Comparison of the size and morphology of UHMWPE wear debris produced by a hip joint simulator under serum and water lubricated conditions
Bibliographic record
Abstract
No abstract is available for this record. The assistant can identify its topic from the title, but cannot infer the study’s results.
Source: Not provided · Quality: missing
Research context
OpenAlex topics: Orthopaedic implants and arthroplasty · Total Knee Arthroplasty Outcomes · Orthopedic Infections and Treatments
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (18)
Show source-provided references
1. Comparative study of the wear of UHMWPE with zirconia ceramic and stainless steel femoral heads in artificial hip joints10.1016/1350-4533(94)90042-6 ↗
2. The effect of transfer film and surface roughness on the wear of lubricated ultra-high-molecular-weight polyethylene10.1016/0267-6605(93)90016-Z ↗
3. Low wear rate of UHMWPE against zirconia ceramic (Y-PSZ) in comparison to alumina ceramic and SUS 316L alloy10.1002/jbm.820250703 ↗
4. Wear of artificial joint materials II twelve-channel wear-screening device: correlation of experimental and clinical results10.1243/EMED_JOUR_1981_010_037_02 ↗
5. The origin of submicron polyethylene wear debris in total hip arthroplasty
6. Isolation of predominantly submicron-sized UHMWPE wear particles from periprosthetic tissues10.1002/jbm.820290118 ↗
7. Wear of polyethylene acetabular cups against zirconia femoral heads studied with a hip joint simulator10.1016/0043-1648(94)90148-1 ↗
8. Wear of polyethylene acetabular cups against alumina femoral heads10.3109/17453679308993680 ↗
9. A method for the quantitative recovery of polyethylene wear debris from the simulated service of total joint prostheses10.1016/0043-1648(78)90056-X ↗
10. A hip wear simulator for the evaluation of biomaterials in hi-arthroplasty components
11. Degradation and wear of ultra-high molecular weight polyethylene
12. Forces transmitted by joints in the human body
13. Mechanism and clinical significance of wear debris-induced osteolysis10.1097/00003086-199203000-00003 ↗
14. The mechanism of loosening of cemented acetabular components in total hip arthroplasty: analysis of specimens retrieved at autopsy
15. Wear of polyethylene cups in THR: Analysis of 159 cups retrieved at revision surgery or autopsy
16. Chemical and morphological characterization of wear debris in failed uncemented total hip replacement
17. Rabinowicz · 1965
18. Wear mechanisms for ultrahigh molecular weight polyethylene in the total hip prosthesis10.1002/app.1979.070230313 ↗