Synthesis and properties of biodegradable hydrogels based on cross-linked natural rubber and cassava starch
Source abstract
Abstract
A series of interpenetrating polymer network (IPN) hydrogels based on cross-linked natural rubber (XNR) and cassava starch (CSt) as biodegradable membrane material were synthesized via free radical polymerization in latex state using N, N′-methylene bisacrylamide (MBA) and maleic acid as cross-linkers. The IPN XNR/CSt hydrogels were confirmed and characterized by infrared spectroscopy, thermal analysis, and X-ray diffraction. The results showed that with increasing MBA content from 1.0 to 2.5 phr, cross-link density and gel fraction of XNR increased from 0.80 to 0.90 mol M −3 and from 19.7% to 30.5%, respectively. The gel fraction and tensile strength of the IPN XNR/CSt hydrogels also gradually increased as a function of MBA content but the water swelling and elongation at break decreased slightly. The IPN XNR/CSt containing 1.0 phr MBA displayed the highest water swelling of 82%. The weight retentions of IPN XNR/CSt hydrogels after soil degradations for 90 days increased from 48% to 56% with increasing MBA from 1.0 phr to 2.5 phr. The IPN XNR/CSt exhibited not only a good biodegradation but also high mechanical strength and flexibility. Also, the IPN XNR/CSt could be a promising candidate as a biodegradable membrane for longer released fertilizer application.
Source: crossref · Quality: baseline
Research context
OpenAlex topics: Hydrogels: synthesis, properties, applications · biodegradable polymer synthesis and properties · Polymer-Based Agricultural Enhancements
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
Affiliations
Laboratory of Advanced Polymer and Rubber Materials (APRM), Department of Chemistry, Faculty of Science, Ubon Ratchathani University, Warin Chamrap, Thailand
Department of Chemistry and Center of Excellence for Innovation in Chemistry (PERCH-CIC), Faculty of Science, Ubon Ratchathani University, Warin Chamrap, Thailand
References (31)
Show source-provided references
1. 10.1016/j.reactfunctpolym.2013.12.00310.1016/j.reactfunctpolym.2013.12.003 ↗
2. 10.1016/j.cej.2014.01.06510.1016/j.cej.2014.01.065 ↗
3. 10.1016/j.biosystemseng.2008.09.02710.1016/j.biosystemseng.2008.09.027 ↗
4. 10.1201/978020348535410.1201/9780203485354 ↗
5. 10.1016/j.carbpol.2015.09.09510.1016/j.carbpol.2015.09.095 ↗
6. 10.1155/2014/58361210.1155/2014/583612 ↗
7. Sila-on W · Adv Mat Res · 2014 · 844 · 77
8. 10.1007/978-1-4471-4108-210.1007/978-1-4471-4108-2 ↗
9. 10.1016/j.colsurfb.2013.01.03010.1016/j.colsurfb.2013.01.030 ↗
10. 10.1002/pi.480810.1002/pi.4808 ↗
11. 10.1016/j.ijbiomac.2014.03.04110.1016/j.ijbiomac.2014.03.041 ↗
12. 10.1016/j.carbpol.2012.03.00410.1016/j.carbpol.2012.03.004 ↗
13. 10.1021/bm200083n10.1021/bm200083n ↗
14. 10.5923/j.ajps.20110101.0210.5923/j.ajps.20110101.02 ↗
15. 10.1080/00914037.2012.71914110.1080/00914037.2012.719141 ↗
16. Saijun D · Songklanakarin J Sci Technol · 2009 · 31 · 561
17. 10.1016/j.porgcoat.2012.12.01310.1016/j.porgcoat.2012.12.013 ↗
18. Zohuriaan-Mehr MJ · Iran Polym J · 2008 · 17 · 451
19. Larkin PJ · 2011
20. 10.1016/j.carbpol.2014.12.01210.1016/j.carbpol.2014.12.012 ↗
21. 10.1002/978111848079310.1002/9781118480793 ↗
22. 10.1016/j.polymer.2008.03.00510.1016/j.polymer.2008.03.005 ↗
23. 10.1016/j.snb.2008.04.04510.1016/j.snb.2008.04.045 ↗
24. 10.1016/j.cej.2009.05.04310.1016/j.cej.2009.05.043 ↗
25. 10.1107/S002188989900303910.1107/S0021889899003039 ↗
26. 10.1016/S0032-3861(01)00279-810.1016/S0032-3861(01)00279-8 ↗
27. 10.1016/j.biortech.2005.09.02410.1016/j.biortech.2005.09.024 ↗
28. Wang Z · E-Polymers · 2010 · 115 · 1
29. 10.1016/j.radphyschem.2009.06.00110.1016/j.radphyschem.2009.06.001 ↗
30. 10.1016/j.porgcoat.2010.03.01010.1016/j.porgcoat.2010.03.010 ↗
31. 10.1016/j.biortech.2007.06.05410.1016/j.biortech.2007.06.054 ↗