journal article·2022-02

Arg−Gly−Asp peptide functionalized poly-amino acid/ poly (p-benzamide) copolymer with enhanced mechanical properties and osteogenicity

Lichao Chen, Bo Wang, Haohao Ren, Yanan Wu, Defu Lyu, Yanan Ouyang, Qiyi Zhang, Yonggang Yan

Publisher page

Abstract

Poly-amino acid (PAA) is a promising biomaterial in biomedical engineering due to its similar amide bond structure to collagen and excellent biocompatibility, but the lack of osteogenic activity and inferior mechanical strength limit its long-term application in orthopedics. In this study, a poly-amino acid/poly (p-benzamide) (PAA-PBA) copolymer with high mechanical strength was designed and fabricated by the method of solution polymerization. The chain structures, thermal properties and mechanical properties of these polymers were evaluated and results showed that PBA greatly promoted the mechanical properties of PAA, and the copolymer performed the maximum mechanical strengths with compressive strength, bending strength and tensile strength of 123 MPa, 107 MPa and, 95 MPa, respectively. To increase the bioactivity of surface, a bioactive coating that consists of poly-(dopamine) (PDA) nanolayers and tripeptide Arginine-Glycine-Aspartic acid (RGD) on sulfonated PAA-PBA copolymer was created. A porous structure appeared on the surface after modification, the surface roughness and hydrophilicity of copolymer has been improved obviously after introducing PDA and RGD peptide coating. The in vitro bioactivity evaluation demonstrated that the RGD-functionalized sample showed a significantly improved ability to promote bone apatite mineralization, cell adhesion, proliferation and osteogenic differentiation. In a word, such a strategy of material synthesis and surface modification method shows a great potential for broadening the use of PAA in the application of load-bearing bone substitute biomaterials.
Source: europepmc · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Polymer Surface Interaction Studies · Bone Tissue Engineering Materials · biodegradable polymer synthesis and properties

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (58)

Show source-provided references
1. Improving the mechanical properties of strontium nitrate doped dicalcium phosphate cement nanoparticles for bone repair application10.1016/j.ceramint.2021.02.002 ↗
2. Cytocompatibility of brushite and monetite cell culture scaffolds made by three-dimensional powder printing10.1016/j.actbio.2008.08.019 ↗
3. Additive manufacturing of biomaterials10.1016/j.pmatsci.2017.08.003 ↗
4. Processing and mechanical properties of autogenous titanium implant materials10.1023/A:1014344819558 ↗
5. Review on titanium and titanium based alloys as biomaterials for orthopaedic applications10.1016/j.msec.2019.04.064 ↗
6. Developments of PEEK (Polyetheretherketone) as a biomedical material: a focused review
7. Osteoconductive enhancement of polyether ether ketone: a mild covalent surface modification approach10.1021/acsabm.8b00274 ↗
8. Enhanced osteointegration on tantalum-implanted polyetheretherketone surface with bone-like elastic modulus10.1016/j.biomaterials.2015.02.018 ↗
9. Preparation, characterization and in vitro biological evaluation of a novel pearl powder/poly-amino acid composite as a potential substitute for bone repair and erconstruction10.3390/polym11050831 ↗
10. Analyzing the behavior of a porous nano-hydroxyapatite/polyamide 66 (n-HA/PA66) composite for healing of bone defects10.2147/IJN.S52990 ↗
11. Mechanics, degradability, bioactivity, in vitro, and in vivo biocompatibility evaluation of poly (amino acid)/hydroxyapatite/ calcium sulfate composite for potential load-bearing bone repair10.1177/0885328215620711 ↗
12. Cerium-doped hydroxyapatite /collagen coatings on titanium for bone implants10.1016/j.ceramint.2018.07.290 ↗
13. Calcium silicate improved bioactivity and mechanical properties of poly(3-hydroxybutyrate-co-3-hydroxyvalerate) scaffolds10.3390/polym9050175 ↗
14. Mechanical properties and in vitro response of strontium-containing hydroxyapatite/polyetheretherketone composites10.1016/j.biomaterials.2009.04.016 ↗
15. Multiscale toughening mechanisms in biological materials and bioinspired designs10.1002/adma.201901561 ↗
16. Modification of nylon-6 with semirigid and wholly-rigid aromatic polyamides10.1007/BF01154678 ↗
17. Melt polymerized aramid/polycaprolactam copolymer and its fiber10.1002/pi.4579 ↗
18. Structure of polyamide 6 and poly (p-benzamide) in their rod-coil-rod triblock copolymers investigated with in situ wide angle x-ray diffraction10.1016/j.polymer.2010.12.058 ↗
19. Biological materials: functional adaptations and bioinspired designs10.1016/j.pmatsci.2012.03.001 ↗
20. The future of biologic coatings for orthopaedic implants10.1016/j.biomaterials.2013.01.074 ↗
21. Bioinspired surface modification of orthopedic implants for bone tissue engineering10.1016/j.biomaterials.2019.119366 ↗
22. Fabrication aspects of porous biomaterials in orthopedic applications: a review10.1021/acsbiomaterials.7b00615 ↗
23. Cytocompatibility, osseointegration, and bioactivity of three-dimensional porous and nanostructured network on polyetheretherketone10.1016/j.biomaterials.2013.08.071 ↗
24. Mixed modification of the surface microstructure and chemical state of PEEK to improve its antimicrobial activity, hydrophilicity, cell adhesion and bone integration10.1021/acsbiomaterials.9b01148 ↗
25. Synthesis and characterization of sulfonated PEEK-WC-PES copolymers for fuel cell proton exchange membrane application10.1016/j.eurpolymj.2017.06.013 ↗
26. Mussel-inspired polydopamine coating as a universal route to hydroxyapatite crystallization10.1002/adfm.200902347 ↗
27. Mussel-inspired dendritic polymers as universal multifunctional coatings10.1002/anie.201407113 ↗
28. Graphene oxide and adiponectin-functionalized sulfonated poly(etheretherketone) with effective osteogenicity and remotely repeatable photodisinfection10.1021/acs.chemmater.0c00290 ↗
29. Mussel-inspired surface chemistry for multifunctional coatings10.1126/science.1147241 ↗
30. Polydopamine surface chemistry: a decade of discovery10.1021/acsami.7b19865 ↗
31. Fibronectin-bound α5β1 integrins sense load and signal to reinforce adhesion in less than a second10.1038/nmat5023 ↗
32. Dual RGD-immobilized poly(L-lactic acid) by atmospheric pressure plasma jet for bone tissue engineering10.1016/j.colsurfb.2019.03.030 ↗
33. Peptide-functionalized nanostructured microarchitectures enable rapid mechanotransductive differentiation10.1021/acsami.9b13694 ↗
34. Surface functionalization via PEO coating and RGD peptide for nanostructured titanium implants and their in vitro assessment10.1016/j.surfcoat.2018.10.068 ↗
35. The osteoinduction of RGD and mg ion functionalized bioactive zirconia coating10.1007/s10856-019-6298-7 ↗
36. Dual RGD-immobilized poly(L-lactic acid) by atmospheric pressure plasma jet for bone tissue engineering10.1016/j.colsurfb.2019.03.030 ↗
37. Peptide-functionalized zirconia and new zirconia/titanium biocermets for dental applications10.1016/j.jdent.2015.06.002 ↗
38. RGD peptide-based non-viral gene delivery vectors targeting integrin αvβ3 for cancer therapy10.1080/1061186X.2018.1455841 ↗
39. RGD-based strategies to target alpha(v) beta(3) integrin in cancer therapy and diagnosis10.1021/mp3002733 ↗
40. Two-photon photodynamic ablation of tumour cells using an RGD peptide-conjugated ruthenium(II) photosensitiser10.1039/D0CC04943C ↗
41. Red fluorescent ZnO nanoparticle grafted with polyglycerol and conjugated RGD peptide as drug delivery vehicles for efficient target cancer therapy10.1016/j.msec.2018.10.066 ↗
42. RGD functionalized chitosan nanoparticle mediated targeted delivery of raloxifene selectively suppresses angiogenesis and tumor growth in breast cancer10.1039/C9NR10673A ↗
43. Facile synthesis of processable semiaromatic polyamides containing thioether units10.1021/ie200192v ↗
44. Synthesis and characterization of rod-coil poly(amide-block-aramid) alternating block copolymers10.1021/ma052228i ↗
45. The synthesis and solubility of a wholly aromatic polyamide containing Para- and meta-substituted phenylene rings10.4028/www.scientific.net/AMM.320.488 ↗
46. PA6 and kevlar fiber reinforced isotactic polypropylene: structure, mechanical properties and crystallization and melting behavior10.1016/j.matdes.2011.10.039 ↗
47. 3D printed PEEK/HA composites for bone tissue engineering applications: effect of material formulation on mechanical performance and bioactive potential10.1016/j.jmbbm.2021.104601 ↗
48. Synthesis of high molecular weight poly(p-benzamide)s10.1021/acs.macromol.7b00515 ↗
49. Incorporation of a semi-aromatic nylon salt into polyamide 6 by solid-state or melt polymerization10.1016/j.polymer.2012.09.034 ↗
50. The effect of polymeric chain-like structure on the degradation and cellular biocompatibility of calcium polyphosphate10.1016/j.msec.2008.04.017 ↗
51. The interfacial pH of acidic degradable polymeric biomaterials and its effects on osteoblast behavior10.1038/s41598-017-06354-1 ↗
52. PEEK biomaterials in trauma, orthopedic, and spinal implants10.1016/j.biomaterials.2007.07.013 ↗
53. High-resolution morphometric analysis of human osteoblastic cell adhesion on clinically relevant orthopedic alloys10.1016/S8756-3282(99)00077-0 ↗
54. Influence of sulfur content on bone formation and antibacterial ability of sulfonated PEEK10.1016/j.biomaterials.2016.01.017 ↗
55. DNA damaging effects of sulfur dioxide derivatives in cells from various organs of mice10.1093/mutage/geh058 ↗
56. Dentin phosphophoryn- derived peptide promotes odontoblast differentiation in vitro and dentin regeneration in vivo10.3390/ma14040874 ↗
57. Effect of dentine phosphophoryn-derived RGD peptides on odontoblast- like cells10.1111/iej.12498 ↗
58. Functional analysis of bone sialoprotein: identification of the hydroxyapatite-nucleating and cell-binding domains by recombinant peptide expression and site-directed mutagenesis10.1016/S8756-3282(00)00392-6 ↗