Zero-Support 3D Printing of Thermoset Silicone Via Simultaneous Control of Both Reaction Kinetics and Transient Rheology
Source abstract
Abstract
Abstract This article presents a framework for using isothermal curing kinetics and transient rheological data to 3D print a curing thermoset silicone without support. These data are used to determine time and temperature boundary conditions for amount of curing during extrusion and layering of the print. From the time of mixing, rheological data show how the elastic modulus ( G′ ) and yield stress ( σ y ) grow as the number of crosslinks increases. The kinetics data show changes in the rate of curing of the silicone and predict final cure time. Time boundaries for stages of transient curing are reported from heat flow, yield stress, and G′ at the printer operating temperature. These times are used to prevent clogging of the mixing nozzle and ensure layering of unsupported elastomeric silicone. Several models are 3D printed to show the successes and drawbacks of the method within equipment limitations. This framework can be applied to help bound the printable region of other reactive thermoset materials in mixed extrusion systems. By printing without support, this method can produce overhanging and enclosed hollow structures that require minimal postprocessing.
Source: crossref · Quality: baseline
Research context
OpenAlex topics: Additive Manufacturing and 3D Printing Technologies · 3D Printing in Biomedical Research · Injection Molding Process and Properties
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
Affiliations
Department of Materials Science, Oregon State University, Corvallis, Oregon.
Collaborative Robotics and Intelligent Systems (CoRIS) Institute, Oregon State University, Corvallis, Oregon.
Department of Chemical, Biological, and Environmental Engineering, Oregon State University, Corvallis, Oregon.
Department of Mechanical Engineering, Oregon State University, Corvallis, Oregon.
References (24)
Show source-provided references
1. 10.1002/adma.20150022210.1002/adma.201500222 ↗
2. Lipton JI, , Angle S, , Lipson H. 3D printable wax-silicone actuators. Annu Int Solid Free Fabr Symp, 2014; 2014:4–6.
3. 10.1002/adma.20130550610.1002/adma.201305506 ↗
4. 10.1038/nmat478210.1038/nmat4782 ↗
5. 10.1073/pnas.150922411210.1073/pnas.1509224112 ↗
6. Periard D, , Malone E, , Lipson H. Printing Embedded Circuits. 18th Solid Freeform Fabrication Symposium, Austin, TX, 2007:6–8.
7. 10.1109/LRA.2016.259860110.1109/LRA.2016.2598601 ↗
8. Yirmibesoglu OD, , Morrow J, , Walker S, et al. Direct 3D printing of silicone elastomer soft robots and their performance comparison with molded counterparts. IEEE Int Conf Soft Robot RoboSoft, 2018; 2018:295–302.
9. 10.1002/adma.20150007210.1002/adma.201500072 ↗
10. 10.1002/adma.20150170810.1002/adma.201501708 ↗
11. 10.1089/3dp.2015.001710.1089/3dp.2015.0017 ↗
12. Yuk H, , Zhao X. A new 3D printing strategy by harnessing deformation, instability, and fracture of viscoelastic inks. Adv Mater, 2017; 1704028.
13. Discov3ry 2.0 Complete. Struct Print Go Plast. Available at: https://www.structur3d.io/discov3ry-2-complete/ Accessed November17 2017.
14. ACEO® Silicones - Introducing a new material for 3D printing. ACEO. Available at: https://www.aceo3d.com/silicones/ Accessed November17 2017.
15. picsima3d. picsima3d. Available at: www.picsima.com Accessed January17 2017.
16. German RepRap GmbH. Available at: https://www.germanreprap.com/myfactory/web/cms/home-en.aspx?WPParams=43CCD7D4B5DDE6B7C2E0B1CDE1C8B6B79495 Accessed April30 2018.
17. Our Process. Carbon 3D. Available at: https://www.carbon3d.com/process/ Accessed May18 2018.
18. Lipton JI, , Cohen D, , Heinz M, et al. Fab@Home model 2: Towards ubiquitous personal fabrication devices. Solid Free Fabrciation Symp, 2009; 70–81.
19. 10.1126/sciadv.150065510.1126/sciadv.1500655 ↗
20. O'Bryan CS, , Bhattacharjee T, , Hart S, et al. Self-assembled micro-organogels for 3D printing silicone structures. Sci Adv, 2017; 3:e1602800.
21. 10.1021/acsbiomaterials.6b0017010.1021/acsbiomaterials.6b00170 ↗
22. 10.1002/adma.20170580810.1002/adma.201705808 ↗
23. 10.1557/mrs.2015.23510.1557/mrs.2015.235 ↗
24. 10.1038/nature2100310.1038/nature21003 ↗