Fabrication and properties of 2D EBGs by moulding/demoulding with high permittivity ceramics
Source abstract
Abstract
Two-dimensional electromagnetic bandgap structures (2D EBGs) are designed and fabricated by moulding/demoulding. A high permittivity and low dielectric loss microwave material, Bi2O3-ZnO-Nb2O5 (BZN) was used. The impacts of high permittivity on the 2D EBGs’ properties are investigated. As the experiments showed, wide electromagnetic band gap is found in the frequency ranges from 5.6 to 10.6 GHz, and 12.6 to 16.6 GHz. The first gap is greater than 60% of the gap center frequency, while the second gap is 25% of the center frequency. The interval between the two gaps is larger than 2 GHz, and the return loss of both gaps is as large as −40 dB. This interesting phenomenon of multi band gaps is very useful for diplexers, multi-mode tunable dielectric antennas and resonators. Based on these, expansive applications may be exploited in the future. The experimental results are in good agreement with the simulations’.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Photonic Crystals and Applications · Advanced Antenna and Metasurface Technologies · Metamaterials and Metasurfaces Applications
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (14)
Show source-provided references
1. E. Yablonovitch, Inhibited spontaneous emission in solid-state physics and electronics Phys. Rev. Lett. 58, 2059–2062 (1987)10.1103/PhysRevLett.58.2059 ↗
2. S. John, Strong localization of photons in certain disordered dielectric superlattices Phys. Rev. Lett. 58, 2486–2489 (1987)10.1103/PhysRevLett.58.2486 ↗
3. S. Noda, K. Tomoda, N. Yamamoto, A. Chutinan, Full three-dimensional photonic bandgap crystals at near-infrared wavelengths Science 289, 604–606 (2000)10.1126/science.289.5479.604 ↗
4. J.G. Fleming, S.Y. Lin, I. El-Kady, R. Biswas, K.M. Ho, All-metallic three-dimensional photonic crystals with a large infrared bandgap Nature 417, 52–55 (2002)10.1038/417052a ↗
5. A. Chelnokov, K. Wang, S. Rowson et al., Near-infrared Yablonovite-like photonic crystals by focused-ion-beam etching of macropourous silicon Appl. Phys. Lett. 77, 2943–2945 (2000)10.1063/1.1322630 ↗
6. A. Blanco et al., Large-scale synthesis of a silicon photonic crystal with a complete three-dimensional bandgap near 1.5 micrometres Nature, 405, 437–440 (2000)10.1038/35013024 ↗
7. Y.A. Vlasov, X.Z. Bo, J.C. Sturm, D.J. Norris, On-chip natural assembly of silicon photonic bandgap crystals Nature, 414, 289–293 (2001)10.1038/35104529 ↗
8. S. Shoji, S. Kawata, Photofabrication of three-dimensional photonic crystals by multibeam laser interference into a photopolymerization resin Appl. Phys. Lett. 76, 2668–2670 (2000)10.1063/1.126438 ↗
9. M. Campbell, D.N. Sharp, M.T. Harrison, R.G. Denning, A.J. Turberfield, Fabrication of photonic crystals for the visible spectrum by holographic lithography Nature, 404, 53–56 (2000)10.1038/35003523 ↗
10. T. Ovidiu, J. Sajeev, Proposed square spiral microfabrication architecture for large three-dimensional photonic band gap crystals Science 292, 1133–1135 (2001)10.1126/science.1059479 ↗
11. Y. Akahane, T. Asano et al., High-Q photonic nanocavity in a two-dimensional photonic crystal Nature 425, 944–947 (2003)10.1038/nature02063 ↗
12. P. de Maagt et al., Electromagnetic bandgap antennas and components for microwave and (sub)millimeter wave applications IEEE Trans. Antennas Propag. 51, 2667–2676 (2003)10.1109/TAP.2003.817566 ↗
13. W.H. Reeves, D.V. Skryabin, Transformation and control of ultra-short pulses in dispersion-engineered photonic crystal fibres Nature 424, 511–515 (2003)10.1038/nature01798 ↗
14. S. Noda, M. Yokoyama, M. Imada et al., Polarization mode control of two dimensional photonic crystal laser by unit cell structure design Science 293, 1123–1125 (2001)10.1126/science.1061738 ↗