
Abstract
A study has been made of the deformation and recrystallization textures of 99.99% pure copper sheets which were cross rolled by 82 and 96% reduction in thickness and recrystallized in a salt bath at 450°C for 1h. The deformation texture was approximated by the {011}〈755〉 orientation as the major component and {001}〈100〉 as a minor component. These deformation texture components were well simulated using the rate sensitive relaxed constraints model. The {001}〈100〉 orientation was calculated to be metastable while the {011}〈755〉 orientation was located in the middle of the rotation path between the stable orientations in two cross rolling directions. The recrystallization texture in the center layer of the 96% cross-rolled copper sheet was approximated by {86 50 9}〈10 34 94〉 for each rolling direction. The evolution of the recrystallization texture was discussed based on the strain energy release maximization model.
Source: crossref · Quality: baseline
Research context
OpenAlex topics: Microstructure and mechanical properties · Metallurgy and Material Forming · Metal Forming Simulation Techniques
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
Affiliations
Research and Development Center, Union Steel MFG. Co., Ltd., 588-1 Gamman-dong, Nam-gu, Busan 608-070, Korea
School of Materials Science and Engineering, Seoul National University, San 56-1, Shinrim-dong, Gwanak-gu, Seoul 151-742, Korea
References (49)
Show source-provided references
1. Wasserman, G., and Grewen, J., 1969, Texturen metallischer Werkstoffe, Springer-Verlag, Berlin.
2. Merlini, A., and Beck, P. A., 1953, “Study on the Origin of the Cube Texture,” Acta Metall., 1, pp. 598–606.10.1016/0001-6160(53)90090-X ↗
3. O¨ztu¨rk, T. , 1988, “Deformation and Recrystallization Textures in Cross Rolled Sheets of Copper and alpha Brass,” Scr. Metall., 22, pp. 1611–1615.10.1016/S0036-9748(88)80252-7 ↗
4. To, Suet, Lee, W. B., and Ralph, B., 1994, “Deformation and Recrystallization in Cross Rolled Al-Cu Precipitation Alloys,” J. Mater. Sci., 29, pp. 269–275.10.1007/BF00356603 ↗
5. Bo¨cker, A., Klein, H., and Bunge, H. J., 1990, “Development of Cross-Rolling Textures in Armco-Iron,” Textures Microstruct., 12, pp. 103–123.10.1155/TSM.12.103 ↗
6. Chung, C. Y., 1996, “Earring Control be Delayed Cross Rolling,” Proceedings of the Eleventh International Conference on Textures of Materials, Z. Liang, L. Zuo and Y. Chu, eds., International Academic Publishers, Beijing, pp. 711–716.
7. Bunge, H.-J., 1982, Texture Analysis in Materials Science, Butterworths.
8. Wagner, F., and Dahms, M., 1989, “Determination of Complete ODFs with an Optimized Positivity Method,” Advances and Applications of Quantitative Texture Analysis, H.-J. Bunge and C. Esling, eds., Informationsgesellscahft, Verlag, pp. 101–108.
9. Randle, V., 1992, Microtexture Determination and Its Application, Inst. Mat., Bourne Press, Bournemouth, Great Bretain, 18.
10. Doherty, R. D., Samajdar, I., and Kunze, K., 1992, “Orientation Imaging Microscopy: Application to the Study of Cube Recrystallization Texture in Aluminum,” Scr. Metall. Mater., 27, pp. 1459–1464.10.1016/0956-716X(92)90128-2 ↗
11. Dingley, D. J., and Randle, V., 1992, “Microtexture Determination by Electron Back-Scatter Diffraction,” J. Mater. Sci., 27, pp. 4545–4566.10.1007/BF01165988 ↗
12. Wright, S. I., Adams, B. L., and Kunze, K., 1993, “Orientation Imaging: he Emergence of a New Microscopy,” Metall. Trans. A, 24A, pp. 819–831.10.1007/BF02656503 ↗
13. Toth, L. S., Gilormini, P., and Jonas, J. J., 1988, “Effect of Rate Sensitivity on the stability of Torsion Textures,” Acta Metall., 36, pp. 3077–3091.10.1016/0001-6160(88)90045-4 ↗
14. Daniel, D., Savoie, J., and Jonas, J. J., 1993, “Textures Induced by Tension and Deep Drawing in Low Carbon and Extra Low Carbon Steel Sheets,” Acta Metall. Mater., 41, pp. 1907–1920.10.1016/0956-7151(93)90210-J ↗
15. Hansen, N., Bay, B., Juul Jensen D., and Leffers, T., 1985, Proc. 7th Int. Conf. on Strength of Metals and Alloys, Motreal, p. 317.10.1016/B978-0-08-031642-0.50060-X ↗
16. Toth, L. S., Jonas, J. J., Daniel, D., and Ray, R. K., 1990, “Development of Ferrite Rolling Textures in Low- and Extra Low-Carbon Steels,” Metall. Trans. A, 21A, pp. 2985–3000.10.1007/BF02647219 ↗
17. Savoie, J., and Jonas, J. J., 1994, “Simulation of the Deformation Textures induced by Deep Drawing in Extra Low Carbon Steel Sheets,” Acta Metall. Mater., 42, pp. 4101–4116.10.1016/0956-7151(94)90188-0 ↗
18. Burgers, W. G., and Louwerse, P. C., 1931, “U¨ber den Zusammenhang zwischen Deformationsvorgang und Rekristallisationstextur bei Alumimium,” Z. Phisik., 67, pp. 605–678.10.1007/BF01390982 ↗
19. Dillamore, I. L., and Katoh, H., 1974, “The Mechanisms of Recrystallization in Cubic Metals with Particular Reference to their Orientation Dependence,” Metal Sci.,, 8, pp. 73–83.10.1179/msc.1974.8.1.73 ↗
20. Dons, A. L., and Nes, E., 1986, “Nucleation of Cube Texture in Aluminum,” Mater. Sci. Technol., 2, pp. 8–18.10.1179/026708386790123585 ↗
21. Heller, H., Slakhorst, J., and Verbraak, T., 1977, “The Development of Rolling and Recrystallization Textures in High Purity Al,” Z. Metallkd., 68, pp. 31–37.10.1515/ijmr-1977-680107 ↗
22. Noda, T., and Huber, J., 1978, “Electron/Microscopic Observations of Cube Oriented Regions in Heavily Rolled Sheets of FCC Metals with a Rolling Texture of the Copper Type,” Z. Metallkd., 69, pp. 570–574.10.1515/ijmr-1978-690903 ↗
23. Ridha, A. A., and Hutchinson, W. B., 1982, “Recrystallization Mechanisms and the Origin of Cube Texture in Copper,” Acta Metall., 30, pp. 1929–1939.10.1016/0001-6160(82)90033-5 ↗
24. Barrett, C. S. , 1940, “Recrystallization Texture of Aluminum after Compression,” Trans. Metall. Soc. AIME, 137, pp. 128–149.
25. Beck, P. A., and Hu, H., 1952, “Annealing Textures in Rolled Face-Centered Cubic Metals,” Trans. AIME, 194, pp. 83–90.10.1007/BF03397656 ↗
26. Beck, P. A. , 1954, “Annealing of Cold Worked Metals,” Adv. Phys., 3, pp. 245–324.10.1080/00018735400101203 ↗
27. Liemann, B., Lu¨cke, K., and Masing, G., 1956, “Untersuchungen u¨ber die Orientierung-sabha¨ngigkeit der Wachstumsgeschwindigkeot bei der primaren Rekristallisation von Aluminum-Einkristallen,” Z. Metallkd., 47, pp. 57–63.10.1515/ijmr-1956-470201 ↗
28. Ibe, G., and Lu¨cke, K., 1966, Recrystallization, Grain Growth and Textures, Margolin, ed., ASM, Metals Park, OH, p. 434.
29. Lu¨cke, K. , 1974, “The Orientation Dependence of Grain Boundary Motion and the Formation of Recrystallization Textures,” Can. Metall. Q., 13, pp. 261–274.10.1179/000844374795595037 ↗
30. Gottstein, G., and Shvindlerman, L. S., 1992, “On the Orientation Dependence of Grain Boundary Migration,” Scr. Metall. Mater., 27, pp. 1515–1520.10.1016/0956-716X(92)90137-4 ↗
31. Modov, D. A., Czubayko, U., Gottstein, G., and Shvindlerman, L. S., 1995, Scr. Metall. Mater., 32, p. 529529.
32. Lee, D. N. , 1995, “The Evolution of Recrystallization Textures from Deformation Textures,” Scr. Metall. Mater., 32, pp. 1689–1694.10.1016/0956-716X(95)00256-U ↗
33. Park, Y. B., Lee, D. N., and Gottstein, G., 1997, “Evolution of Recrystallization Textures from Cold Rolling Textures in Interstitial Free Steel,” Mater. Sci. Technol., 13, pp. 289–298.10.1179/026708397790302395 ↗
34. Park, Y. B., Lee, D. N., and Gottstein, G., 1998, “The Evolution of Recrystallization Textures in Body Centered Cubic Metals,” Acta Mater., 46, pp. 3371–3379.10.1016/S1359-6454(98)00052-4 ↗
35. Hong, S.-H., Jeong, H.-T., Choi, C.-H., and Lee, D. N., 1997, “Deformation and Recrystallization Textures of Surface Layer of Copper Sheet,” Mater. Sci. Eng., A, A229, pp. 174–181.10.1016/S0921-5093(96)10818-2 ↗
36. Hong, S.-H., Park, N.-J., and Lee, D. N., 1999, “The Evolution of Deformation and Recrystallization Textures of Cross Rolled Copper Sheets,” Proceedings of the Twelfth International Conference on Textures of Materials, J. A. Szpunar, Ed., NRC Research Press, pp. 950–955.
37. Lee, D. N., and Jeong, H.-T., 1998, “The Evolution of the Goss Texture in Silicon Steel,” Scr. Mater., 38, pp. 1219–1223.10.1016/S1359-6462(98)00022-0 ↗
38. Lee, D. N. , 1996, “Recrystallization Texture of Plane Strain Compressed Aluminum Single Crystal,” Textures Microstruct., 26–27, pp. 361–367.10.1155/TSM.26-27.361 ↗
39. Lee, D. N., and Jeong, H.-T., 1999, “Recrystallization Textures of Aluminum Bicrystals with S Orientation Deformed by Channel Die Compression,” Mater. Sci. Eng., A, A269, pp. 49–58.10.1016/S0921-5093(99)00130-6 ↗
40. Shin, H.-J., Jeong, H.-T., and Lee, D. N., 2000, “Deformation and Annealing Textures of Silver Wire,” Mater. Sci. Eng., A, A279, pp. 244–253.10.1016/S0921-5093(99)00535-3 ↗
41. Lee, D. N., Kang, S., Yang, J., 1995, “Relationships between Initial and Recrystallization Textures of Copper Electrodeposits,” Plating & Surface Finishing , 82, pp. 76–79.
42. Nam, H.-S., and Lee, D. N., 1999, “Recrystallization Textures of Silver Electrodeposits,” J. Electrochem. Soc., 146, pp. 3300–3308.10.1149/1.1392471 ↗
43. Yang, J. S., and Lee, D. N., 1999, “The Deposition and Recrystallization Textures of Copper Electrodeposits obtained from a Copper Cyanide Bath,” Met. Mater., 5, pp. 465–470.10.1007/BF03026160 ↗
44. Choi, J. H., Byun, J.-S., and Lee, D. N., 2000, “Precipitation Characteristics of Cu-Mn-P Alloy,” J. Mater. Sci., 35, pp. 4151–4157.10.1023/A:1004863010680 ↗
45. Hirsch, J., and Lu¨cke, K., 1988, “Mechanism of Deformation and Development of Rolling Textures in Polycrystalline FCC Metals: - I. Description of Rolling Texture Development in Homogeneous CuZn Alloys,” Acta Metall., 36, pp. 2863–2882.
46. Hirsch, J., and Lu¨cke, K., 1988, “Mechanism of Deformation and Development of Rolling Textures in Polycrystalline FCC Metals: - II. Simulation and Interpretation of Experiments on the Basis of Taylor Type Theories,” Acta Metall., 36, pp. 2883–2904.10.1016/0001-6160(88)90173-3 ↗
47. Hirsch, J., and Lu¨cke, K., 1988, “Mechanism of Deformation and Development of Rolling Textures in Polycrystalline FCC Metals: - III. The Influence of Slip Inhomogeneities and Twinning,” Acta Metall., 36, pp. 2905–2927.
48. Bauer, R. E., Mecking, H., and Lu¨cke, K., 1977, “Textures of Copper Single Crystals after Rolling at Room Temperature,” Mater. Sci. Eng., 27, pp. 163–180.10.1016/0025-5416(77)90168-9 ↗
49. Lee, D. N. , 2000, “Strain Energy Release Maximization Model for Evolution of Recrystallization Textures,” Int. J. Mech. Sci., 42, pp. 1645–1678.10.1016/S0020-7403(99)00095-8 ↗