Analysis of the Antiplane Problem with an Embedded Zero Thickness Layer Described by the Gurtin-Murdoch Model
Source abstract
Abstract
The antiplane problem of an infinite isotropic elastic medium subjected to a far-field load and containing a zero thickness layer of arbitrary shape described by the Gurtin-Murdoch model is considered. It is shown that, under the antiplane assumptions, the governing equations of the complete Gurtin-Murdoch model are inconsistent for non-zero surface tension. For the case of vanishing surface tension, the analytical integral representations for the elastic fields and the dimensionless parameter that governs the problem are introduced. The solution of the problem is reduced to the solution of the hypersingular integral equation written in terms of elastic stress of the layer. For the case of a layer along a straight segment, theoretical analysis of the hypersingular equation is performed and asymptotic behavior of the elastic fields near the tips is studied. The appropriate numerical solution techniques are discussed and several numerical results are presented. Additionally, it is demonstrated that the problem under study is closely related to the specific case of the well-known problem of a thin and stiff elastic inhomogeneity embedded into a homogeneous elastic medium.
Source: expertdata · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Numerical methods in engineering · Composite Material Mechanics · Advanced Mathematical Modeling in Engineering
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (77)
Show source-provided references
1. Gurtin, M.E., Murdoch, A.I.: A continuum theory of elastic material surfaces. Arch. Ration. Mech. Anal. 57(4), 291–323 (1975)10.1007/BF00261375 ↗
2. Gurtin, M.E., Murdoch, A.I.: Surface stress in solids. Int. J. Solids Struct. 14(6), 431–440 (1978)10.1016/0020-7683(78)90008-2 ↗
3. Miller, R.E.: Size-dependent elastic properties of nanosized structural elements. Nanotechnology 11(3), 139–147 (2000)10.1088/0957-4484/11/3/301 ↗
4. Sharma, P., Ganti, S., Bhate, N.: Effect of surfaces on the size-dependent elastic state of nano-inhomogeneities. Appl. Phys. Lett. 82(4), 535 (2003)10.1063/1.1539929 ↗
5. Duan, H.L., Wang, J., Huang, Z.P., Luo, Z.Y.: Stress concentration tensors of inhomogeneities with interface effects. Mech. Mater. 37(7), 723–736 (2005)10.1016/j.mechmat.2004.07.004 ↗
6. Duan, H.L., Wang, J., Huang, Z.P., Karihaloo, B.L.: Size-dependent effective elastic constants of solids containing nano-inhomogeneities with interface stress. J. Mech. Phys. Solids 53(7), 1574–1596 (2005)10.1016/j.jmps.2005.02.009 ↗
7. He, L.H., Li, Z.R.: Impact of surface stress on stress concentration. Int. J. Solids Struct. 43(20), 6208–6219 (2006)10.1016/j.ijsolstr.2005.05.041 ↗
8. Lim, C.W., Li, Z.R., He, L.H.: Size dependent, non-uniform elastic field inside a nano-scale spherical inclusion due to interface stress. Int. J. Solids Struct. 43(17), 5055–5065 (2006)10.1016/j.ijsolstr.2005.08.007 ↗
9. Mi, C., Kouris, D.: Nanoparticles under the influence of surface/interface elasticity. Mech. Mater. Struct. 1(4), 763–791 (2006)10.2140/jomms.2006.1.763 ↗
10. Mogilevskaya, S.G., Crouch, S.L., Stolarski, H.K.: Multiple interacting circular nano-inhomogeneities with surface/interface effects. J. Mech. Phys. Solids 56(6), 2298–2327 (2008)10.1016/j.jmps.2008.01.001 ↗
11. Ru, C.: Simple geometrical explanation of Gurtin-Murdoch model of surface elasticity with clarification of its related versions. Sci. China, Phys. Mech. Astron. 53(3), 536–544 (2010)10.1007/s11433-010-0144-8 ↗
12. Kushch, V.I., Mogilevskaya, S.G., Stolarski, H.K., Crouch, S.L.: Elastic interaction of spherical nanoinhomogeneities with Gurtin–Murdoch type interfaces. J. Mech. Phys. Solids 59(9), 1702–1716 (2011)10.1016/j.jmps.2011.06.004 ↗
13. Kushch, V.I., Mogilevskaya, S.G., Stolarski, H.K., Crouch, S.L.: Elastic fields and effective moduli of particulate nanocomposites with the Gurtin-Murdoch model of interfaces. Int. J. Solids Struct. 50(7–8), 1141–1153 (2013)10.1016/j.ijsolstr.2012.12.016 ↗
14. Kushch, V.I.: Stress field and effective elastic moduli of periodic spheroidal particle composite with Gurtin-Murdoch interface. Int. J. Eng. Sci. 132, 79–96 (2018)10.1016/j.ijengsci.2018.08.001 ↗
15. Xu, Z., Zheng, Q.: Micro-and nano-mechanics in China: a brief review of recent progress and perspectives. Sci. China, Phys. Mech. Astron. 61(7), 1–14 (2018)
16. Zhu, Y., Wei, Y., Guo, X.: Gurtin-Murdoch surface elasticity theory revisit: an orbital-free density functional theory perspective. J. Mech. Phys. Solids 109, 178–197 (2017)10.1016/j.jmps.2017.08.009 ↗
17. Luo, J., Wang, X.: On the anti-plane shear of an elliptic nano inhomogeneity. Eur. J. Mech. A, Solids 28(5), 926–934 (2009)10.1016/j.euromechsol.2009.04.001 ↗
18. Kushch, V.I., Chernobai, V.S., Mishuris, G.S.: Longitudinal shear of a composite with elliptic nanofibers: local stresses and effective stiffness. Int. J. Eng. Sci. 84, 79–94 (2014)10.1016/j.ijengsci.2014.06.013 ↗
19. Dai, M., Schiavone, P., Gao, C.: Prediction of the stress field and effective shear modulus of composites containing periodic inclusions incorporating interface effects in anti-plane shear. J. Elast. 125(2), 217–230 (2016)10.1007/s10659-016-9577-2 ↗
20. Steigmann, D.J., Ogden, R.W.: Plane deformations of elastic solids with intrinsic boundary elasticity. Proc. R. Soc. A 453, 853–877 (1997)10.1098/rspa.1997.0047 ↗
21. Eremeyev, V.A., Lebedev, L.P.: Mathematical study of boundary-value problems within the framework of Steigmann–Ogden model of surface elasticity. Contin. Mech. Thermodyn. 28, 407–422 (2016)10.1007/s00161-015-0439-0 ↗
22. Hamilton, J.C., Wolfer, W.G.: Theories of surface elasticity for nanoscale objects. Surf. Sci. 603, 1284–1291 (2009)10.1016/j.susc.2009.03.017 ↗
23. Koenig, S.P., Boddeti, N.G., Dunn, M.L., Bunch, J.S.: Ultrastrong adhesion of graphene membranes. Nat. Nanotechnol. 6, 543–546 (2011)10.1038/nnano.2011.123 ↗
24. Young, R.J., Liu, M., Kinloch, I.A., Li, S., Zhao, X., Vallés, C., Papageorgiou, D.G.: The mechanics of reinforcement of polymers by graphene nanoplatelets. Compos. Sci. Technol. 154, 110–116 (2018)10.1016/j.compscitech.2017.11.007 ↗
25. Manikas, A.C., Pastore Carbone, M.G., Woods, C.R., Wang, Y., Souli, I., Anagnostopoulos, G., Hadjinicolaou, M., Novoselov, K.S., Galiotis, C.: Stress transfer at the nanoscale on graphene ribbons of regular geometry. Nanoscale 11, 14354–14361 (2019)10.1039/C9NR03166A ↗
26. Wu, C.H., Wang, M.L.: Configurational equilibrium of circular-arc cracks with surface stress. Int. J. Solids Struct. 38(24–25), 4279–4292 (2001)10.1016/S0020-7683(00)00281-X ↗
27. Oh, E.-S., Walton, J.R., Slattery, J.C.: A theory of fracture based upon an extension of continuum mechanics to the nanoscale. J. Appl. Mech. 73, 792–798 (2006)10.1115/1.2166651 ↗
28. Kim, C.I., Schiavone, P., Ru, C.Q.: The effects of surface elasticity on an elastic solid with mode-III crack: complete solution. J. Appl. Mech. 77(2), 021011 (2010)
29. Walton, J.R.: A note on fracture models incorporating surface elasticity. J. Elast. 109(1), 95–102 (2012)10.1007/s10659-011-9369-7 ↗
30. Wang, X.: A mode III arc-shaped crack with surface elasticity. Z. Angew. Math. Phys. 66, 1987–2000 (2015)10.1007/s00033-014-0482-x ↗
31. Intarit, P., Senjuntichai, T., Rungamornrat, J., Rajapakse, R.K.N.D.: Penny-shaped crack in elastic medium with surface energy effects. Acta Mech. 228, 617–630 (2017)10.1007/s00707-016-1728-9 ↗
32. Zemlyanova, A.Y.: A straight mixed mode fracture with the Steigmann–Ogden boundary condition. Q. J. Mech. Appl. Math. 70(1), 65–86 (2017)10.1093/qjmam/hbw016 ↗
33. Leguillon, D., Sanchez-Palencia, E.: Computation of Singular Solutions in Elliptic Problems and Elasticity. Masson, Paris (1987)
34. Yosibash, Z.: Singularities in Elliptic Boundary Value Problems and Elasticity and Their Connection with Failure Initiation. Springer, New York (2012)10.1007/978-1-4614-1508-4 ↗
35. Mura, T.: Micromechanics of Defects in Solids. Martinus Nijhoff, Hague, Netherland (1987)10.1007/978-94-009-3489-4 ↗
36. Melan, E.: Ein Beitrag zur Theorie geschweisster Verbindungen. Ing.-Arch. 3(2), 123–129 (1932)10.1007/BF02079955 ↗
37. Reissner, E.: Note on the problem of the distribution of stress in a thin stiffened elastic sheet. Proc. Natl. Acad. Sci. USA 26, 300–305 (1940)10.1073/pnas.26.4.300 ↗
38. Pasternak, Y.M., Sulim, G.T.: Plane problem of elasticity for an anisotropic body with doubly periodic systems of thin inhomogeneities. Mech. Solids 49(2), 162–174 (2014)10.3103/S002565441402006X ↗
39. Erdogan, F., Gupta, G.D.: Stresses near a flat inclusion in bonded dissimilar materials. Int. J. Solids Struct. 8(4), 533–547 (1972)10.1016/0020-7683(72)90021-2 ↗
40. Caillerie, D., Nedelec, J.C.: The effect of a thin inclusion of high rigidity in an elastic body. Math. Methods Appl. Sci. 2(3), 251–270 (1980)10.1002/mma.1670020302 ↗
41. Sulim, G.T.: Antiplane problem for a system of linear inclusions in an isotropic medium. Appl. Math. Mech. 45(2), 223–230 (1981)10.1016/0021-8928(81)90039-3 ↗
42. Kanaun, S.K.: On singular models of a thin inclusion in a homogeneous elastic medium. J. Appl. Math. Mech. 48(1), 50–58 (1984)10.1016/0021-8928(84)90106-0 ↗
43. Li, Q., Ting, T.C.T.: Line inclusions in anisotropic elastic solids. J. Appl. Mech. 56(3), 556–563 (1989)10.1115/1.3176127 ↗
44. Vil’chevskaya, Y.N., Kanaun, S.K.: Integral equations for a thin inclusion in a homogeneous elastic medium. Appl. Math. Mech. 56(2), 235–243 (1992)10.1016/0021-8928(92)90078-M ↗
45. Bessoud, A., Krasucki, F., Serpilli, M.: Asymptotic analysis of shell-like inclusions with high rigidity. J. Elast. 103(2), 153–172 (2011)10.1007/s10659-010-9278-1 ↗
46. Vasil’ev, K.V., Sulym, H.T.: Elastic equilibrium of a space containing a thin curved elastic inclusion in longitudinal shear. J. Math. Sci. 212(1), 83–97 (2016)10.1007/s10958-015-2650-8 ↗
47. Koiter, W.T.: On the diffusion of load from a stiffener into a sheet. Q. J. Mech. Appl. Math. 8(2), 164–178 (1955)10.1093/qjmam/8.2.164 ↗
48. Muki, R., Sternberg, E.: Transfer of load from an edge-stiffener to a sheet—a reconsideration of Melan’s problem. J. Appl. Mech. 34(3), 679–686 (1967)10.1115/1.3607761 ↗
49. Erdogan, F., Gupta, G.D.: The problem of an elastic stiffener bonded to a half plane. J. Appl. Mech. 38, 937–941 (1971)10.1115/1.3408978 ↗
50. Mkhitaryan, S.M., Mkrtchyan, M.S., Kanetsyan, E.G.: On a method for solving Prandtl’s integro-differential equation applied to problems of continuum mechanics using polynomial approximations. Z. Angew. Math. Mech. 97(6), 639–654 (2017)10.1002/zamm.201600025 ↗
51. Delale, F., Erdogan, F.: The crack problem for a half plane stiffened by elastic cover plate. Int. J. Solids Struct. 18(5), 381–395 (1982)10.1016/0020-7683(82)90077-4 ↗
52. Wang, Z.Y., Zhang, H.T., Chou, Y.T.: Stress singularity at the tip of a rigid line inhomogeneity under antiplane shear loading. J. Appl. Mech. 53(2), 459–461 (1986)10.1115/1.3171782 ↗
53. Markenscoff, X., Ni, L., Dundurs, J.: The interface anticrack and Green’s functions for interacting anticracks and cracks/anticracks. J. Appl. Mech. 61(4), 797–802 (1994)10.1115/1.2901559 ↗
54. Dal Corso, F., Bigoni, D., Gei, M.: The stress concentration near a rigid line inclusion in a prestressed, elastic material. Part I. Full field solution and asymptotics. J. Mech. Phys. Solids 56(3), 815–838 (2008)10.1016/j.jmps.2007.07.002 ↗
55. Simonenko, I.B.: Electrostatic problems for non uniformal media. The case of a thin dielectric with a high dielectric constant. I and II. Differ. Equ. 10, 223–229 (1975), 11, 1398–1404 (1974)
56. Benveniste, Y., Miloh, T.: Imperfect soft and stiff interfaces in two-dimensional elasticity. Mech. Mater. 33(6), 309–323 (2001)10.1016/S0167-6636(01)00055-2 ↗
57. Zemlyanova, A.Y., Mogilevskaya, S.G.: Circular inhomogeneity with Steigmann–Ogden interface: local fields, neutrality, and Maxwell’s type approximation formula. Int. J. Solids Struct. 135, 85–98 (2018)10.1016/j.ijsolstr.2017.11.012 ↗
58. Muskhelishvili, N.: Singular Integral Equations: Boundary Problems of Function Theory and Their Application to Mathematical Physics, 2nd edn. Aeronautical Research Laboratories Translation, vol. 12. Dept. of Supply and Development, Melbourne (1949). Translated by J.R.M. Radok and W.G. Woolnough
59. Wang, J., Huang, Z., Duan, H., Yu, S., Feng, X., Wang, G., Zhang, W., Wang, T.: Surface stress effect in mechanics of nanostructured materials. Acta Mech. Solida Sin. 24(1), 52–82 (2011)10.1016/S0894-9166(11)60009-8 ↗
60. Martin, P.: End-point behaviour of solutions to hypersingular integral equations. Proc. R. Soc., Math. Phys. Sci. 432(1885), 301–320 (1991)
61. Martin, P.: Exact solution of a simple hypersingular integral equation. J. Integral Equ. Appl. 4(2), 197–204 (1992)10.1216/jiea/1181075681 ↗
62. Mandal, B.N., Chakrabarti, A.: Applied Singular Integral Equations. CRC Press and Science Publishers, Boca Raton (2011)
63. Linkov, A., Mogilevskaya, S.: On the theory of complex hypersingular equations. In: Atluri, S.N., Yagawa, G., Cruse, T. (eds.) Computational Mechanics ’95, pp. 2836–2840. Springer, Berlin, Heidelberg (1995)10.1007/978-3-642-79654-8_470 ↗
64. Linkov, A.M.: Boundary Integral Equations in Elasticity Theory. Kluwer Academic Publishers, Dordrecht (2002)10.1007/978-94-015-9914-6 ↗
65. Linkov, A.M., Mogilevskaya, S.G.: Complex hypersingular BEM in plane elasticity problems. In: Sladek, V., Sladek, J. (eds.) Singular Integrals in Boundary Element Method, pp. 299–364. Computational Mechanics Publication, Southampton (1998). Chapter 9
66. Aleksandrov, V.M., Mkhitaryan, S.M.: Contact Problems for Bodies with Thin Coatings and Interlayers. Nauka, Moscow (1983). In Russian
67. Goldstein, G.R.: Derivation and physical interpretation of general boundary conditions. Adv. Differ. Equ. 11(4), 457 (2006)
68. Nicaise, S., Li, H., Mazzucato, A.: Regularity and a priori error analysis of a Ventcel problem in polyhedral domains. Math. Methods Appl. Sci. 40, 1625–1636 (2017)10.1002/mma.4083 ↗
69. Bonnaillie-Noël, V., Dambrine, M., Hérau, F., Vial, G.: On generalized Ventcel’s type boundary conditions for Laplace operator in a bounded domain. SIAM J. Math. Anal. 42(2), 931–945 (2010)10.1137/090756521 ↗
70. Ventcel, A.D.: On boundary conditions for multi-dimensional diffusion processes. Theory Probab. Appl. 4(2), 164–177 (1959)10.1137/1104014 ↗
71. Costabel, M., Dauge, M.: Construction of corner singularities for Agmon-Douglis-Nirenberg elliptic systems. Math. Nachr. 162(1), 209–237 (1993)10.1002/mana.19931620117 ↗
72. Grisvard, P.: Elliptic Problems in Nonsmooth Domains. Pitman Advanced Pub. Program, Boston (1985)
73. Grisvard, P.: Singularities in Boundary Value Problems. Springer, Berlin (1992)
74. Kondrat’ev, V.A.: Boundary value problems for elliptic equations in domains with conical or angular points. Trans. Mosc. Math. Soc. 16, 227–313 (1967)
75. Golberg, M.A.: The convergence of several algorithms for solving integral equations with finite part integrals I. J. Integral Equ. 5, 329–340 (1983)
76. Kaya, A.C., Erdogan, F.: On the solution of integral equations with strongly singular kernels. Q. Appl. Math. XLV(1), 105–122 (1987)10.1090/qam/885173 ↗
77. Gradshteĭn, I.S., Ryzhik, I.M., Jeffrey, A., Zwillinger, D.: Table of Integrals, Series and Products, 7th edn. Academic Press, Oxford (2007)