One-Dimensional Modelling of Internal Ballistics
Source abstract
Abstract
A one-dimensional model is introduced in this paper for problems of internal ballistics involving solid propellant combustion. First, the work presents the physical approach and equations adopted. Closure relationships accounting for the physical phenomena taking place during combustion (interfacial friction, interfacial heat transfer, combustion) are deeply discussed. Secondly, the numerical method proposed is presented. Finally, numerical results provided by this code (UXGun) are compared with results of experimental tests and with the outcome from a well-known zero-dimensional code. The model provides successful results in firing tests of artillery guns, predicting with good accuracy the maximum pressure in the chamber and muzzle velocity what highlights its capabilities as prediction/design tool for internal ballistics.
Source: openalex_inverted_index · Quality: baseline
Research context
OpenAlex topics: Energetic Materials and Combustion · Electromagnetic Launch and Propulsion Technology · Rocket and propulsion systems research
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
Affiliations
,
EXPAL Systems S.A. (MAXAM Defence), Madrid, Spain
Funding
European Commission · Secretaría de Estado de Investigación, Desarrollo e Innovación
References (40)
Show source-provided references
1. Anderson, R. D., and K. D. Fickie. 1987. IBHVG2 – A User’s Guide, BRL-TR-2829. Aberdeen Proving Ground, MD, USA: U.S. Army Ballistic Research Laboratory.
2. 10.1016/0301-9322(86)90033-910.1016/0301-9322(86)90033-9 ↗
3. 10.1201/978142006619710.1201/9781420066197 ↗
4. 10.1016/0301-9322(88)90035-310.1016/0301-9322(88)90035-3 ↗
5. Crowley A. B. and A. D. Fitt 1986. Accurate flame spread modelling for granular and stick propellants. 9th International Symposium on Ballistics Shrivenham UK.
6. Dullien, F. A. 1991. Porous media: Fluid transport and pore structure. 2nd ed. San Diego, CA: Academic Press. ISBN-13: 978-0122236518.
7. Ergun, S. 1952. Fluid flow through packed columns. Chemical Engineering Progress 48:89–96.
8. Fraunhofer-Institut für Chemische Tecnologie. 2009. ICT Thermodynamic Code ICT-Code Munchen Germany.
9. 10.1016/j.compfluid.2014.05.01710.1016/j.compfluid.2014.05.017 ↗
10. 10.1016/j.nucengdes.2005.11.01310.1016/j.nucengdes.2005.11.013 ↗
11. 10.1016/j.fusengdes.2010.09.01410.1016/j.fusengdes.2010.09.014 ↗
12. Gelperin, N. I., and V. G. Einstein. 1971. Heat transfer in fluidized beds, 471–540. Fluidization. New York, NY, USA.
13. Gough P. S. 1974. The flow of a compressible gas through an aggregate of mobile reacting particles. PhD Thesis Department of Mechanical Engineering of McGill University.
14. Gough P. S. 1975. The predictive capacity of models of interior ballistics. Proceedings of the 12th JANNAF Combustion Meeting Newport RI USA.
15. 10.2514/3.6105710.2514/3.61057 ↗
16. 10.2514/3.6009610.2514/3.60096 ↗
17. International Test Operational Procedure (ITOP). 1993. Technical Report. U.S. Army Aberdeen Proving Ground MD 21005-5059. Defense Technical Information Center DTIC. www.dtic.mil.
18. Johnston, I. A. 2005. The Noble-Abel equation of state: Thermodynamic derivations for ballistics modelling, DTIC Document. Australia: Defense Science and Technology Organization.
19. 10.1016/j.compfluid.2006.06.00310.1016/j.compfluid.2006.06.003 ↗
20. 10.2514/4.86567110.2514/4.865671 ↗
21. 10.1016/S0017-9310(97)00173-710.1016/S0017-9310(97)00173-7 ↗
22. 10.1006/jcph.1996.025610.1006/jcph.1996.0256 ↗
23. 10.1016/j.jcp.2005.09.02010.1016/j.jcp.2005.09.020 ↗
24. 10.1016/0301-9322(86)90035-210.1016/0301-9322(86)90035-2 ↗
25. Nussbaum J. 2007. Modélisationet simulation numérique d’un écoulementdiphasique de la balistiqueintérieure. PhD Thesis Université Louis Pasteur-Strasbourg I.
26. 10.1002/fld.405610.1002/fld.4056 ↗
27. 10.1016/S0045-7930(02)00021-X10.1016/S0045-7930(02)00021-X ↗
28. Porterie, B. 1988. Modélisation de la phase d’allumaged’une charge propulsive en balistiqueintérieure, Theèsed’Etat. Marseille, France: Université de Aix Marseille.
29. Powers, J. M., D. S. Stewart, and H. Krier. 1987. Two-phase steady detonation analysis. NASA STI/Recon Technical Report N 89:12008.
30. Robbins, R., and P. S. Gough. 1978. An experimental determination of flow resistance in packed beds of gun propellant. Proceedings of the 15th JANNAF Combustion Meeting 297:35–59.
31. Rusanov, V. 1962. Calculation of interaction of non-steady shock waves with obstacles. J. Computational Math. Phys., 1:267–279.
32. Sheperd J. and D. Begeal 1985. Transient compressible flow in porous materials. SAND83-1788. Carlsbad NM: Sandia National Laboratories.
33. 10.1080/1061856950890451810.1080/10618569508904518 ↗
34. Tanaka T. and Y. Tsuji. 1991. Numerical simulation of gas-solid two-phase flow in a vertical pipe: On the effect of inter-particle collision. FED-Vol. 121 Gas-Solid Flows 123–28. ASME.
35. TM 43-0001-28. 1994. Army ammunition data sheets. Department of the Army Technical Manual (USA). Aberdeen, MD, USA.
36. TM 9-1300-214. 1984. Military explosives. Department of the Army Technical Manual (USA).Aberdeen, MD, USA.
37. 10.1002/(ISSN)1097-036310.1002/(ISSN)1097-0363 ↗
38. Vieille, P. 1893. Etude sur le mode de combustion des substancesexplosives. Paris, France: Gauthier-Villars.
39. Woodley C. 2005b. Modelling the ignition of 40mm gun charges 22nd International Symposium on Ballistics Vancouver Canada.
40. Woodley, C. R., S. Billett, C. Lowe, W. Speares, and E. Toro. 2005a. The FHIBS internal ballistics code. Proceedings of the 22nd International Symposium on Ballistics, pp. 322–329. Vancouver, Canada, 2005.