Effect of Gd and Cu on the Structural, Electrical, and Dielectric Properties of MnFeO3 Nanomaterials Synthesized by the Sol–Gel Method
Source abstract
Abstract
Substituted Gd x Mn1−x Fe1−y Cu y O3 (x = 0.0–1.0; y = 0.0–0.5) nanoparticles were synthesized by sol–gel auto-combustion, and the effect of Gd and Cu content on their structural, electrical, and dielectric properties was investigated. X-ray diffraction data confirmed formation of an orthorhombic single phase with crystallite size in the range 23–61 nm. Particle size was determined by scanning electron microscopy. Direct current electrical resistivity and activation energy were observed to increase from 2.14 × 107 to 7.46 × 1010 Ω cm and from 0.64 to 0.70 eV, respectively, with increasing substituent concentration, whereas drift mobility decreased from 3.27 × 10−13 to 1.19 × 10−16 cm2 V−1 S−1. Dielectric constant, dielectric loss, and dielectric loss factor decreased with increasing frequency and with increasing Gd and Cu content. These decreases in dielectric properties with increasing electrical resistivity suggest the materials could be used in microwave devices.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Multiferroics and related materials · Magnetic Properties and Synthesis of Ferrites · Dielectric properties of ceramics
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (41)
Show source-provided references
1. J.C. Maxwell, Phil. Trans. R. Soc. Lond. 155, 459 (1865).10.1098/rstl.1865.0008 ↗
2. G.A. Smolenskii and I.E. Chupis, Ferroelectromagnets 137, 415 (1982).
3. X. Wang, X. Chen, L. Gao, H. Zheng, M. Ji, T. Shen, and Z. Zhang, J. Cryst. Growth 256, 123 (2003).10.1016/S0022-0248(03)01289-2 ↗
4. H. Schmid, Ferroelectrics 162, 317 (1994).10.1080/00150199408245120 ↗
5. N.A. Hill, J. Phys. Chem. B 104, 6694 (2000).10.1021/jp000114x ↗
6. M.E. Lines and A.M. Glass, Principles and Applications of Ferroelectrics and Related Materials (Oxford: Oxford University Press, 2001), p. 163.10.1093/acprof:oso/9780198507789.001.0001 ↗
7. D.I. Khomskii, Magn. Ferroelectr. Bull. Am. Phys. Soc. C 21, 002 (2001).
8. T. Katsufuji, Phys. Rev. B 64, 104419 (2001).10.1103/PhysRevB.64.104419 ↗
9. M.M. Mataev, N.O. Myrzahmetova, N.A. Zhumanova, ZhK Kuanysheva, M.A. Nurbekova, and M.R. Abdraimova, World Appl. Sci. J 21, 1032 (2013).
10. M. Tokunaga, Front. Phys. 7, 386 (2012).10.1007/s11467-011-0203-2 ↗
11. M.A. Ahmed, S.F. Mansour, and H. Ismael, J. Magn. Magn. Mater. 378, 376 (2015).10.1016/j.jmmm.2014.10.173 ↗
12. K.S. Kumar, P. Aswini, and C. Venkateswarah, J. Magn. Magn. Mater. 364, 60 (2014).10.1016/j.jmmm.2014.04.008 ↗
13. W.L. Lee, H.J. Yun, and J.W. Yoon, J. Alloys Compd. 583, 320 (2014).10.1016/j.jallcom.2013.08.191 ↗
14. J. Shah and R.K. Kotnala, Scr. Mater. 67, 316 (2012).10.1016/j.scriptamat.2012.05.003 ↗
15. N. Zhang, S. Dong, F.G. Chang, Z.M. Fu, and J.M. Liu, Phys. B 407, 3736 (2012).10.1016/j.physb.2012.05.053 ↗
16. S. Rayaprol, S.D. Kaushik, P.D. Babu, and V. Siruguri, Proceedings of the 57th DAE Solid State Physics Symposium 2012, AIP Conference Proceedings. Vol 1512 (2013), pp. 1132–1133.
17. T.I. Hua and R. Sundari, Malays. J. Fundam. Appl. Sci. 8, 149 (2012).
18. Y. Bai, F. Xu, L. Qiao, and J. Zhou, J. Alloys Compd. 473, 505 (2009).10.1016/j.jallcom.2008.06.011 ↗
19. S.Y. Tong, J.M. Wu, M.J. Tung, W.S. Ko, Y.T. Huang, and Y.P. Wang, J. Alloys Compd. 525, 143 (2012).10.1016/j.jallcom.2012.02.093 ↗
20. J. Chand, S. Verma, and M. Singh, J. Alloys Compd. 552, 264 (2013).10.1016/j.jallcom.2012.10.041 ↗
21. N.Y. Mostafa, M.M. Hessien, and A.A. Shaltout, J. Alloys Compd. 529, 29 (2012).10.1016/j.jallcom.2012.03.060 ↗
22. M. Ahmad, I. Ali, R. Grössinger, M. Kriegisch, F. Kubel, and M.U. Rana, J. Alloys Compd. 579, 57 (2013).10.1016/j.jallcom.2013.04.115 ↗
23. A. Pradeep, P. Priyadharsini, and G. Chandrasekaran, J. Mater. Chem. Phys. 112, 572 (2008).10.1016/j.matchemphys.2008.05.090 ↗
24. T.J. Shinde, A.B. Gadkari, and P.N. Vasambekar, J. Alloys Compd. 513, 80 (2012).10.1016/j.jallcom.2011.10.001 ↗
25. A. Verma, O. Thakur, C. Prakash, T. Goel, and R. Mendiratta, Mater. Sci. Eng. B 116, 1 (2005).10.1016/j.mseb.2004.08.011 ↗
26. A.B. Nawale, N.S. Kanhe, K.R. Patil, S.V. Bhoraskar, V.L. Mathe, and A.K. Das, J. Alloys Compd. 509, 4404 (2011).10.1016/j.jallcom.2011.01.057 ↗
27. Y. Kinemuchi, K. Ishizaka, H. Suematsu, W. Jiang, and K. Yatsui, Thin Solid Films 407, 109 (2002).10.1016/S0040-6090(02)00021-4 ↗
28. N. Rezlescu, E. Rezlescu, P.D. Popa, C. Doroftei, and M. Ignat, Compos. B 60, 515 (2014).10.1016/j.compositesb.2014.01.006 ↗
29. N.A. Merino, B.P. Barbero, P. Grange, and L.E. Cadus, J. Catal. 231, 232 (2005).10.1016/j.jcat.2005.01.003 ↗
30. B. Kucharczyk and W. Tylus, Appl. Catal. A 335, 28 (2008).10.1016/j.apcata.2007.11.004 ↗
31. M.G. Ferreira da Silva and M.A. Valente, Mater. Chem. Phys. 132, 264 (2012).10.1016/j.matchemphys.2011.10.030 ↗
32. T.W. Lambe, Soil Testing for Engineers (New York: Wiley, 1951), p. 165.
33. W.D. Kingery, H.K. Bowen, and D.R. Uhlmann, Introduction to Ceramics, 2nd ed. (New York: Wiley, 1976), p. 913.
34. N. Rezlescu and E. Rezlescu, J. Solid State Connect. 88, 139 (1993).10.1016/0038-1098(93)90395-4 ↗
35. N. Rezlescu, E. Rezlescu, P.D. Popa, and L. Rezlescu, J. Alloys Compd. 275, 657 (1998).10.1016/S0925-8388(98)00413-7 ↗
36. N. Rezlescu, E. Rezlescu, C. Pasnicu, and M.L. Craus, J. Phys 6, 5707 (1994).
37. D.M. Jordan, K. Malik, R.G. Falster, and P.R. Wilshaw, Solid State Phenom. 156–158, 101 (2010).
38. G.L. Sun, J.B. Li, J.J. Sun, and X.Z. Yang, J. Magn. Magn. Mater. 281, 173 (2004).10.1016/j.jmmm.2004.04.099 ↗
39. D. Ravinder and P.V.B. Reddy, Mater. Lett. 57, 4344 (2003).10.1016/S0167-577X(03)00093-4 ↗
40. J.C. Maxwell, Electricity and Magnetism, Vol. 2 (New York: Oxford University Press, 1973), p. 828.
41. Y.P. Wang, L. Zhou, M.F. Zhang, X.Y. Chen, J.M. Liu, and Z.G. Liu, Appl. Phys. Lett. 84, 1731 (2004).10.1063/1.1667612 ↗