High density polyethylene hybrid nanocomposites reinforced with carbon nanofiber and nanoclay

The influence of carbon nano fiber (CNF) along with organically modified nanoclay (OMMT) on the final properties of high density polyethylene (HDPE) hybrid nanocomposites has been investigated. The hybridized nanocomposites were prepared in a twin screw extruder by melt mixing to achieve better dispersion. The effect of nano fillers on the mechanical, thermal, rheological, and morphological properties has been reported. The incorporation of OMMT along with CNF slightly improved the mechanical properties of the resultant hybrid nanocomposite due to the good adhesion between the filler and matrix. On the other hand, as shown in DSC results, increasing reinforcing filler quantity has no significant influence on the thermal properties such as melting and crystallization temperatures. Thermogravimetric analysis (TGA) results have shown that increasing filler content in the hybrid nanocomposite matrix has enhanced drastically the thermal stability of the neat HDPE. Similarly, the rheological behavior of the hybrid system showed significant increase in the viscosity due to the synergetic effect. A marginal increase in moduli and complex viscosity was observed in the hybrid system, while loss tangent was found to be decreased due to the increase in the stiffness. The morphological features of nanocomposites were characterized by scanning electron microscopy (SEM) and transmission electron microscopy (TEM). The nanoscale images showed the well dispersion of filler nanoparticles without any prominent aggregation, which further indicates the compatibilizing ability of nanofillers within the HDPE matrix.