Finite Torsion of Compressible Circular Cylinders: An Approximate Solution
Source abstract
Abstract
This paper deals with the equilibrium problem of circular cylinders under finite torsion. A three-dimensional kinematic model, where the large twisting of the cylinder is accompanied by transverse contraction and longitudinal extension, is formulated. Following a semi-inverse approach, the displacement field prescribed by the above kinematic model contains as unknowns the longitudinal displacement, the rigid rotation and the transverse stretch of cross sections. To simplify the mathematical formulation, the transverse stretch is assumed to be constant, as it radially undergoes very low variations. This hypothesis produces some approximations in the field equations, but the equilibrium solution obtained is however characterized by a satisfactory accuracy, as shown by the comparisons performed using the numerical techniques of the Finite Element Method (FEM). A Lagrangian analysis is performed and the compressible Mooney-Rivlin law is assumed for the stored energy function. Once evaluated the Piola-Kirchhoff stresses, the unknowns are determined by imposing the equilibrium conditions and the boundary conditions. For the end base of the cylinder two different boundary conditions have been considered, according to which the longitudinal translation of this surface is allowed or prevented. Once the kinematic unknowns have been determined, explicit formulae for displacements, stretches and stresses are provided, which show the role of the geometric and constitutive parameters, as well as of the twisting angle. The results provided by the proposed solution are shown by a series of graphs. The same torsion problem has been addressed with FEM. A very good agreement was found between the results obtained with the two different analyses. Finally, the nonlinear torsion problem was linearized by introducing the hypothesis of smallness of the displacement and deformation fields. With this linearization, the classical solution for the infinitesimal torsion problem was fully retrieved.
Source: expertdata · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Elasticity and Material Modeling · Elasticity and Wave Propagation · Composite Structure Analysis and Optimization
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (27)
Show source-provided references
1. Barré de Saint-Venant, A.J.C.: Mémoire sur la Torsion des Prismes. Mémoire de l’Acad. Savants étrangers, vol. 14, pp. 233–560 (1855)
2. Poynting, J.H.: The wave motion of a revolving shaft, and a suggestion as to the angular momentum in a beam of circularly polarised light. Proc. R. Soc. Lond. Ser. A 82, 560–567 (1909)10.1098/rspa.1909.0060 ↗
3. Poynting, J.H.: On the changes in the dimensions of a steel wire when twisted, and on the pressure of distortional waves in steel. Proc. R. Soc. Lond. Ser. A 86, 534–561 (1912)10.1098/rspa.1912.0045 ↗
4. Poynting, J.H.: The changes in length and volume of an Indian-rubber cord when twisted. India-Rubber J. 4, 6 (1913)
5. Seth, B.R.: Finite strain in elastic problems. Philos. Trans. R. Soc. Lond. Ser. A, Math. Phys. Sci. 234, 231–264 (1935)
6. Rivlin, R.S.: Large elastic deformations of isotropic materials. III. Some simple problems in cylindrical polar co-ordinates. Philos. Trans. R. Soc. A 240, 509–525 (1948)
7. Rivlin, R.S.: Large elastic deformation of isotropic materials. IV. Further developments of the general theory. Philos. Trans. R. Soc. A 241, 379–397 (1948)
8. Rivlin, R.S.: Large elastic deformation of isotropic materials. VI. Further results in the theory of torsion, shear and flexure. Philos. Trans. R. Soc. A 242, 173–195 (1949)
9. Kirkinis, E., Ogden, R.W.: On extension and torsion of a compressible elastic circular cylinder. Math. Mech. Solids 7, 373–392 (2002)10.1177/108128028476 ↗
10. Ciarletta, P., Destrade, M.: Torsion instability of soft solid cylinders. IMA J. Appl. Math. 79, 804–819 (2014)10.1093/imamat/hxt052 ↗
11. Valiollahi, A., Shojaeifard, M., Baghani, M.: Closed form solutions for large deformation of cylinders under combined extension-torsion. Int. J. Mech. Sci. 157–158, 336–347 (2019)10.1016/j.ijmecsci.2019.04.053 ↗
12. Green, A.E., Wilkes, E.W.: A note on the finite extension and torsion of a circular cylinder of compressible elastic isotropic material. Q. J. Mech. Appl. Math. 3, 240–249 (1953)10.1093/qjmam/6.2.240 ↗
13. Currie, P.K., Hayes, M.: On non-universal finite elastic deformations. In: Carlson, D.E., Shield, R.T. (eds.) Finite Elasticity. Proceedings of IUTAM Symposium, pp. 143–150. Martinus Nijhoff Publishers, Dordrecht (1981)
14. Polignone, D.A., Horgan, C.O.: Pure torsion of compressible nonlinearly elastic circular cylinders. Q. Appl. Math. 49, 591–607 (1991)10.1090/qam/1121689 ↗
15. Horgan, C.O., Polignone, D.A.: A note on pure torsion of a circular cylinder for a compressible nonlinearly elastic material with nonconvex strain energy. J. Elast. 37, 167–178 (1995)10.1007/BF00040944 ↗
16. Carroll, M.M., Horgan, C.O.: Finite strain solutions for a compressible elastic solid. Q. Appl. Math. 48, 767–780 (1990)10.1090/qam/1079919 ↗
17. Polignone, D.A., Horgan, C.O.: Axisymmetric finite anti-plane shear of compressible nonlinearly elastic circular tubes. Q. Appl. Math. 50, 323–341 (1992)10.1090/qam/1162279 ↗
18. Kanner, L.M., Horgan, C.O.: On extension and torsion of strain-stiffening rubber-like elastic circular cylinders. J. Elast. 93, 39–61 (2008)10.1007/s10659-008-9164-2 ↗
19. Anssari-Benam, A., Horgan, C.O.: Extension and torsion of rubber-like hollow and solid cylinders for incompressible isotropic hyperlastic materials with limiting chain extensibility. Eur. J. Mech. A, Solids 92, 104443 (2022)10.1016/j.euromechsol.2021.104443 ↗
20. Lanzoni, L., Tarantino, A.M.: Finite anticlastic bending of hyperelastic solids and beams. J. Elast. 131, 137–170 (2018)10.1007/s10659-017-9649-y ↗
21. Lanzoni, L., Tarantino, A.M.: The bending of beams in finite elasticity. J. Elast. 139, 91–121 (2020)10.1007/s10659-019-09746-8 ↗
22. Lanzoni, L., Tarantino, A.M.: Mechanics of high-flexible beams under live loads. J. Elast. 140, 95–125 (2020)10.1007/s10659-019-09759-3 ↗
23. Falope, F.O., Lanzoni, L., Tarantino, A.M.: The bending of fully nonlinear beams. Theoretical, numerical and experimental analyses. Int. J. Eng. Sci. 145, 103167 (2019)10.1016/j.ijengsci.2019.103167 ↗
24. Falope, F.O., Pelliciari, M., Lanzoni, L., Tarantino, A.M.: Snap-through and Eulerian buckling of the bi-stable von Mises truss in nonlinear elasticity: a theoretical, numerical and experimental investigation. Int. J. Non-Linear Mech. 134, 103739 (2021). https://doi.org/10.1016/j.ijnonlinmec.2021.10373910.1016/j.ijnonlinmec.2021.103739 ↗
25. Pelliciari, M., Tarantino, A.M.: Equilibrium paths for von Mises trusses in finite elasticity. J. Elast. 138, 145–168 (2020)10.1007/s10659-019-09731-1 ↗
26. Pelliciari, M., Tarantino, A.M.: Equilibrium and stability of anisotropic hyperelastic graphene membranes. J. Elast. 144, 169–195 (2021)10.1007/s10659-021-09837-5 ↗
27. Higham, N.J.: Functions of Matrices: Theory and Computation. SIAM, Philadelphia (2008). ISBN 978-0-898716-46-710.1137/1.9780898717778 ↗