journal article·2014-09

Enhancing the Thermoelectric Properties of Ca3Co4O9 Thin Films by the Addition of a Nanoscale NbN x Second Phase

Chunhui Zhu, Zhuangzhi Li, Heping An, Guide Tang, Denglu Hou

Journal of Electronic Materials· Volume 43· Issue 9
Publisher page

Abstract

High-quality Ca3Co4O9 (CCO) thin films have been epitaxially grown on c-cut Al2O3 single crystal substrates using pulsed laser deposition (PLD). Different doses of Nb ions were injected into the films using an ion beam injection technique, and a nanoscale NbN x second phase was generated in the films after annealing in pure N2. The resistivity and Seebeck coefficient of the films were measured in the temperature range 175–375 K. The results demonstrated that the power factor of the films increases when injected with appropriate quantities of Nb. When the injected Nb concentration was 1.46 × 1020/cm3, the power factor of the film reached 0.17 mW/m K2 at room temperature, which is nearly twice as large as that for pure CCO film. A maximum value of 0.22 mW/m K2 was obtained at 375 K.
Source: openaire · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Advanced Thermoelectric Materials and Devices · Gas Sensing Nanomaterials and Sensors · Thermal Expansion and Ionic Conductivity

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (32)

Show source-provided references
1. I. Matsubara, R. Funahashi, T. Takeuchi, S. Sodeoka, T. Shimizu, and K. Ueno, Appl. Phys. Lett. 78, 3627 (2001).10.1063/1.1376155 ↗
2. G.J. Snyder and E.S. Toberer, Nat. Mater. 7, 105 (2008).10.1038/nmat2090 ↗
3. L. Han, Y. Jiang, S.Y. Li, H.M. Su, X.Z. Lan, K.X. Qin, T.T. Han, H.H. Zhong, L. Chen, and D.B. Yu, J Alloys Compd 509, 8970 (2011).10.1016/j.jallcom.2011.06.113 ↗
4. A.C. Masset, C. Michel, A. Maiganan, M. Hervieu, O. Toulemonde, F. Studer, B. Raveau, and J. Hejtmanek, Phys Rev B 62, 166 (2000).10.1103/PhysRevB.62.166 ↗
5. M. Prevel, S. Lemonnier, Y. Klein, S. Hébert, D. Chateigner, B. Ouladdiaf, and J.G. Noudem, J. Appl. Phys. 98, 093706 (2005).10.1063/1.2120892 ↗
6. H.W. Eng, W. Prellier, S. Hebert, and D. Grebille, J. Appl. Phys. 97, 013706 (2005).10.1063/1.1823582 ↗
7. K. Biswas, J.Q. He, I.D. Blum, C.I. Wu, T.P. Hogan, D.N. Seidman, V.P. Dravid, and M.G. Kanatzidis, Nature 489, 414 (2012).10.1038/nature11439 ↗
8. J.W. Fergus, J. Eur. Ceram. Soc. 32, 525 (2012).10.1016/j.jeurceramsoc.2011.10.007 ↗
9. H. Ohta, K. Sugiura, and K. Koumoto, Inorg. Chem. 47, 8429 (2008).10.1021/ic800644x ↗
10. A. Bhaskar, C.-S. Jhang, and C.-J. Liu, J. Electron. Mater. 42, 2582 (2013).10.1007/s11664-013-2634-8 ↗
11. N.V. Nong, N. Pryds, S. Linderoth, and M. Ohtak, Adv. Mater. 23, 2484 (2011).10.1002/adma.201004782 ↗
12. Y. Wang, Y. Sui, J.J. Cheng, X.J. Wang, and W.H. Su, J. Phys. D Appl. Phys. 41, 045406 (2008).10.1088/0022-3727/41/4/045406 ↗
13. M. Mikami, N. Andoa, and R. Funahashi, J. Solid State Chem. 178, 2186 (2005).10.1016/j.jssc.2005.04.027 ↗
14. T. Sun, H.H. Hng, Q.Y. Yan, and J. Ma, J. Alloys Compd. 511, 133 (2012).10.1016/j.jallcom.2011.09.008 ↗
15. C.H. Zhu, H.P. An, W.W. Ge, Z.Z. Li, and G.D. Tang, J. Alloys Compd. 567, 122 (2013).10.1016/j.jallcom.2013.03.069 ↗
16. J.F. Ziegler, Software for the stopping and range of ions in matter, homepage: http://www.srim.org .
17. J.G. Speight, Lange’s Handbook of Chemistry, 16th ed. (New York: McGraw-Hill, 2005).
18. K. Tanabe, H. Asano, Y. Katoh, and O. Michikami, J. Appl. Phys. 63, 1733 (1988).10.1063/1.339910 ↗
19. S. Reiff, R. Huber, P. Ziemann, and A.B. Kaiser, J. Phys. 1, 10107 (1989).
20. R. Sanjines, M. Benkahoul, C.S. Sandu, P.E. Schmid, and F. Levy, Thin Solid Films 494, 190 (2006).10.1016/j.tsf.2005.07.185 ↗
21. Y. Wang, N.S. Rogado, R.J. Cava, and N.P. Ong, Nature 423, 425 (2003).10.1038/nature01639 ↗
22. A.J. Bosman and J. Daal, Adv. Phys. 19, 1 (1970).10.1080/00018737000101071 ↗
23. C.J. Liu, L.C. Huang, and J.S. Wang, Appl. Phys. Lett. 89, 204102 (2006).10.1063/1.2390666 ↗
24. Y. Wang, Y. Sui, J.G. Cheng, X.J. Wang, and W.H. Su, J. Alloys Compd. 477, 817 (2009).10.1016/j.jallcom.2008.10.162 ↗
25. Y. Wang, Y. Sui, P. Ren, L. Wang, X.J. Wang, W.H. Su, and H.J. Fan, Chem. Mater. 22, 1155 (2010).10.1021/cm902483a ↗
26. M. Cutler and N.F. Mott, Phys. Rev. 181, 1336 (1969).10.1103/PhysRev.181.1336 ↗
27. G. Xu, R. Funahashi, M. Shikano, I. Matsubara, and Y. Zhou, Appl. Phys. Lett. 80, 3760 (2002).10.1063/1.1480115 ↗
28. G. Xu, R. Funahashi, M. Shikano, Q. Pu, and B. Liu, Solid State Commun. 124, 73 (2002).10.1016/S0038-1098(02)00495-7 ↗
29. M. Mikami, K. Chong, Y. Miyazaki, T. Kajitani, T. Inoue, S. Sodeoka, and R. Funahashi, Jpn. J. Appl. Phys. 45, 4131 (2006).10.1143/JJAP.45.4131 ↗
30. Y.F. Zhang and J.X. Zhang, J. Mater. Process. Tech. 208, 70 (2008).10.1016/j.jmatprotec.2007.12.093 ↗
31. M. Shikano and R. Funahashi, Appl. Phys. Lett. 82, 1851 (2003).10.1063/1.1562337 ↗
32. G.S. Nolas, J. Sharp, and H.J. Goldsmid, Thermoelectrics basic principles and new materials developments (New York: Springer, 2001).10.1007/978-3-662-04569-5 ↗