Laser-Induced Graphene Arrays-Based Three-Phase Interface Enzyme Electrode for Reliable Bioassays
Source abstract
Abstract
Electrochemical oxidase biosensors have been widely applied in healthcare, environmental measurements and the biomedical field. However, the low and fluctuant oxygen levels in solution and the high anodic detection potentially restrict the assay accuracy. To address these problems, in this work, we constructed a three-phase interface enzyme electrode by sequentially immobilizing H2O2 electrocatalysts and an oxidase layer on a superhydrophobic laser-induced graphene (LIG) array substrate. The LIG-based enzyme electrode possesses a solid–liquid–air three-phase interface where constant and sufficient oxygen can be supplied from the air phase to the enzymatic reaction zone, which enhances and stabilizes the oxidase kinetics. We discovered that the enzymatic reaction rate is 21.2-fold improved over that of a solid–liquid diphase system where oxygen is supplied from the liquid phase, leading to a 60-times wider linear detection range. Moreover, the three-phase enzyme electrode can employ a cathodic measuring principle for oxidase catalytic product H2O2 detection, which could minimize interferences arising from oxidizable molecules in biofluids and increase the detection selectivity. This work provides a simple and promising approach to the design and construction of high-performance bioassay systems.
Source: crossref · Quality: baseline
Research context
OpenAlex topics: Electrochemical sensors and biosensors · Advanced biosensing and bioanalysis techniques · Electrochemical Analysis and Applications
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
Affiliations
College of Chemistry, Chemical Engineering and Materials Science, Soochow University, Suzhou 215000, China
Innovation Center for Chemical Science, Soochow University, Suzhou 215000, China
Funding
National Key R&D Program of China · National Natural Science Foundation of China · Natural Science Research of Jiangsu Higher Education Institutions of China · Jiangsu Provincial Shuangchuang Doctor Talent Program
References (31)
Show source-provided references
1. A laser-engraved wearable sensor for sensitive detection of uric acid and tyrosine in sweat10.1038/s41587-019-0321-x ↗
2. Integrated textile sensor patch for real-time and multiplex sweat analysis10.1126/sciadv.aax0649 ↗
3. Catalytically synthesized Prussian blue nanoparticles defeating natural enzyme peroxidase10.1021/jacs.8b05223 ↗
4. Electrochemical glucose sensors in diabetes management: An updated review (2010–2020)10.1039/D0CS00304B ↗
5. Self-assembled multiple-enzyme composites for enhanced synergistic cancer starving-catalytic therapy10.1021/acsami.0c02006 ↗
6. Wearable smart sensor systems integrated on soft contact lenses for wireless ocular diagnostics10.1038/ncomms14997 ↗
7. A nanostructured conductive hydrogels-based biosensor platform for human metabolite detection10.1021/nl504217p ↗
8. In-situ preparation of lactate-sensing membrane for the noninvasive and wearable analysis of sweat10.1016/j.bios.2022.114303 ↗
9. Bioinspired designs of superhydrophobic and superhydrophilic materials10.1021/acscentsci.8b00504 ↗
10. Improved interfacial floatability of superhydrophobic/superhydrophilic janus sheet inspired by lotus leaf10.1002/adfm.201701466 ↗
11. Elastic superhydrophobic and photocatalytic active films used as blood repellent dressing10.1002/adma.201908008 ↗
12. Enhancing condensation heat transfer on three-dimensional hybrid surfaces10.1016/j.joule.2019.08.005 ↗
13. Li, F., Liu, Y., Zhou, H., and Tian, G. (2022). Preparation and evaluation of PDMS/carbon soot particles superhydrophobic biomimetic composite coating with self-cleaning and durability. Biomimetics, 7.10.3390/biomimetics7030132 ↗
14. Interfacial material system exhibiting superwettability10.1002/adma.201400883 ↗
15. Boosting gas involved reactions at nanochannel reactor with joint gas-solid-liquid interfaces and controlled wettability10.1021/jacs.7b05249 ↗
16. Engineering the Ni-N-C catalyst microenvironment enabling CO2 electroreduction with nearly 100% CO selectivity in acid10.1002/adma.202201295 ↗
17. Utilization of peroxide reduction reaction at air-liquid-solid joint interfaces for reliable sensing system construction10.1002/adma.201701473 ↗
18. High-performance flexible bioelectrocatalysis bioassay system based on a triphase interface10.1002/admi.201902172 ↗
19. Flexible triphase enzyme electrode based on hydrophobic porous PVDF membrane for high-performance bioassays10.1016/j.bios.2021.113201 ↗
20. An enhanced enzymatic reaction using a triphase system based on superhydrophobic mesoporous nanowire arrays10.1039/C8NH00184G ↗
21. Laser-induced porous graphene films from commercial polymers10.1038/ncomms6714 ↗
22. Laser-induced graphene10.1021/acs.accounts.8b00084 ↗
23. Laser-induced graphene: From discovery to translation10.1002/adma.201803621 ↗
24. Investigation of cortisol dynamics in human sweat using a graphene-based wireless mHealth system10.1016/j.matt.2020.01.021 ↗
25. A flexible non-enzymatic glucose sensor based on copper nanoparticles anchored on laser-induced graphene10.1016/j.carbon.2019.10.006 ↗
26. Laser fabrication of graphene-based flexible electronics10.1002/adma.201901981 ↗
27. Raman spectrum of graphene and graphene layers10.1103/PhysRevLett.97.187401 ↗
28. Raman spectroscopy as a versatile tool for studying the properties of graphene10.1038/nnano.2013.46 ↗
29. Electrochemical sensing of neonicotinoids using laser-induced graphene10.1021/acssensors.1c01082 ↗
30. Uncertainty quantification of Michaelis-Menten kinetic rates and its application to the analysis of CRISPR-based diagnostics10.1002/anie.202209527 ↗
31. Laser induced self-N-doped porous graphene as an electrochemical biosensor for femtomolar miRNA detection10.1016/j.carbon.2020.03.043 ↗