journal article·2024-02-21Open access

A Bio-Inspired Approach to Improve the Toughness of Brittle Bast Fibre-Reinforced Composites Using Cellulose Acetate Foils

Nina Graupner, Jörg Müssig

Biomimetics· Volume 9· Issue 3

Abstract

Bast fibre-reinforced plastics are characterised by good strength and stiffness but are often brittle due to the stiff and less ductile fibres. This study uses a biomimetic approach to improve impact strength. Based on the structure of the spicules of a deep-sea glass sponge, in which hard layers of bioglass alternate with soft layers of proteins, the toughness of kenaf/epoxy composites was significantly improved by a multilayer structure of kenaf and cellulose acetate (CA) foils as impact modifiers. Due to the alternating structure, cracks are deflected, and toughness is improved. One to five CA foils were stacked with kenaf layers and processed to composite plates with bio-based epoxy resin by compression moulding. Results have shown a significant improvement in toughness using CA foils due to increased crack propagation. The unnotched Charpy impact strength increased from 9.0 kJ/m2 of the pure kenaf/epoxy composite to 36.3 kJ/m2 for the sample containing five CA foils. The tensile and flexural strength ranged from 74 to 81 MPa and 112 to 125 MPa, respectively. The tensile modulus reached values between 9100 and 10,600 MPa, and the flexural modulus ranged between 7200 and 8100 MPa. The results demonstrate the successful implementation of an abstract transfer of biological role models to improve the toughness of brittle bast fibre-reinforced plastics.
Source: crossref · Quality: baseline

Research context

OpenAlex topics: Calcium Carbonate Crystallization and Inhibition · Natural Fiber Reinforced Composites · Innovations in Concrete and Construction Materials

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

Affiliations

HSB—Hochschule Bremen, the Biological Materials Group, Department of Biomimetics, Neustadtswall 30, D-28199 Bremen, Germany

References (71)

Show source-provided references
1. Composite materials with bast fibres: Structural, technical, and environmental properties10.1016/j.pmatsci.2016.04.002 ↗
2. Kenaf-fiber-reinforced poly(lactic acid) used for electronic products10.1002/app.23377 ↗
3. Mechanical separation of kenaf for composite applications—Evaluation of the total fibre line concept for field retted kenaf10.1016/j.indcrop.2023.117870 ↗
4. A comprehensive review on light weight kenaf fiber for automobiles
5. A Review on the Kenaf Fiber Reinforced Thermoset Composites10.1007/s10443-021-09871-5 ↗
6. Mechanical properties of kenaf fibre reinforced polymer composite: A review10.1016/j.conbuildmat.2014.11.043 ↗
7. Kenaf (Hibiscus cannabinus L.) fibre based bio-materials: A review on processing and properties10.1016/j.pmatsci.2015.11.001 ↗
8. Effects of fibre treatment on mechanical properties of kenaf fibre reinforced composites: A review10.1016/j.jmrt.2019.04.012 ↗
9. Improvement in mechanical properties of reinforced thermoplastic elastomer composite with kenaf bast fibre10.1016/j.compositesb.2010.12.013 ↗
10. Mihalic, M., Pretschuh, S.L., and Unterweger, C. (2019). Increasing the impact toughness of cellulose fiber reinforced polypropylene composites—Influence of different impact modifiers and production scales. J. Compos. Sci., 3.10.3390/jcs3030082 ↗
11. Damage investigation and assessment due to low-velocity impact on flax/glass hybrid composite plates10.1016/j.compstruct.2019.111224 ↗
12. Damage mechanisms assessment of hybrid flax-glass fibre composites using acoustic emission10.1016/j.compstruct.2017.04.044 ↗
13. Hemp from disordered lines for new staple fibre yarns and high-performance composite applications10.3389/fmats.2021.807004 ↗
14. Effect of stacking sequence on the tensile and flexural properties of glass fibre epoxy composites hybridized with basalt, flax or jute fibres
15. Nadzri, S.N.Z.A., Sultan, M.T.H., Shah, A.U.M., Safri, S.N.A., and Basri, A.A. (2020). A review on the kenaf/glass hybrid composites with limitations on mechanical and low velocity impact properties. Polymers, 12.10.3390/polym12061285 ↗
16. A review on kenaf fiber hybrid composites: Mechanical properties, potentials, and challenges in engineering applications10.1177/1477760620953438 ↗
17. Inspiration from Nature’s body armours—A review of biological and bioinspired composites10.1016/j.compositesb.2020.108513 ↗
18. Learning from nature: Bio-inspiration for damage-tolerant high-performance fibre-reinforced composites10.1016/j.compscitech.2021.108669 ↗
19. Bio-inspired impact-resistant composites10.1016/j.actbio.2014.03.022 ↗
20. A review of factors that influence the fracture toughness of extrusion-based additively manufactured polymer and polymer composites
21. Graupner, N., Labonte, D., Humburg, H., Buzkan, T., Dörgens, A., Kelterer, W., and Müssig, J. (2017). Functional gradients in the pericarp of the green coconut inspire asymmetric fibre-composites with improved impact strength, and preserved flexural and tensile properties. Bioinspir. Biomim., 12.10.1088/1748-3190/aa5262 ↗
22. Effect of stacking sequence on tensile, flexural and thermomechanical properties of hybrid flax/glass and jute/glass thermoset composites10.1177/1528083717736102 ↗
23. Study on impact resistance behaviors of a novel composite laminate with basalt fiber for helical-sinusoidal bionic structure of dactyl club of mantis shrimp10.1016/j.compositesb.2020.107976 ↗
24. Fiber arrangement endow compression resistance of the mantis shrimp hammer-like appendage10.1016/j.jmrt.2022.10.112 ↗
25. Improved strength and toughness of bioinspired Bouligand architecture composite by discontinuous carbon fiber10.1088/1742-6596/1906/1/012030 ↗
26. A review of nacre-inspired materials: Chemistry, strengthening-deformation mechanism, synthesis, and applications10.1016/j.pmatsci.2023.101168 ↗
27. On the mechanics of mother-of-pearl: A key feature in the material hierarchical structure10.1016/j.jmps.2006.07.007 ↗
28. Barthelat, F. (2010). Nacre from mollusk shells: A model for high-performance structural materials. Bioinspir. Biomim., 5.10.1088/1748-3182/5/3/035001 ↗
29. Comparison of nacre with other ceramic composites10.1007/BF00587670 ↗
30. Mimicking nacre with super-nanotubes for producing optimized super-composites10.1088/0957-4484/17/21/031 ↗
31. Interaction between nacre-like CFRP mesolayers and long-fibre interlayers10.1016/j.compstruct.2018.05.103 ↗
32. Exploiting nacre-inspired crack deflection mechanisms in CFRP via micro-structural design10.1016/j.compscitech.2017.08.023 ↗
33. Ehrlich, H., and Worch, H. (2007). Sponges as Natural Composites: From Biomimetic Potential to Development of New Biomaterials, Rio de Janeiro Museu Nacional.
34. Mechanically robust lattices inspired by deep-sea glass sponges10.1038/s41563-020-0798-1 ↗
35. The structural efficiency of the sea sponge Euplectella aspergillum skeleton: Bio-inspiration for 3D printed architectures10.1098/rsif.2018.0965 ↗
36. Crack propagation and toughening mechanisms of bio-inspired artificial spicules fabricated by additive manufacturing technique10.1016/j.tafmec.2020.102797 ↗
37. New functional insights into the internal architecture of the laminated anchor spicules of Euplectella aspergillum10.1073/pnas.1415502112 ↗
38. Effects of laminate architecture on fracture resistance of sponge biosilica: Lessons from nature10.1002/adfm.200701135 ↗
39. Tensile and fracture behavior of silica fibers from the Venus flower basket (Euplectella aspergillum)10.1016/j.ijsolstr.2022.111622 ↗
40. Influence of the testing gage length on the strength, Young’s modulus and Weibull modulus of carbon fibres and glass fibres10.1590/S1516-14392002000400004 ↗
41. Skeleton of Euplectella sp.: Structural hierarchy from the nanoscale to the macroscale10.1126/science.1112255 ↗
42. Structural Arrangement and Properties of Spicules in Glass Sponges10.5402/2011/535872 ↗
43. Micromechanical properties of biological silica in skeletons of deep-sea sponges10.1557/jmr.2006.0251 ↗
44. Concepts towards bio-inspired multilayered polymer-composites10.1016/j.prostr.2023.07.018 ↗
45. The Influence of Lyocell and Kenaf Fibres on the Mechanical Characteristics of Poly(lactic acid) (PLA) Composites10.1166/jbmb.2012.1239 ↗
46. (1997). Bestimmung der Zugeigenschaften, Teil 4: Prüfbedingungen für Isotrop und Anisotrop Faserverstärkte Kunststoffverbunde (Standard No. DIN EN ISO 527-4:1997).
47. (2010). Kunststoffe—Bestimmung der Charpy-Schlageigenschaften—Teil 1: Nicht Instrumentierte Schlagzähigkeitsprüfung (Standard No. DIN EN ISO 179-1).
48. Nonwoven materials based on natural and artificial fibers10.1007/s10570-023-05719-2 ↗
49. Procedural influences on compression and injection moulded cellulose fibre-reinforced polylactide (PLA) composites: Influence of fibre loading, fibre length, fibre orientation and voids10.1016/j.compositesa.2015.10.040 ↗
50. (2003). Faserverstärkte Kunststoffe—Bestimmung der Biegeeigenschaften (Standard No. DIN EN ISO 14125:2003).
51. Tensile properties of fibre-reinforced metals: Copper/tungsten and copper/molybdenum10.1016/0022-5096(65)90035-9 ↗
52. On weakest link theory and Weibull statistics10.1111/jace.14665 ↗
53. Natural and man-made cellulose fibre-reinforced poly(lactic acid) (PLA) composites: An overview about mechanical characteristics and application areas10.1016/j.compositesa.2009.04.003 ↗
54. The end of the flexural modulus
55. García-Quiles, L., Fernández Cuello, Á., and Castell, P. (2019). Sustainable materials with enhanced mechanical properties based on industrial polyhydroxyalkanoates reinforced with organomodified sepiolite and montmorillonite. Polymers, 11.10.3390/polym11040696 ↗
56. Mazur, K., and Kuciel, S. (2019). Mechanical and Hydrothermal Aging Behaviour of Polyhydroxybutyrate-Co-Valerate (PHBV) Composites Reinforced by Natural Fibres. Molecules, 24.10.3390/molecules24193538 ↗
57. Biologically degummed and chemically treated okra bast fibers-reinforced poly(vinyl alcohol) composites
58. Low velocity impact behaviour and post-impact characteristics of kenaf/glass hybrid composites with various weight ratios10.1016/j.jmrt.2019.04.005 ↗
59. Suriani, M.J., Ilyas, R.A., Zuhri, M.Y.M., Khalina, A., Sultan, M.T.H., Sapuan, S.M., Ruzaidi, C.M., Wan, F.N., Zulkifli, F., and Harussani, M.M. (2021). Critical review of natural fiber reinforced hybrid composites: Processing, properties, applications and cost. Polymers, 13.10.3390/polym13203514 ↗
60. Regenerated cellulose fibers as impact modifier in long jute fiber reinforced polypropylene composites: Effect on mechanical properties, morphology, and fiber breakage10.1002/app.41301 ↗
61. Experimental investigation on Charpy impact response of kenaf bast fibre reinforced metal laminate system
62. Effects of different pre-treatments on the performance of kenaf fiber reinforced aluminum laminates sandwich composite
63. Development of flax/carbon fibre hybrid composites for enhanced properties10.1016/j.carbpol.2013.03.074 ↗
64. Mechanical behavior of carbon/flax hybrid composites for structural applications10.1177/0021998311429884 ↗
65. Damage tolerance of carbon/flax hybrid composites subjected to low velocity impact10.1016/j.compositesb.2016.01.050 ↗
66. Effect of interlayer carbon fiber dispersion on the low-velocity impact performance of woven flax-carbon hybrid composites10.1177/0021998318808355 ↗
67. A competitive study of the static and fatigue performance of flax, glass, and flax/glass hybrid composites on the structural example of a light railway axle tie10.3389/fmats.2022.837289 ↗
68. Lyocell fibres based on direct dissolution of cellulose in N-methylmorpholine N-oxide: Development and prospects10.1007/s10692-007-0032-9 ↗
69. Rheology of lyocell solutions from different cellulose sources10.1023/A:1014881901010 ↗
70. Makarov, I.S., Golova, L.K., Smyslov, A.G., Vinogradov, M.I., Palchikova, E.E., and Legkov, S.A. (2022). Flax noils as a source of cellulose for the production of lyocell fibers. Fibers, 10.10.3390/fib10050045 ↗
71. Lyocell fibers for textile processing derived from organically grown hemp10.1016/j.proeng.2017.07.037 ↗