High performance and low floating fiber glass fiber-reinforced polypropylene composites realized by a facile coating method
Source abstract
Abstract
In this work, we reported a kind of low floating fiber, high-performance composites which were prepared by means of mixing polypropylene and polybutylene-1/glass fiber masterbatch. The polybutylene-1/glass fiber masterbatch prepared by coating method made the surface of glass fiber covered by a thin resin, and the as-prepared composites displayed significantly higher shear thinning, higher interface bonding strength, and lower crystallization temperature. The results of scanning electron microscope and atomic force microscope showed that the coating process could effectively hinder the exposure of glass fiber. And, the composites at the PB-1 content of 10 wt% showed higher flexural strength (142.0 MPa) and tensile strength (69.6 MPa) than those for PP (41.3 MPa and 31.4 MPa, respectively). Moreover, the behavior of possible stacking arrangements inside the composites was inferred in this study.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Fiber-reinforced polymer composites · Mechanical Behavior of Composites · Natural Fiber Reinforced Composites
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (31)
Show source-provided references
1. Roesner A, Scheik S, Olowinsky A, Gillner A, Reisgen U, Schleser M (2011) Laser assisted joining of plastic metal hybrids. Phys Procedia 12(1):370–37710.1016/j.phpro.2011.03.146 ↗
2. Han S-R, Park J-I, Cho J-R (2018) Development of plastic passenger air bag (PAB) housing for replacing the steel PAB housing and reducing the automobile weight. J Braz Soc Mech Sci Eng 40(4):224–23310.1007/s40430-018-1040-9 ↗
3. Suresh S, Senthil Kumar VS (2014) Experimental determination of the mechanical behavior of glass fiber reinforced polypropylene composites. Procedia Eng 97:632–64110.1016/j.proeng.2014.12.292 ↗
4. Gu S, Liu H, Li X, Mercier C, Li Y (2018) Interfacial designing of PP/GF composites by binary incorporation of MAH-g-PP and lithium bis(trifloromethanesulfonyl)imide: towards high strength composites with excellent antistatic performance. Compos Sci Technol 156:247–25310.1016/j.compscitech.2018.01.010 ↗
5. Yoshida T, Ishiaku US, Okumura H, Baba H, Hamada H (2006) The effect of molecular weight on the interfacial properties of GF/PP injection molded composites. Compos A: Appl Sci Manuf 37(12):2300–230610.1016/j.compositesa.2006.02.019 ↗
6. Bagherpour E, Ebrahimi R, Qods F (2015) An analytical approach for simple shear extrusion process with a linear die profile. Mater Des 83:368–37610.1016/j.matdes.2015.06.023 ↗
7. Han K-H, Im Y-T (2002) Numerical simulation of three-dimensional fiber orientation in injection molding including fountain flow effect. Polym Compos 23(2):222–23810.1002/pc.10427 ↗
8. Baert J, Puyvelde PV, Langouche F (2006) Flow-induced crystallization of PB-1: from the low shear rate region up to processing rates. Macromolecules 39(26):9215–922210.1021/ma062068q ↗
9. Wang Z, Dong X, Liu G, Xing Q, Cavallo D et al (2018) Interfacial nucleation in iPP/PB-1 blends promotes the formation of polybutene-1 trigonal crystals. Polymer 138:396–40610.1016/j.polymer.2018.01.078 ↗
10. Yang Y-J, Huang C-C, Tao J (2016) Application of ultrasonic-assisted injection molding for improving melt flowing and floating fibers. J Polym Eng 36(2):119–12810.1515/polyeng-2015-0042 ↗
11. Li X-P, Zhao G-Q, Yang C (2014) Effect of mold temperature on motion behavior of short glass fibers in injection molding process. Int J Adv Manuf Technol 73(5–8):639–64510.1007/s00170-014-5874-8 ↗
12. Li S-C, Hu H-L, Zeng W (2012) Preparation and properties of PB-1/PP blends. Polym-Plast Technol Eng 51(7):744–74910.1080/03602559.2012.663038 ↗
13. Ali FM, Maiz F (2018) Structural, optical and AFM characterization of PVA: La3+ polymer films. Physica B: Phys Condensed Matter 530:19–2310.1016/j.physb.2017.10.124 ↗
14. Nzioka AM, Kim YJ (2018) Surface analysis of glass fibres using XPS and AFM: case study of glass fibres recovered from the glass fibre reinforced polymer using chemical recycling. J Phys Conf Ser 953:01201210.1088/1742-6596/953/1/012012 ↗
15. Ardakani F, Jahani Y, Morshedian J (2013) The role of PB-1 on the long chain branching of PP by electron beam irradiation in solid state and melt viscoelastic behavior. Radiat Phys Chem 87:64–7010.1016/j.radphyschem.2013.02.021 ↗
16. Hadinata C, Gabriel C, Ruellmann M, Kao N, Laun HM (2006) Shear-induced crystallization of PB-1 up to processing-relevant shear rates. Rheol Acta 45(5):539–54610.1007/s00397-005-0057-z ↗
17. Li H, Cao Z, Wu D, Tao G, Zhong W et al (2016) Crystallisation, mechanical properties and rheological behaviour of PLA composites reinforced by surface modified microcrystalline cellulose. Mcromolecular Eng 45(4):181–187
18. Ajinjeru C, Kishore V, Lindahl J, Sudbury Z, Hassen AA et al (2018) The influence of dynamic rheological properties on carbon fiber-reinforced polyetherimide for large-scale extrusion-based additive manufacturing. Int J Adv Manuf Technol 99(1–4):411–41810.1007/s00170-018-2510-z ↗
19. Angel R-U (2018) Viscoelasticity and microstructure of POSS-methyl methacrylate nanocomposites. Dynamics and entanglement dilution. Polymer 148:27–3810.1016/j.polymer.2018.06.018 ↗
20. Linhares FN, Gabriel CFS, Sousa AMFD, Nunes RCR (2018) Mechanical and rheological properties of nitrile rubber/fluoromica composites. Appl Clay Sci 162:165–17410.1016/j.clay.2018.06.004 ↗
21. Lin G, Li D, Liu M, Zhang X, Zheng Y (2018) Rheology, non-isothermal crystallization behavior, mechanical and thermal properties of PMMA-modified carbon fiber-reinforced poly(ethylene terephthalate) composites. Polymers 10(6):59410.3390/polym10060594 ↗
22. Hao Y, Yang H, Pan H, Ran X, Zhang H (2018) The effect of MBS on the heat resistant, mechanical properties, thermal behavior and rheological properties of PLA/EVOH blend. J Polym Res 25:17110.1007/s10965-018-1547-x ↗
23. Goodarzi V, Jafari SH, Khonakdar HA, Seyfi J (2011) Morphology, rheology and dynamic mechanical properties of PP/EVA/clay nanocomposites. J Polym Res 18(6):1829–183910.1007/s10965-011-9590-x ↗
24. Jiang D, Liu L, Wu G, Zhang Q, Long J, Wu Z et al (2016) Mechanical properties of carbon fiber composites modified with graphene oxide in the interphase. Polym Compos 38(11):2425–243210.1002/pc.23828 ↗
25. Eitan A, Fisher FT, Andrews R, Brinson LC, Schadler LS (2006) Reinforcement mechanisms in MWCNT-filled polycarbonate. Compos Sci Technol 66(9):1162–117310.1016/j.compscitech.2005.10.004 ↗
26. Jacob M, Francis B, Thomas S, Varughese KT (2006) Dynamical mechanical analysis of sisal/oil palm hybrid fiber-reinforced natural rubber composites. Polym Compos 27(6):671–68010.1002/pc.20250 ↗
27. Ragoubi M, George B, Molina S, Bienaiméb D, Merlin A et al (2012) Effect of corona discharge treatment on mechanical and thermal properties of composites based on miscanthus fibres and polylactic acid or polypropylene matrix. Compos A: Appl Sci Manuf 43(4):675–68510.1016/j.compositesa.2011.12.025 ↗
28. López Manchado MA, Blagiotti J, Torre L, Kenny JM (2000) Effects of reinforcing fibers on the crystallization of polypropylene. Polym Eng Sci 40(10):2194–220410.1002/pen.11351 ↗
29. Frihi D, Layachi A, Gherib S, Stoclet G, Masenelli Varlot K et al (2016) Crystallization of glass-fiber-reinforced polyamide 66 composites: influence of glass-fiber content and cooling rate. Compos Sci Technol 130:70–7710.1016/j.compscitech.2016.05.007 ↗
30. Wang C, Bai S, Yue X, Long B, Choo-Smith LP (2016) Relationship between chemical composition, crystallinity, orientation and tensile strength of kenaf fiber. Fibers Polym 17(11):1757–176410.1007/s12221-016-6703-5 ↗
31. Grüber B, Hufenbach W, Kroll L, Lepper M, Zhou B (2007) Stress concentration analysis of fibre-reinforced multilayered composites with pin-loaded holes. Compos Sci Technol 67(7–8):1439–145010.1016/j.compscitech.2006.08.018 ↗