On the Effect of the Volumetric Deformation in Soft Dielectric Composites with High Phase Contrast
Source abstract
Abstract
Abstract Towards the accurate modelling of soft dielectric composites, this investigation aims at demonstrating that the incompressibility constraint customarily adopted in the literature may lead to largely inaccurate predictions. This claim is grounded on the premise that, even though in these composites each phase may individually be assumed to be incompressible, the volumetric deformation of the softest phase can provide a significant contribution to the effective behaviour if the phase contrast is high enough. To reach our goal, we determine the actuation response of two-phase dielectric laminated composites (DLCs) where the softest phase admits volumetric deformation. Our results, discussed in the light of the limit case in which the softest phase consists of vacuum, on the one hand, challenge the hypotheses usually assumed in the modelling of soft dielectric composites and, on the other hand, are expected to provide useful information for the design of high-performance hierarchical DLCs.
Source: crossref · Quality: baseline
Research context
OpenAlex topics: Dielectric materials and actuators · Vibration Control and Rheological Fluids · Ferroelectric and Piezoelectric Materials
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (42)
Show source-provided references
1. Rivlin, R.S., Saunders, D.W.: Philos. Trans. R. Soc. Lond. A 243(865), 251 (1951). https://doi.org/10.1098/rsta.1951.000410.1098/rsta.1951.0004 ↗
2. Ogden, R.W.: Proc. R. Soc. A 326(1567), 565 (1972). https://doi.org/10.1098/rspa.1972.002610.1098/rspa.1972.0026 ↗
3. Ogden, R.W.: Non-linear Elastic Deformations. Ellis Harwood Ltd., Chichester (1984)
4. Boyce, M.C., Arruda, E.M.: Rubber Chem. Technol. 73(3), 504 (2000). https://doi.org/10.5254/1.354760210.5254/1.3547602 ↗
5. Tabor, D.: Polymer 35(13), 2759 (1994). https://doi.org/10.1016/0032-3861(94)90304-210.1016/0032-3861(94)90304-2 ↗
6. Toupin, R.A.: J. Ration. Mech. Anal. 5, 849 (1956). https://www.jstor.org/stable/24900192
7. Eringen, A.: Int. J. Eng. Sci. 1(1), 127 (1963). https://doi.org/10.1016/0020-7225(63)90028-410.1016/0020-7225(63)90028-4 ↗
8. Dorfmann, A., Ogden, R.W.: Acta Mech. 174, 167 (2005). https://doi.org/10.1007/s00707-004-0202-210.1007/s00707-004-0202-2 ↗
9. McMeeking, R.M., Landis, C.M.: J. Appl. Mech. 72(4), 581 (2005). https://doi.org/10.1115/1.194066110.1115/1.1940661 ↗
10. Fosdick, R., Tang, H.: J. Elast. 88(3), 255 (2007). https://doi.org/10.1007/s10659-007-9124-210.1007/s10659-007-9124-2 ↗
11. Suo, Z., Zhao, X., Greene, W.H.: J. Mech. Phys. Solids 56(2), 467 (2008). https://doi.org/10.1016/j.jmps.2007.05.02110.1016/j.jmps.2007.05.021 ↗
12. Lu, T., Ma, C., Wang, T.: Extreme Mech. Lett. 38, 100752 (2020). https://doi.org/10.1016/j.eml.2020.10075210.1016/j.eml.2020.100752 ↗
13. Huang, C., Zhang, Q.: Adv. Funct. Mater. 14(5), 501 (2004). https://doi.org/10.1002/adfm.20030502110.1002/adfm.200305021 ↗
14. Lu, T., Huang, J., Jordi, C., Kovacs, G., Huang, R., Clarke, D.R., Suo, Z.: Soft Matter 8, 6167 (2012). https://doi.org/10.1039/C2SM25692D10.1039/C2SM25692D ↗
15. deBotton, G., Tevet-Deree, L., Socolsky, E.: Mech. Adv. Mat. Struct. 14, 13 (2007). https://doi.org/10.1080/1537649060086437210.1080/15376490600864372 ↗
16. Bertoldi, K., Gei, M.: J. Mech. Phys. Solids 59(1), 18 (2011). https://doi.org/10.1016/j.jmps.2010.10.00110.1016/j.jmps.2010.10.001 ↗
17. Tian, L., Tevet-Deree, L., deBotton, G., Bhattacharya, K.: J. Mech. Phys. Solids 60(1), 181 (2012). https://doi.org/10.1016/j.jmps.2011.08.00510.1016/j.jmps.2011.08.005 ↗
18. Rudykh, S., Lewinstein, A., Uner, G., deBotton, G.: Appl. Phys. Lett. 102, 151905 (2013). https://doi.org/10.1063/1.480177510.1063/1.4801775 ↗
19. Lopez-Pamies, O.: J. Mech. Phys. Solids 64, 61 (2014). https://doi.org/10.1016/j.jmps.2013.10.01610.1016/j.jmps.2013.10.016 ↗
20. Siboni, M.N., Ponte Castañeda, P.: J. Mech. Phys. Solids 68, 211 (2014). https://doi.org/10.1016/j.jmps.2014.03.00810.1016/j.jmps.2014.03.008 ↗
21. deBotton, G.: J. Mech. Phys. Solids 53, 1334 (2005). https://doi.org/10.1016/j.jmps.2005.01.00610.1016/j.jmps.2005.01.006 ↗
22. Spinelli, S.A., Lopez-Pamies, O.: Int. J. Eng. Sci. 88, 15 (2015). https://doi.org/10.1016/j.ijengsci.2014.01.00510.1016/j.ijengsci.2014.01.005 ↗
23. Gei, M., Mutasa, K.C.K.: Int. J. Non-Linear Mech. 106, 266 (2018). https://doi.org/10.1016/j.ijnonlinmec.2018.06.00510.1016/j.ijnonlinmec.2018.06.005 ↗
24. Volpini, V., Bardella, L., Gei, M.: Meccanica 54(13), 1971 (2019). https://doi.org/10.3934/mine.202101410.3934/mine.2021014 ↗
25. Lefèvre, V.: J. Appl. Mech. 87(9), 091006 (2020). https://doi.org/10.1115/1.404728910.1115/1.4047289 ↗
26. Hong, W., Zhao, X., Suo, Z.: J. Mech. Phys. Solids 58, 558 (2010). https://doi.org/10.1016/j.jmps.2010.01.00510.1016/j.jmps.2010.01.005 ↗
27. Boldini, A., Bardella, L., Porfiri, M.: J. Elast. 141(2), 227 (2020). https://doi.org/10.1007/s10659-020-09779-410.1007/s10659-020-09779-4 ↗
28. Leronni, A., Bardella, L.: J. Mech. Phys. Solids 148, 104292 (2021). https://doi.org/10.1016/j.jmps.2021.10429210.1016/j.jmps.2021.104292 ↗
29. Gei, M., Springhetti, R., Bortot, E.: Smart Mater. Struct. 22, 104014 (2013). https://doi.org/10.1088/0964-1726/22/10/10401410.1088/0964-1726/22/10/104014 ↗
30. Spinelli, S.A., Lefèvre, V., Lopez-Pamies, O.: J. Mech. Phys. Solids 83, 263 (2015). https://doi.org/10.1016/j.jmps.2015.06.00910.1016/j.jmps.2015.06.009 ↗
31. Lefèvre, V., Lopez-Pamies, O.: J. Appl. Mech. 82(11), 111009 (2015). https://doi.org/10.1115/1.403118710.1115/1.4031187 ↗
32. Holzapfel, G.A.: Nonlinear Solid Mechanics. Wiley, New York (2000)
33. Saccomandi, G.: In: Saccomandi, G., Ogden, R.W. (eds.) Mechanics and Thermomechanics of Rubberlike Solids, CISM International Centre for Mechanical Sciences, vol. 452, pp. 91–134. Springer, Berlin (2004). https://doi.org/10.1007/978-3-7091-2540-310.1007/978-3-7091-2540-3 ↗
34. Wood, L.A., Martin, G.M.: J. Res. NBS A Phys. Ch. 68A(3), 259 (1964). https://doi.org/10.6028/jres.068A.02210.6028/jres.068A.022 ↗
35. Blatz, P.J., Ko, W.L.: Trans. Soc. Rheol. VI 223 (1962). https://doi.org/10.1122/1.54893710.1122/1.548937 ↗
36. Blatz, P.J.: In: Polymer Networks, Structure and Mechanical Properties, pp. 23–45. Plenum Press, New York (1971)
37. Rudykh, S., Bhattacharya, K., deBotton, G.: Proc. R. Soc. A 470(2162), 20130618 (2014). https://doi.org/10.1098/rspa.2013.061810.1098/rspa.2013.0618 ↗
38. Simo, J.C., Pister, K.S.: Comput. Methods Appl. Mech. Eng. 46(2), 201 (1984). https://doi.org/10.1016/0045-7825(84)90062-810.1016/0045-7825(84)90062-8 ↗
39. Beatty, M.F.: J. Elast. 70(1–3), 65 (2003). https://doi.org/10.1023/B:ELAS.0000005553.38563.9110.1023/B:ELAS.0000005553.38563.91 ↗
40. Carroll, M.M.: J. Elast. 103(2), 173 (2011). https://doi.org/10.1007/s10659-010-9279-010.1007/s10659-010-9279-0 ↗
41. Ghosh, K., Lopez-Pamies, O.: Meccanica 56, 1505 (2021). https://doi.org/10.1007/s11012-020-01179-110.1007/s11012-020-01179-1 ↗
42. Lopez-Pamies, O., Idiart, M.I., Li, Z.: J. Eng. Mater. Technol. ASME 133(1), 011007 (2011). https://doi.org/10.1115/1.400264210.1115/1.4002642 ↗