Comparative Evaluation of Color Stability in Bioactive and Conventional Resin Cements Under Thermal Stress Conditions
Source abstract
Abstract
Bioactive resin-based cements (RBCs) were recently introduced, but data on their color stability remain limited. This study analyzed the impact of thermal cycling on the color and whiteness of bioactive RBCs. Specimens (n = 10) were fabricated from Panavia SA Universal (PN), Predicta Bioactive Cement (PR), and ACTIVA BioACTIVE cement (AC). CIE Lab* values were registered at baseline and after 5000, 10,000, and 15,000 thermal cycles (5–55 °C). Changes in color (ΔE00) and whiteness index (ΔWID) were calculated and compared. Material type and thermal cycling significantly affected ΔE00 and ΔWID (p < 0.001). AC showed the highest ΔE00 values at all stages (p < 0.001), with a progressive increase over time. PN differed significantly between early and later cycles (p < 0.05), while PR remained stable (p > 0.05). Analysis of color parameters indicated that AC underwent the most pronounced changes, particularly in Δa and Δb, while PN exhibited the greatest shift in Δb. For ΔWID, PR had significantly lower values than PN (p < 0.05) and AC (p < 0.001), with no difference between PN and AC (p > 0.05), and thermal cycling significantly affected all groups, with PR and AC differing across all stages (p < 0.05). Thermal cycling significantly influenced the color stability and whiteness of bioactive RBCs, with AC exhibiting the greatest changes over time, while PR demonstrated superior stability.
Source: crossref · Quality: baseline
Research context
OpenAlex topics: Dental materials and restorations · Bone Tissue Engineering Materials
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
Affiliations
Department of Restorative Dentistry, Faculty of Dentistry, King Abdulaziz University, Jeddah 21589, Saudi Arabia
Advanced Technology Dental Research Laboratory, King Abdulaziz University, Jeddah 21589, Saudi Arabia
Funding
KAU Endowment (WAQF) at King Abdulaziz University
References (53)
Show source-provided references
1. Lepora, N.F., Verschure, P., and Prescott, T.J. (2013). The state of the art in biomimetics. Bioinspir. Biomim., 8.10.1088/1748-3182/8/1/013001 ↗
2. Zafar, M.S., Amin, F., Fareed, M.A., Ghabbani, H., Riaz, S., Khurshid, Z., and Kumar, N. (2020). Biomimetic Aspects of Restorative Dentistry Biomaterials. Biomimetics, 5.10.3390/biomimetics5030034 ↗
3. Biomimetic Dentistry: Basic Principles and Protocols
4. Biomechanics, Bioactive and Biomimetic philosophy in restorative dentistry—Quo vadis?10.1016/j.jdent.2024.105036 ↗
5. Mazzitelli, C., Paolone, G., Sabbagh, J., Scotti, N., and Vichi, A. (2023). Color Stability of Resin Cements after Water Aging. Polymers, 15.10.3390/polym15030655 ↗
6. Singer, L., Fouda, A., and Bourauel, C. (2023). Biomimetic approaches and materials in restorative and regenerative dentistry: Review article. BMC Oral Health, 23.10.1186/s12903-023-02808-3 ↗
7. Heboyan, A., Vardanyan, A., Karobari, M.I., Marya, A., Avagyan, T., Tebyaniyan, H., Mustafa, M., Rokaya, D., and Avetisyan, A. (2023). Dental Luting Cements: An Updated Comprehensive Review. Molecules, 28.10.3390/molecules28041619 ↗
8. Al-Saleh, S., Aboghosh, T.W., Hazazi, M.S., Binsaeed, K.A., Almuhaisen, A.M., Tulbah, H.I., Al-Qahtani, A.S., Shabib, S., Binhasan, M., and Vohra, F. (2021). Polymer-Based Bioactive Luting Agents for Cementation of All-Ceramic Crowns: An SEM, EDX, Microleakage, Fracture Strength, and Color Stability Study. Polymers, 13.10.3390/polym13234227 ↗
9. Luting indirect restorations with resin cements versus composite resins: Effects of preheating and ultrasound energy on film thickness10.1111/jerd.12851 ↗
10. Resin composite cements: Current status and a novel classification proposal10.1111/jerd.13036 ↗
11. Influence of resin cement shade on the color and translucency of ceramic veneers10.1590/1678-775720150550 ↗
12. Effect of cement type, luting protocol, and ceramic abutment material on the shade of cemented titanium-based lithium disilicate crowns and surrounding peri-implant soft tissue: A spectrophotometric analysis10.4047/jap.2024.16.4.231 ↗
13. Up to 12 years clinical evaluation of 197 partial indirect restorations with deep margin elevation in the posterior region10.1016/j.jdent.2019.103227 ↗
14. A Comprehensive Review of Resin Cements: Bonding Mechanisms and Polymerization Reactions10.1016/j.sdentj.2023.11.010 ↗
15. Influence of inorganic composition and filler particle morphology on the mechanical properties of self-adhesive resin cements10.5395/rde.2022.47.e32 ↗
16. Gomes, C., Martins, F., Reis, J.A., Maurício, P.D., and Ramírez-Fernández, M.P. (2023). Color Assessment of Feldspathic Ceramic with Two Different Thicknesses, Using Multiple Polymeric Cements. Polymers, 15.10.3390/polym15020397 ↗
17. The influence of finishing lines and margin location on enamel and dentin removal for indirect partial restorations: A micro-CT quantitative evaluation10.1016/j.jdent.2022.104334 ↗
18. Effect of Ageing, Staining and Polishing on the Colour Stability of a Single, a Group Shade and Nano Fill Dental Composite: An In-vitro Study
19. Sokolowski, G., Szczesio, A., Bociong, K., Kaluzinska, K., Lapinska, B., Sokolowski, J., Domarecka, M., and Lukomska-Szymanska, M. (2018). Dental Resin Cements-The Influence of Water Sorption on Contraction Stress Changes and Hydroscopic Expansion. Material, 11.10.3390/ma11060973 ↗
20. From names to concepts: Unraveling bioactivity in restorative dental materials10.1016/j.adaj.2025.02.005 ↗
21. Bioactivity of Dental Restorative Materials: FDI Policy Statement10.1016/j.identj.2022.11.012 ↗
22. “Bioactivity” in Restorative Dentistry: Standing for the Use of Innovative Materials to Improve the Longevity of Restorations in Routine Dental Practice
23. Kunert, M., Piwonski, I., Hardan, L., Bourgi, R., Sauro, S., Inchingolo, F., and Lukomska-Szymanska, M. (2024). Dentine Remineralisation Induced by “Bioactive” Materials through Mineral Deposition: An In Vitro Study. Nanomaterials, 14.10.3390/nano14030274 ↗
24. Bioactive Dental Composites and Bonding Agents Having Remineralizing and Antibacterial Characteristics10.1016/j.cden.2017.05.002 ↗
25. Vohra, F., Altwaim, M., Alshuwaier, A.S., Alomayri, A., Al Deeb, M., AlFawaz, Y.F., Alrabiah, M., Al Ahdal, K., Al Deeb, L., and Abduljabbar, T. (2020). Bond integrity and microleakage of dentin-bonded crowns cemented with bioactive cement in comparison to resin cements: In vitro study. J. Appl. Biomater. Funct. Mater., 18.10.1177/2280800020905768 ↗
26. Parkell (2022). Advertorial: At Last, an Outstanding Universal Cement That Closes the Gap Against Microleakage!. Dent. Prod. Rep., 56, 63.
27. Investigating the impact of surface treatments on tensile bond strength between pediatric prefabricated zirconia crowns and primary maxillary incisors with various types of luting cement: An in vitro study10.1007/s40368-024-00926-2 ↗
28. Checchi, V., Forabosco, E., Della Casa, G., Kaleci, S., Giannetti, L., Generali, L., and Bellini, P. (2024). Color Stability Assessment of Single- and Multi-Shade Composites Following Immersion in Staining Food Substances. Dent. J., 12.10.3390/dj12090285 ↗
29. Rohym, S., Tawfeek, H.E.M., and Kamh, R. (2023). Effect of coffee on color stability and surface roughness of newly introduced single shade resin composite materials. BMC Oral Health, 23.10.1186/s12903-023-02942-y ↗
30. Comparison of the CIELab and CIEDE2000 color difference formulas10.1016/j.prosdent.2015.07.001 ↗
31. Development of a customized whiteness index for dentistry based on CIELAB color space10.1016/j.dental.2015.12.008 ↗
32. Effect of aging and bleaching on the color stability and surface roughness of a recently introduced single-shade composite resin10.1016/j.jdent.2024.104917 ↗
33. (2017). Dental Materials e Determination of Color Stability (Standard No. ISO 7491:2000). Published (Edition 2, 2000) Reviewed and Confirmed in 2023.
34. Whiteness difference thresholds in dentistry10.1016/j.dental.2018.11.022 ↗
35. Acceptability and perceptibility thresholds in dentistry: A comprehensive review of clinical and research applications10.1111/jerd.12465 ↗
36. Thermal cycling for restorative materials: Does a standardized protocol exist in laboratory testing? A literature review10.1016/j.jmbbm.2013.09.013 ↗
37. Evaluation of ISO 4049: Water sorption and water solubility of resin cements10.1111/eos.12339 ↗
38. Effect of curing mode of resin composite cements on water sorption, color stability, and biaxial flexural strength10.1016/j.dental.2024.04.004 ↗
39. Color and opacity variations in three different resin-based composite products after water aging10.1016/j.dental.2002.11.001 ↗
40. Influence of 10-MDP concentration on the adhesion and physical properties of self-adhesive resin cements10.5395/rde.2019.44.e45 ↗
41. Varying 10-methacryloyloxydecyl dihydrogen phosphate (10-MDP) level improves polymerisation kinetics and flexural strength in self-adhesive, remineralising composites10.1016/j.dental.2021.06.006 ↗
42. Color Stability and Degree of Conversion of Light-cured Resin Cements10.2174/18742106-v17-e230518-2023-19 ↗
43. Pissaia, J., Guanaes, B., Kintopp, C., Correr, G., Cunha, L., and Gonzaga, C. (2019). Color stability of ceramic veneers as a function of resin cement curing mode and shade: 3-year follow-up. PLoS ONE, 14.10.1371/journal.pone.0219183 ↗
44. Shade of Resin-Based Luting Agents and Final Color of Porcelain Veneers10.1111/jerd.12196 ↗
45. Bal, L., and Öztürk, C. (2025). The effect of UV aging on the color stability and translucency of luting agents cemented to different CAD/CAM materials. BMC Oral Health, 25.10.1186/s12903-025-06001-6 ↗
46. Radwanski, M., Zmyslowska-Polakowska, E., Osica, K., Krasowski, M., Sauro, S., Hardan, L., and Lukomska-Szymanska, M. (2025). Mechanical properties of modern restorative “bioactive” dental materials—An in vitro study. Sci. Rep., 15.10.1038/s41598-025-86595-7 ↗
47. Development of a low-color, color stable, dual cure dental resin10.1016/j.dental.2013.01.005 ↗
48. Quantification of organic eluates from polymerized resin-based dental restorative materials by use of GC/MS10.1016/j.jchromb.2006.11.003 ↗
49. Assessing the estrogenic activity of chemicals present in resin based dental composites and in leachates of commercially available composites using the ERα-CALUX bioassay10.1016/j.dental.2021.09.013 ↗
50. Effect of ultraviolet protective agents on maxillofacial silicone elastomer, part 1: Color stability after artificial aging10.1016/j.prosdent.2021.06.033 ↗
51. Alzahrani, B., Alshabib, A., and Awliya, W. (2023). The Depth of Cure, Sorption and Solubility of Dual-Cured Bulk-Fill Restorative Materials. Materials, 16.10.3390/ma16206673 ↗
52. Resin-based luting agents and color stability of bonded ceramic veneers10.1016/j.prosdent.2015.01.008 ↗
53. Birant, S., and Gümüştaş, B. (2024). The effect of thermal aging on microhardness and SEM/EDS for characterisation bioactive filling materials. BMC Oral Health, 24.10.1186/s12903-024-04643-6 ↗