Co-bonding of carbon fibre-reinforced epoxy and galvanised steel with laser structured interface for automotive applications
Source abstract
Abstract
Materially bonded hybrid systems with precisely adjusted interfacial properties are of great scientific and industrial interest with regard to lightweight construction. In the present study, a material composite of carbon fiber reinforced plastic (CFRP) and galvanized steel is considered, where the metallic surface is laser structured in order to improve the adhesion properties. The resulting joining properties will be elicited by tensile shear tests in comparison to an alkaline cleaned surface condition and blind riveting. The potential of direct-joined hybrid systems with laser-structured substrate surfaces will also be considered using an automotive roof frame as an example. In the tensile shear test, the direct-joined hybrid joint with laser-structured metal substrate achieves significantly higher joint strengths than after alkaline cleaning. Compared to an aluminum/steel reference structure, the CFRP/steel roof frame exhibits a significant weight advantage with superior mechanical properties under flexural and compressive loading.
Source: openalex_inverted_index · Quality: baseline
Research context
OpenAlex topics: Corrosion Behavior and Inhibition · Mechanical Behavior of Composites · Concrete Corrosion and Durability
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
Affiliations
Paderborn University, Faculty of Mechanical Engineering, Department of Materials Science (LWK), Warburger Straße 100, 33098 Paderborn, Germany
Paderborn University, Faculty of Mechanical Engineering, Automotive Lightweight Design (Lia), Warburger Straße 100, 33098 Paderborn, Germany
Paderborn University, Faculty of Science, Department of Chemistry, Technical and Macromolecular Chemistry (TMC), Warburger Straße 100, 33098 Paderborn, Germany
Funding
funding
References (34)
Show source-provided references
1. Smith B, Spulber A, Modi S, et al. Technology Roadmaps: intelligent Mobility Technology, Materials and Manufacturing Processes, and Light Duty Vehicle Propulsion. Ann Arbor MI: Center for Automotive Research; 2017.
2. 10.1007/978-3-662-58206-0_110.1007/978-3-662-58206-0_1 ↗
3. Jäschke A, Dajek U, editors. Dachrahmen in Hybridbauweise. Sonderdruck aus VDI-Tagungsband Nr. 4260. Düsseldorf. VDI Verlag. 2004. 25–45.
4. Frei P. The hybrid B-Pillar in the new BMW 7-Series. An Example for the Manufacturing Implementation of an innovative Steel-CRFP Lightweight Design Concept. In: Presentation at Materials in Car Body Engineering Conference, Automotive Circle, Bad Nauheim, 2016.
5. 10.1007/978-3-658-14144-8_910.1007/978-3-658-14144-8_9 ↗
6. 10.1016/j.compstruct.2019.11153310.1016/j.compstruct.2019.111533 ↗
7. 10.1504/IJAUTOC.2014.06412710.1504/IJAUTOC.2014.064127 ↗
8. Galińska A, Galiński C. Mechanical Joining of Fibre Reinforced Polymer Composites to Metals - A Review. Part II: riveting, Clinching, Non-Adhesive Form-Locked Joints. Pin Loop Joining Polymers. 2020;12(8):1681.
9. 10.1016/j.compstruct.2019.01.09210.1016/j.compstruct.2019.01.092 ↗
10. 10.1177/095440702096575910.1177/0954407020965759 ↗
11. 10.1007/978-3-662-58206-0_1510.1007/978-3-662-58206-0_15 ↗
12. 10.1016/j.apsusc.2005.07.05210.1016/j.apsusc.2005.07.052 ↗
13. 10.1002/ppap.20073030310.1002/ppap.200730303 ↗
14. 10.1016/j.ijadhadh.2010.05.00910.1016/j.ijadhadh.2010.05.009 ↗
15. Büchter E. Cleaning with light. Laser Technik J. 2018;15(2):36–39.
16. 10.1016/j.optlastec.2020.10618810.1016/j.optlastec.2020.106188 ↗
17. 10.1163/016942410X53338110.1163/016942410X533381 ↗
18. 10.1016/j.ijadhadh.2015.08.00910.1016/j.ijadhadh.2015.08.009 ↗
19. 10.1016/j.compositesb.2018.05.03010.1016/j.compositesb.2018.05.030 ↗
20. 10.1016/j.ijadhadh.2013.05.00410.1016/j.ijadhadh.2013.05.004 ↗
21. 10.1504/IJAUTOC.2016.08432310.1504/IJAUTOC.2016.084323 ↗
22. 10.1080/00218464.2014.93380910.1080/00218464.2014.933809 ↗
23. 10.1016/j.ijadhadh.2006.05.00410.1016/j.ijadhadh.2006.05.004 ↗
24. 10.1007/s11740-020-01006-210.1007/s11740-020-01006-2 ↗
25. 10.1016/j.jmapro.2019.09.04610.1016/j.jmapro.2019.09.046 ↗
26. 10.1080/09243046.2015.105213010.1080/09243046.2015.1052130 ↗
27. Tröster T, Camberg AA, Wingenbach N, et al. A New Numerical Method for Potential Analysis and Design of Hybrid Components from Full Vehicle Simulations: implementation and Component Design. In: Dröder K, Vietor Teditors. Technologies for economical and functional lightweight design. Berlin: Springer Vieweg; 2020. p. 353–365.
28. 10.1016/j.ijadhadh.2021.10281210.1016/j.ijadhadh.2021.102812 ↗
29. 10.1016/j.matchemphys.2008.02.02910.1016/j.matchemphys.2008.02.029 ↗
30. 10.1016/S0079-6425(98)00006-110.1016/S0079-6425(98)00006-1 ↗
31. 10.1002/(SICI)1096-9918(199711)25:12<924::AID-SIA317>3.0.CO;2-210.1002/(SICI)1096-9918(199711)25:12<924::AID-SIA317>3.0.CO;2-2 ↗
32. Koll S, Bretschneider M, Klinkenberg T, et al. Optimizing the surface of galvanized sheet steel by an improved temper rolling process. Stahl und Eisen. 2016;10:53–57.
33. 10.1016/j.ijadhadh.2010.05.00410.1016/j.ijadhadh.2010.05.004 ↗
34. 10.1016/j.ijadhadh.2010.07.00510.1016/j.ijadhadh.2010.07.005 ↗