journal article·2025-02Open access

Expectations vs. reality in nacre-like composites: dominating role of particle packing and polymer confinement in mechanical performance

V. Semeykina, C. Appiah, S. Rothberg, S. Heinrich, D. Giuntini, G. A. Schneider

Abstract

Abstract After decades of research, mimicking the intricate structure of nacre shells with flawlessly packed blocks remains a laborious task in composite material design. For practical reasons, less ideal alternatives with reduced packing densities below 70 vol.% are often being explored. However, the extent to which the features of the nacre structure can be exploited remains unclear. This paper investigates whether mimicking nacre design in non-densely packed composites can still deliver exceptional mechanical performance. A wide range of ceramic particles (80–100 µm, including spheres and platelets) and methacrylate-based polymers was studied. All the composites exhibited little variation in strength (100–150 MPa) and E-modulus regardless of hierarchical structure, particle size, shape, or interfacial bonding, highlighting the greater importance of particle packing over these factors for ceramic loadings below 65 vol.%. In particular, the benefits of micron-sized anisotropic particles were diminished by the fundamental challenges in aligning such blocks: although these assemblies significantly enhanced fracture resistance, the elastic modulus was still lower than expected (25 GPa). A polydisperse mixture of irregularly shaped micron-sized particles surprisingly achieved a high elastic modulus of 20 GPa, suggesting that an optimized size distribution can provide benefits comparable to those of particle anisotropy. Composites loaded with small particles (< 500 nm) exhibited two key effects: the solvation shells contributed to the total organic content significantly, limiting the maximum ceramic loading, and the polymer confined within small interparticle voids exhibited increased stiffness, leading to more brittle fracture despite the abundance of organic phase. Both phenomena should be accounted for in theoretical simulations and the practical design of composite materials. Graphical Abstract
Source: crossref · Quality: baseline

Research context

OpenAlex topics: Calcium Carbonate Crystallization and Inhibition · Bone Tissue Engineering Materials · Paleontology and Stratigraphy of Fossils

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (54)

Show source-provided references
1. Pan H, She W, Zuo W et al (2020) Hierarchical toughening of a biomimetic bulk cement composite. ACS Appl Mater Interfaces 12:53297–5330910.1021/acsami.0c15313 ↗
2. Zandinejad AA, Atai M, Pahlevan A (2006) The effect of ceramic and porous fillers on the mechanical properties of experimental dental composites. Dent Mater 22:382–38710.1016/j.dental.2005.04.027 ↗
3. Marin E (2023) History of dental biomaterials: biocompatibility, durability and still open challenges. Herit Sci 11:20710.1186/s40494-023-01046-8 ↗
4. Porto T, Roperto R, Porto-Neto S et al (2017) Polymer-infiltrated-ceramic-network the evolution of CAD/CAM materials. EC Dent Sci 13:94–98
5. Meyers MA, Chen PY, Lin AYM et al (2008) Biological materials: structure and mechanical properties. Prog Mater Sci 53:1–20610.1016/j.pmatsci.2007.05.002 ↗
6. Sun J, Bhushan B (2012) Hierarchical structure and mechanical properties of nacre: a review. RSC Adv 2:7617–763210.1039/c2ra20218b ↗
7. Bouville F, Maire E, Meille S et al (2014) Strong, tough and stiff bioinspired ceramics from brittle constituents. Nat Mater 13:508–51410.1038/nmat3915 ↗
8. Morits M, Verho T, Sorvari J et al (2017) Toughness and fracture properties in nacre-mimetic clay/polymer nanocomposites. Adv Funct Mater 27:160537810.1002/adfm.201605378 ↗
9. Maghsoudi-Ganje M, Lin L, Wang X et al (2019) Bioinspired design of hybrid composite materials. Int J Smart Nano Mater 10:90–10510.1080/19475411.2018.1541145 ↗
10. Song J, Chen C, Zhu S et al (2018) Processing bulk natural wood into a high-performance structural material. Nature 554:224–22810.1038/nature25476 ↗
11. Özduman ZC, Oglakci B, Halacoglu Bagis DM, Aydogan Temel B, Eliguzeloglu Dalkilic E (2023) Comparison of a nanofiber-reinforced composite with different types of composite resins. Polymers (Basel) 15:362810.3390/polym15173628 ↗
12. An Y, Han J, Zhang X et al (2016) Bioinspired high toughness graphene/ZrB2 hybrid composites with hierarchical architectures spanning several length scales. Carbon N Y 107:209–21610.1016/j.carbon.2016.05.074 ↗
13. Jiao D, Qu RT, Weng ZY et al (2019) On the fracture mechanisms of nacre: effects of structural orientation. J Biomech 96:10933610.1016/j.jbiomech.2019.109336 ↗
14. Li XW, Ji HM, Yang W et al (2017) Mechanical properties of crossed-lamellar structures in biological shells: a review. J Mech Behav Biomed Mater 74:54–7110.1016/j.jmbbm.2017.05.022 ↗
15. Yang X-Y, Chen L-H, Li Y et al (2017) Hierarchically porous materials: synthesis strategies and structure design. Chem Soc Rev 46:481–55810.1039/C6CS00829A ↗
16. Barthelat F, Tang H, Zavattieri PD et al (2007) On the mechanics of mother-of-pearl: a key feature in the material hierarchical structure. J Mech Phys Solids 55:306–33710.1016/j.jmps.2006.07.007 ↗
17. Li H, Xu Z-H, Li X (2013) Multiscale hierarchical assembly strategy and mechanical prowess in conch shells (Busycon carica). J Struct Biol 184:409–41610.1016/j.jsb.2013.10.011 ↗
18. Lin AY-M, Chen P-Y, Meyers MA (2008) The growth of nacre in the abalone shell. Acta Biomater 4:131–13810.1016/j.actbio.2007.05.005 ↗
19. Studart AR (2016) Additive manufacturing of biologically-inspired materials. Chem Soc Rev 45:359–37610.1039/C5CS00836K ↗
20. Wegst UGK, Bai H, Saiz E et al (2015) Bioinspired structural materials. Nat Mater 14:23–3610.1038/nmat4089 ↗
21. Peng J, Cheng Q (2017) High-performance nanocomposites inspired by nature. Adv Mater 29:170295910.1002/adma.201702959 ↗
22. Le Ferrand H, Bouville F, Niebel TP et al (2015) Magnetically assisted slip casting of bioinspired heterogeneous composites. Nat Mater 14:1172–117910.1038/nmat4419 ↗
23. Mirabello G, Ianiro A, Bomans P et al (2020) Crystallization by particle attachment is a colloidal assembly process. Nat Mater 4:391–39610.1038/s41563-019-0511-4 ↗
24. Bonderer LJ, Studart AR, Gauckler LJ (2008) Bioinspired design and assembly of platelet reinforced polymer films. Science (80-) 319:1069–107310.1126/science.1148726 ↗
25. Podsiadlo P, Kaushik AK, Arruda EM et al (2007) Ultrastrong and stiff layered polymer nanocomposites. Science (80-) 318:80–8310.1126/science.1143176 ↗
26. Dreyer A, Feld A, Kornowski A et al (2016) Organically linked iron oxide nanoparticle supercrystals with exceptional isotropic mechanical properties. Nat Mater 15:522–52810.1038/nmat4553 ↗
27. Georgopanos P, Schneider GA, Dreyer A, Handge UA et al (2017) Exceptionally strong, stiff and hard hybrid material based on an elastomer and isotropically shaped ceramic nanoparticles. Sci Rep 7:731410.1038/s41598-017-07521-0 ↗
28. Munch E, Launey ME, Alsem DH et al (2008) Tough, bio-inspired hybrid materials. Science (80-) 322:1516–152010.1126/science.1164865 ↗
29. Lassila L, Keulemans F, Vallittu PK et al (2020) Characterization of restorative short-fiber reinforced dental composites. Dent Mater 39:992–99910.4012/dmj.2019-088 ↗
30. Launey ME, Munch E, Alsem DH et al (2009) Designing highly toughened hybrid composites through nature-inspired hierarchical complexity. Acta Mater 57:2919–293210.1016/j.actamat.2009.03.003 ↗
31. Bu Y, Wang X, Bu X et al (2023) Self-assembling nacre-like high-strength and extremely tough polymer composites with new toughening mechanism. J Mater Sci Technol 136:236–24410.1016/j.jmst.2022.05.063 ↗
32. Cui B-C, Li J, Lin Y-H et al (2019) Polymer-infiltrated layered silicates for dental restorative materials. Rare Met 38:1003–101410.1007/s12598-019-01267-6 ↗
33. Ikeda H, Kawajiri Y, Sodeyama MK et al (2022) A SiO2/pHEMA-based polymer-infiltrated ceramic network composite for dental restorative materials. J Compos Sci 6:1710.3390/jcs6010017 ↗
34. Skorulska APP, Rybak Z, Szymonowicz M et al (2021) Review on polymer, ceramic and composite materials for CAD/CAM indirect restorations in dentistry-application: mechanical characteristics and comparison. Materials (Basel) 14:159210.3390/ma14071592 ↗
35. Jelitto H, Felten F, Swain MV et al (2007) Measurement of the total energy release rate for cracks in PZT under combined mechanical and electrical loading. J Appl Mech 74:1197–121110.1115/1.2744027 ↗
36. Zhao H, Zhao Y, Lin G (2018) Nacre-inspired composites with different macroscopic dimensions: strategies for improved mechanical performance and applications. NPG Asia Mater 10:1–2210.1038/s41427-018-0009-6 ↗
37. Abuelenain DA, Neel EAA, Al-Dharrab A (2015) Surface and mechanical properties of different dental composites. Austin J Dent 2:1019
38. Rajinthan L, Fritz S, Galkov I et al (2023) Nacre-like composites with a soft thermoplastic elastomer matrix. Compos Sci Technol 244:110302. https://doi.org/10.1016/j.compscitech.2023.11030210.1016/j.compscitech.2023.110302 ↗
39. Tushtev K, Murck M, Grathwohl G (2008) On the nature of the stiffness of nacre. Mater Sci Eng C 28:1164–117210.1016/j.msec.2007.10.039 ↗
40. Kroner E (1958) Berechnung der elastischen Konstanten des Vielkristalls aus des Konstanten des Einkristalls. Z Phys 151:504–51810.1007/BF01337948 ↗
41. Jäger I, Fratzl P (2000) Mineralized collagen fibrils: a mechanical model with a staggered arrangement of mineral particles. Biophys J 79(4):1737–1746. https://doi.org/10.1016/S0006-3495(00)76426-510.1016/S0006-3495(00)76426-5 ↗
42. Begley MR, Philips NR, Compton BG et al (2012) Micromechanical models to guide the development of synthetic “brick and mortar” composites. J Mech Phys Solids 60:1545–156010.1016/j.jmps.2012.03.002 ↗
43. Stempflé P, Pantalé O, Rousseau M et al (2010) Mechanical properties of the elemental nanocomponents of nacre structure. Mater Sci Eng C 30:715–72110.1016/j.msec.2010.03.003 ↗
44. Greco F, Leonetti L, Pranno A et al (2020) Mechanical behavior of bio-inspired nacre-like composites: a hybrid multiscale modeling approach. Compos Struct 233:111625. https://doi.org/10.1016/j.compstruct.2019.11162510.1016/j.compstruct.2019.111625 ↗
45. Fu SY, Feng XQ, Lauke B et al (2008) Effects of particle size, particle/matrix interface adhesion and particle loading on mechanical properties of particulate-polymer composites. Compos Part B Eng 39:933–96110.1016/j.compositesb.2008.01.002 ↗
46. Li L, Maddalena L, Nishiyama Y et al (2022) Recyclable nanocomposites of well-dispersed 2D layered silicates in cellulose nanofibril (CNF) matrix. Carbohydr Polym 279:119004. https://doi.org/10.1016/j.carbpol.2021.11900410.1016/j.carbpol.2021.119004 ↗
47. Liu A, Walther A, Ikkala O et al (2011) Clay nanopaper with tough cellulose nanofiber matrix for fire retardancy and gas barrier functions. Biomacromol 12:633–64110.1021/bm101296z ↗
48. Polte J (2015) Fundamental growth principles of colloidal metal nanoparticles - a new perspective. CrystEngComm 17:6809–6830. https://doi.org/10.1039/C5CE01014D10.1039/C5CE01014D ↗
49. Mueller S, Llewellin EW, Mader HM (2010) The rheology of suspensions of solid particles. Proc R Soc A 466:1201–122810.1098/rspa.2009.0445 ↗
50. Greenwood R, Luckham PF, Gregory T (1998) Minimising the viscosity of concentrated dispersions by using bimodal particle size distributions. Colloids Surfaces A Physicochem Eng Asp 144:139–14710.1016/S0927-7757(98)00409-9 ↗
51. Zaman AA, Dutcher CS (2006) Viscosity of electrostatically stabilized dispersions of monodispersed, bimodal, and trimodal silica particles. J Am Ceram Soc 89:422–43010.1111/j.1551-2916.2005.00725.x ↗
52. Pal R (2023) Recent progress in the viscosity modeling of concentrated suspensions of unimodal hard spheres. ChemEngineering 7:7010.3390/chemengineering7040070 ↗
53. Jiang Y, Tohgo K, Yang H (2010) Study of the effect of particle size on the effective modulus of polymeric composites on the basis of the molecular chain network microstructure. Comput Mater Sci 49:439–443. https://doi.org/10.1016/j.commatsci.2010.05.01510.1016/j.commatsci.2010.05.015 ↗
54. Roth CB (2021) Polymers under nanoconfinement: where are we now in understanding local property changes? Chem Soc Rev 50:8050–806610.1039/D1CS00054C ↗