Improving the ductility of high-strength biodegradable ZnMg alloys through Al, Mn, and Cu microalloying: in vitro evaluation
Source abstract
Abstract
ZnMg alloys are promising biodegradable materials for orthopedic and cardiovascular implants due to their favorable strength, biocompatibility, and degradation behavior. However, their ductility is often compromised by the brittle Mg2Zn11 intermetallic phase. In this study, we improved the ductility of high-strength ZnMg alloys through microalloying with Al, Mn, and Cu. Two multicomponent alloys-Zn-0.05 Mg-0.2 Al-0.2 Mn-0.2 Cu (ZA-0.05 Mg) and Zn-0.5 Mg-0.2Al-0.2Mn-0.2Cu (ZA-0.5 Mg)-were designed and compared with binary Zn-0.05 Mg and Zn-0.5 Mg references. Microstructural analysis reveals that microalloying promotes the formation of new Al11Mn4 and Al10MnZn89 phases, which facilitate grain refinement and contribute to dislocation accumulation. Mechanical tests demonstrate that the ZA-0.05 Mg alloy exhibits the most balanced mechanical properties, achieving yield strength (YS) of 249 ± 1.8 MPa, ultimate tensile strength (UTS) of 319 ± 2.5 MPa, and an elongation of 50.8 ± 2.0%-representing a 31.2% enhancement in ductility over the binary Zn-0.05 Mg benchmark while maintaining higher strength. Microalloying further improves hardness and wear resistance, as reflected in a reduced friction coefficient and lower wear loss. Corrosion tests reveal that the introduced second phases moderately accelerate degradation. The ZA-0.05 Mg alloy exhibits a corrosion rate of 0.495 mm/year (electrochemical) and 0.365 mm/year (immersion), approaching the ideal 0.5 mm/year for orthopedic implants. In vitro biocompatibility assessments confirm excellent cytocompatibility, hemocompatibility (hemolysis rate < 5%), and strong antibacterial performance, even with the incorporation of trace Al. This study provides both theoretical insight and experimental evidence for achieving high strength and high ductility in Zn-Mg-based biodegradable alloys.
Source: europepmc · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Magnesium Alloys: Properties and Applications · Aluminum Alloys Composites Properties · Aluminum Alloy Microstructure Properties
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (82)
Show source-provided references
1. Biodegradable metals10.1016/j.mser.2014.01.001 ↗
2. Bio-functionalization of biomedical metals10.1016/j.msec.2016.06.067 ↗
3. Biodegradable metallic bone implants10.1039/C8QM00507A ↗
4. Advances in Fe-based biodegradable metallic materials10.1039/C6RA20594A ↗
5. Design strategy for biodegradable Fe-based alloys for medical applications10.1016/j.actbio.2009.07.039 ↗
6. A review on magnesium alloys as biodegradable materials10.1007/s11706-010-0024-1 ↗
7. Mechanical properties, corrosion resistance, and osteogenic potential of biodegradable Mg-Zn-Mn-Ca alloys10.1016/j.jmrt.2025.04.217 ↗
8. Biodegradable Zn-xY alloys with enhanced osteogenesis and angiogenesis effects for bone implant applications10.1016/j.actbio.2025.05.048 ↗
9. Stronger and coarser-grained biodegradable zinc alloys10.1038/s41586-024-08415-8 ↗
10. Exploring the degradation behavior of biodegradable metals (Mg, Zn, and Fe) in human duodenal fluid10.1016/j.jma.2025.02.034 ↗
11. Effects of trace amounts of lithium on the microstructure, mechanical properties, corrosion behavior, antibacterial activity and biocompatibility of Zn-Cu alloy10.1007/s10853-024-09927-4 ↗
12. Mechanical and corrosion properties of newly developed biodegradable Zn-based alloys for bone fixation10.1016/j.actbio.2011.05.008 ↗
13. Research status and future prospects of biodegradable Zn-Mg alloys10.1016/j.jallcom.2024.174669 ↗
14. Biodegradable Zn-0.8Mg-0.2Sr alloy as an internal fixation material exhibits controlled degradation with enhanced osteogenesis10.1039/D5RA02009C ↗
15. Modulation of osteogenesis and angiogenesis activities based on ionic release from Zn-Mg alloys10.3390/ma15207117 ↗
16. Dual-sized macro-micro porous biodegradable Zn-Mg-β-TCP scaffolds for bone defect repair: In vitro and in vivo evaluation10.1016/j.jmst.2025.03.098 ↗
17. Structural, mechanical and cytotoxicity characterization of as-cast biodegradable Zn-xMg (x= 0.8–8.3%) alloys[J]
18. Novel Zn-based alloys for biodegradable stent applications: design, development and in vitro degradation10.1016/j.jmbbm.2016.03.018 ↗
19. Effects of deformation twinning on the mechanical properties of biodegradable Zn-Mg alloys
20. Structural and mechanical aspects of hypoeutectic Zn-Mg binary alloys for biodegradable vascular stent applications
21. Novel high-strength, low-alloys Zn-Mg (< 0.1 wt% Mg) and their arterial biodegradation10.1016/j.msec.2017.11.021 ↗
22. Regulating mechanical properties and degradation behavior of biodegradable Zn-0.6Mg alloy via ECAP plus cold rolling10.1016/j.jallcom.2022.168487 ↗
23. Effect of Mn content on the microstructure and mechanical properties of as-extruded Zn-0.2 Mg-Mn (wt%) alloys10.1016/j.matchar.2022.112400 ↗
24. High-strength and high-ductility low-alloy biodegradable Zn-Mg-Li alloy via hybrid extrusion-ECAP processing: in vitro and in vivo study10.1016/j.jallcom.2025.182884 ↗
25. Systemically study of microstructure, mechanical and corrosion properties in biodegradable Zn-0.5Mn-0.2Mg alloys by rolling and heat treatment10.1016/j.jallcom.2025.179774 ↗
26. Effect of Mn on microstructures and properties of backward extruded Zn-0.5Mg alloys10.1016/j.jmrt.2025.01.148 ↗
27. Influence of microalloying and homogenization on the microstructures and mechanical properties of as-extruded Zn alloys
28. A strategy to simultaneously improve mechanical properties and biocompatibility of biodegradable Zn-Cu alloys as potential vascular stents10.1016/j.jallcom.2025.179468 ↗
29. Investigation on microstructures, mechanical properties and in vitro corrosion behavior of novel biodegradable Zn-2Cu-0.01Ti-xLi alloys10.1016/j.jallcom.2021.161529 ↗
30. An in vitro and in vivo study of biodegradable Zn-Cu-Li alloy with high strength and ductility fabricated by hot extrusion combined with room-temperature ECAP10.1016/j.jmrt.2024.10.110 ↗
31. Biodegradable Zn-Li-Mn alloy to achieve optimal strength and ductility for bone implants10.1016/j.actbio.2025.04.056 ↗
32. Effects of homogenization temperature on microstructure, mechanical properties and corrosion behavior of binary Zn-Mn alloys extruded at different temperatures
33. Occurrence, exposure, effects, recommended intake and possible dietary use of selected trace compounds (aluminium, bismuth, cobalt, gold, lithium, nickel, silver)10.3109/09637486.2014.937801 ↗
34. Corrosion of magnesium alloy AZ31 screws is dependent on the implantation site[J]10.1016/j.mseb.2011.02.010 ↗
35. In vivo corrosion of four magnesium alloys and the associated bone response10.1016/j.biomaterials.2004.09.049 ↗
36. In vivo corrosion and corrosion protection of magnesium alloy LAE44210.1016/j.actbio.2009.10.012 ↗
37. Standard practice for calculation of corrosion rates and related information from electrochemical measurements
38. Standard practice for laboratory immersion corrosion testing of metals
39. Effects of Ag, Cu or Ca addition on microstructure and comprehensive properties of biodegradable Zn-0.8 Mn alloy10.1016/j.msec.2019.02.044 ↗
40. Achieving high strength, excellent ductility, and suitable biodegradability in a Zn-0.1 Mg alloy using room-temperature ECAP10.1016/j.jallcom.2022.166906 ↗
41. A bimodal grain structured Zn-0.4 Mg-0.02 Mn alloy with superior strength-ductility synergy10.1016/j.msea.2022.144514 ↗
42. 300 MPa grade biodegradable high-strength ductile low-alloy (BHSDLA) Zn-Mn-Mg alloys: An in vitro study10.1016/j.jmst.2022.08.015 ↗
43. A bimodal grain structured Zn–0.5 Ag–0.2 Mg alloy with high strength and ductility achieved through combined ECAP and cold rolling10.1016/j.jmrt.2023.03.217 ↗
44. Effect of ECAP on the microstructure and mechanical properties of Zn-0.5 Ag-0.08 Mg alloy10.1016/j.jmrt.2023.06.125 ↗
45. A high-strength and high-ductility Zn–Ag alloy achieved through trace Mg addition and ECAP10.1016/j.msea.2023.145381 ↗
46. A high strength and ductility Zn–Cu–Mg alloy achieved by bandlike distribution of ultra-fine CuZn5 and Mg2Zn11 particles10.1016/j.msea.2022.143584 ↗
47. Fine-tuning of mechanical properties in a Zn–Ag–Mg alloy via cold plastic deformation process and post-deformation annealing
48. Significantly enhanced strength-ductility synergy in an ECAP processed Zn-3.5 Ag-0.08 Mg alloy via lowering processing temperature10.1016/j.msea.2023.145615 ↗
49. Long-term in vitro corrosion behavior of Zn-3Ag and Zn-3Ag-0.5 Mg alloys considered for biodegradable implant applications10.1016/j.matdes.2021.110289 ↗
50. Methods for improving the properties of zinc for the application of biodegradable vascular stents10.1016/j.bioadv.2023.213693 ↗
51. Tribological properties of titanium alloy with micro-nano multiscale texturing against bone under simulated implant contact conditions10.1016/j.triboint.2024.109586 ↗
52. Exploring tribology and material contact science in spine surgery: implications for implant design10.3171/2024.1.SPINE231047 ↗
53. Comparative study on structure, corrosion properties and tribological behavior of pure Zn and different Zn-Ni alloy coatings10.1016/j.matchemphys.2016.08.026 ↗
54. In situ development of a Zn-Mg-Mg2Si alloy for a biodegradable bone implant applications10.1016/j.matlet.2023.134276 ↗
55. Biodegradable Zn-Cu-Li alloys with ultrahigh strength, ductility, antibacterial ability, cytocompatibility, and suitable degradation rate for potential bone-implant applications
56. Corrosion mechanism and tribological behavior of biodegradable Zn-0.8Cu alloy fabricated by selective laser melting
57. Corrosion behavior of Mg2Zn11 and MgZn2 single phases10.3365/KJMM.2013.51.6.413 ↗
58. Investigation on the properties and degradation mechanisms of biodegradable Zn-Mg-Ag-Ti alloys
59. Effect of grain size and volume fraction of eutectic structure on mechanical properties and corrosion behavior of as-cast Zn–Mg binary alloys10.1016/j.jmrt.2021.12.101 ↗
60. Fabrication of biodegradable Zn-Al-Mg alloy: mechanical properties, corrosion behavior, cytotoxicity and antibacterial activities10.1016/j.msec.2016.11.138 ↗
61. Eric · 2009
62. Hemocompatibility of biodegradable Zn-0.8 wt.% (cu, Mn, Li) alloys10.1016/j.msec.2019.109896 ↗
63. Anti-friction and anti-infection properties on biomedical Ti3Zr2Sn3Mo25Nb alloy driven by high-precision cross-elliptical micro-texture and copper coating10.1016/j.triboint.2024.109990 ↗
64. Potential biodegradable Zn-Cu binary alloys developed for cardiovascular implant applications10.1016/j.jmbbm.2017.05.013 ↗
65. Influence of heat treatment on the microstructure evolution and corrosion performance of biodegradable Zn-Mg alloys
66. The particle stimulated nucleation in Ti-35V-15Cr-0.3Si-0.1C alloy10.1016/j.matlet.2015.12.104 ↗
67. Dislocation depinning from ordered nanophases in a model fcc crystal: from cutting mechanism to Orowan loopping[J]10.1016/j.actamat.2010.06.018 ↗
68. 300 MPa grade highly ductile biodegradable Zn-2Cu-(0.2-0.8) Li alloys with novel ternary phases10.1016/j.jmst.2023.01.048 ↗
69. Recent progress of novel biodegradable zinc alloys: from the perspective of strengthening and toughening10.1016/j.jmrt.2022.01.004 ↗
70. 380 MPa-30% grade biodegradable Zn-Mn-Mg-Ca alloy: bimodal grain structure, large work-hardening strain, and enhanced biocompatibility10.1016/j.actbio.2024.12.050 ↗
71. A novel cobweb-like sub-grain structured Al-Cu-Mg alloy with high strength-plasticity synergy10.1016/j.ijplas.2024.104178 ↗
72. Achieving superior strength-ductility balance by tailoring dislocation density and shearable GP zone of extruded Al-Cu-Li alloy10.1016/j.ijplas.2024.104135 ↗
73. Effect of grain size on corrosion: a review10.5006/1.3462912 ↗
74. Feasibility, challenges and future prospects of biodegradable zinc alloys as orthopedic internal fixation implants
75. Protection against zinc toxicity by metallothionein and zinc transporter 110.1073/pnas.0401022101 ↗
76. Orchestration of energy metabolism and osteogenesis by Mg2+ facilitates low-dose BMP-2-driven regeneration
77. Blood-contacting biomaterials: in vitro evaluation of the hemocompatibility10.3389/fbioe.2018.00099 ↗
78. Biomaterial and cellular implants: Foreign surfaces where immunity and coagulation meet[J]10.1182/blood.2020007209 ↗
79. A biodegradable Zn-4Cu-2Se alloy with enhanced work-hardening, antibacterial, and anti-tumor properties for orthopedic applications10.1016/j.actbio.2025.06.028 ↗
80. Crosstalk between the mitochondrial dynamics and oxidative stress in zinc-induced cytotoxicity10.1007/s12011-022-03504-z ↗
81. A biodegradable Zn-1Cu-0.1Ti alloy with antibacterial properties for orthopedic applications10.1016/j.actbio.2020.02.017 ↗
82. Ultrahigh antibacterial response and biochemical activity in Mg-Sn-HA material systems10.1016/j.matdes.2025.114495 ↗