Implications of agro-industrial wastes on the durability and erosion characteristics of unfired soil-blocks reinforced with paddy straw fibers: Sustainable earth construction

On Earth, there is an abundance of soil that has been utilized to build homes for millions of people. Manufacturing compacted stabilized adobe blocks requires adequate water added to the appropriate soil type that has been admixed with binders and fibers to attain maximum density. The mixture is then compressed using the appropriate adobe-forming machine. Currently, the major environmental and human health risks worldwide come from industrial and agricultural wastes because of disposal concerns. The production and use of cement and cement blocks bring numerous economic and environmental issues. Utilizing locally available resources and enhancing standard production and testing methods are two feasible options for sustainable growth. Researchers have seen the promise of earthen construction as an alternative building material, and it is becoming more popular in the context of sustainable development. Marble dust (MD) (Industrial waste), sugarcane bagasse ash (SBA), and paddy straw fiber (PSF) (Agricultural wastes) were utilized in this research to manufacture the unfired admixed soil blocks. This study utilizes marble dust composed up to 25%–35%, paddy straw fiber constituted 0.8%–1.2%, and bagasse ash made up 7.5%–12.5% of the soil. The marble-dust-bagasse-ash-soil mix was strongly adherent to PSF, according to SEM investigation. In addition, as is apparent from the image, the number of pores is insignificant. These images support the preceding conclusions regarding this sample’s increased flexural and tensile strength. The primary constituents discovered on the surface of an unfired ad-mixed soil block strengthened with PSF of length 75 mm were silica (Si) and oxygen (O), according to the EDS examination. Aluminum (Al) and magnesium (Mg) were found in trace amounts. The endurance characteristics of the block were determined by conducting different tests on the eighty-one (81) design mixes of the produced unfired ad-mixed adobe blocks, followed by modeling, optimization and microstructural analysis. The results show that the recommended technique improves the durability characteristics of admixed soil blocks without burning better than burnt bricks.