Design Guidelines of FRP Reinforced Concrete Building Structures
Source abstract
Abstract
The “Design Guidelines of FRP Reinforced Concrete Building Structures” was established in 1993 as one of the final outputs of the research committee on fiber-reinforced plastic (FRP) reinforced concrete building structures organized under the Japanese Ministry of Construction's research and development project titled: “Effective Use of Advanced Construction Materials (1988–92).” These Guidelines are a translation of the Japanese guidelines. They describe the design concept for nonprestressed concrete structures reinforced with FRP rebars, and the calculation equations are all relegated to the commentaries due to lack of design data on FRP reinforced concrete structures. A limit-state design method has been adopted under the guidelines. Among the subjects covered are overview, design method, materials, loads and combination, stress and deformation, ultimate state design, serviceability state design, structural requirement, and testing methods for the tensile strength and bond strength of materials. “The Design Guidelines for FRP Prestressed Concrete Members” is separate from these guidelines.
Source: openalex_inverted_index · Quality: baseline
Research context
OpenAlex topics: Structural Behavior of Reinforced Concrete · Concrete Corrosion and Durability · Structural Load-Bearing Analysis
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
Affiliations
Prof., Facu. of Engrg., Ashikaga Univ., 268-1 Ohmae-cho, Ashikaga, Tochigi 326, Japan.
Sr. Res., Int. Inst. of Seismology and Earthquake Engrg., Build. Res. Inst., Japanese Ministry of Constr., 1 Tatehara, Tsukuba, Ibaraki 305, Japan.
General Mgr., Nuclear Power Dept., Mitsui Construction Corp., Inc., 1-9-1 Nakase, Mihama-ku, Chiba 261, Japan.
General Mgr., Tokyo Kenchiku Structural Engineers, Inc., 20 Shinano-machi, Shinjyuku-ku, Tokyo 160, Japan.
Sr. Res., Struct. Engrg. Dept., Tech. Res. Inst., Obayashi Corporation, Inc., 4-640 Shimokiyoto, Kiyose, Tokyo 204, Japan.
Prof., Facu. of Engrg., Fukui Univ., 3-9-1 Bunkyo, Fukui 910, Japan.
Prof., Facu. of Engrg., Utsunomiya Univ., 2753 Ishii-machi, Utsunomiya, Tochigi 321, Japan.
Prof., Facu. of Engrg., Sci. Univ. of Tokyo, 1-3 Kagurazaka, Shinjyuku-ku, Tokyo 162, Japan.
Prof., Facu. of Engrg., Musashi Inst. of Technol., 1-28-1 Tamatsutsumi, Setagaya-ku, Tokyo 158, Japan.
Prof., Facu. of Engrg., Tokai Univ., 1117 Kitakaname, Hiratsuka, Kanagawa 259-12, Japan.
Sr. Res., Mat. Dept., Build. Res. Inst., Japanese Ministry of Constr., 1 Tatehara, Tsukuba, Ibaraki 305, Japan.
Sr. Res., Tech. Res. Inst., Mitsui Construction Corp., Inc., 518-1 Komaki, Nagareyama, Chiba 270-01, Japan.
Head, Struct. Engrg. Dept., Build. Res. Inst., Japanese Ministry of Constr., 1 Tatehara, Tsukuba, Ibaraki 305, Japan.
References (47)
Show source-provided references
1. Application of continuous fiber reinforcement materials to concrete structures . (1992). Concrete library No. 72 Japan Soc. of Civ. Engrs. (JSCE) Tokyo Japan (in Japanese).
2. Architectural Institute of Japan (AIJ). (1986). “Recommendations for design and construction of partially prestressed concrete (class III of prestressed concrete) structures.” Rep. Tokyo Japan (in Japanese).
3. Architectural Institute of Japan (AIJ). (1991). `Evaluation items and evaluation methods for new reinforcement materials and new reinforced concrete.” Rep. Task Committee on Continuous Fiber Compos. Mat. 5-26-20 Shiba Minato-ku Tokyo Japan (in Japanese).
4. AIJ structural design guidelines for reinforced concrete buildings. (1994). Arch. Inst. of Japan (AIJ) Tokyo Japan (in English).
5. Building code requirements for reinforced concrete (ACI 318-95) . (1995). Am. Concrete Inst. (ACI) Detroit Mich.
6. Design guidelines for earthquake resistant reinforced concrete buildings based on ultimate strength concept. (1990). Architectural Inst. of Japan (AIJ) Tokyo Japan (in Japanese).
7. Endo K. Ishibashi K. Okamoto T. and Tanigaki M. (1989). “Shear behavior of concrete beams reinforced with braided high strength fiber rods in spiral shape.” Proc. Japan Concrete Inst. (JCI) Tokyo Japan 1(1) 807–812 (in Japanese).
8. Endo K. Ishibashi K. Okamoto T. Tanigaki M. and Hirata Y. (1990). “Shear behavior of concrete beams reinforced with braided high strength fiber rods in spiral shape (Part 3 calculation of shear strength).” Proc. Struct. II Arch. Inst. of Japan (AIJ) Tokyo Japan 977–978 (in Japanese).
9. Fukuyama H. Matsuzaki Y. and Nakano K. (1993). “Study on crack width of FRP reinforced concrete members.” Proc. Japan Concrete Inst. (JCI) Tokyo Japan 15(2) 905–910 (in Japanese).
10. Fukuyama H. Matsuzaki Y. and Nakano K. (1993). “Study on crack width of FRP reinforced concrete members.” Proc. Japan Concrete Inst. (JCI) Tokyo Japan 15(2) 905–910 (in Japanese).
11. Fukuyama H. Matsuzaki Y. and Nakano K. (1994). “Evaluation method on stiffness of cracked FRP reinforced concrete members.”' Proc. Struct. II Arch. Inst. of Japan (AIJ) Tokyo Japan 617–618 (in Japanese).
12. Fukuyama H. Masuda Y. Sonobe Y. and Tanigaki M. (1995). “Structural performances of concrete frame reinforced with FRP reinforcement.” Proc. 2nd Int. RILEM Symp. on Non-metallic (FRP) Reinforcement for Concrete Struct. (FRPRCS-2) RILEM 29 L. Taerwe ed. E & FN Spon London U.K. 275–286.
13. Furukawa S. Tsuji Y. Otani S. and Kojima A. (1989). “Flexural and shear behaviors of concrete beams reinforced with CFRC rods.” Proc. Japan Concrete Inst. (JCI) Tokyo Japan 11(1) 849–854 (in Japanese).
14. Hayashi H. (1992). “A study on the application of new materials to building structures ” MSc dissertation Fukui Univ. Fukui Japan (in Japanese).
15. Hirata Y. Okamoto T. Endo K. and Tanigaki M. (1990). “Shear behavior of concrete beams reinforced with braided high strength fiber rods as shear reinforcement.” Proc. Japan Concrete Inst. (JCI) Tokyo Japan 12(1) 1129–1134 (in Japanese).
16. Hironaka T. Tsuji S. Shiraishi F. and Hamada H. (1992). “Shear behavior of spiral deformed FRP rods as web reinforcements in concrete beams.” Proc. Japan Concrete Inst. (JCI) Tokyo Japan 14(2) 717–722 (in Japanese).
17. Homma M. and Maruyama T. (1989). “Study on shear strength of various fiber reinforced plastic rods.” Proc. Japan Concrete Inst. (JCI) Tokyo Japan 11(1) 783–788 (in Japanese).
18. Homma M. and Maruyama T. (1990). “Experimental study on shear capacity of concrete beams with CFRP main reinforcements and stirrups.” Proc. Struct. II Arch. Inst. of Japan (AIJ) Tokyo Japan 981–982 (in Japanese).
19. Hosoi R. Mutsuyoshi H. Taniguchi H. and Kita T. (1992). “Compressive properties of concrete members reinforced with FRP as transverse reinforcement.” Proc. Japan Concrete Inst. (JCI) Tokyo Japan 14(2) 637–642 (in Japanese).
20. Japanese architectural standard specification 5 (JASS5). (1993). Arch. Inst. of Japan (AIJ) Tokyo Japan.
21. Kamei T. and Nagasaka T. (1992). “Studies on shear behavior of concrete beams reinforced with FRP rods (part 3: shear capacity determined by shear compression failure).” Proc. Struct. II Arch. Inst. of Japan (AIJ) Tokyo Japan 145–146 (in Japanese).
22. Bond performance of concrete members reinforced with FRP bars.
23. Kawai K. Matsuzaki Y. and Nakano K. (1991). “Experimental study on flexural behavior of concrete beams reinforced with continuous-fiber.” Proc. Japan Concrete Inst. (JCI) Tokyo Japan 13(2) 807–810 (in Japanese).
24. Kimura K. and Kobatake K. (1990). “Research and development on structural members using new and advanced materials (part 3: behavior of carbon FRP rods reinforced concrete beams subject to vertical load).” Proc. Struct. II Arch. Inst. of Japan (AIJ) Tokyo Japan 975–976 (in Japanese).
25. Kimura K. Kobatake Y. and Okano Y. (1990). “Shear tests on carbon and aramid fiber reinforced concrete beams.” Proc. Japan Concrete Inst. (JCI) Tokyo Japan 12(1) 1135–1140 (in Japanese).
26. Kobayashi T. Maruyama K. Shimizu K. and Kanekura S. (1992). “Shear behavior of concrete beam reinforced by CFRP rods.” Proc. Japan Concrete Inst. (JCI) Tokyo Japan 14(2) 701–706 (in Japanese).
27. Kondo S. and Nagasaka T. (1991). “Effectiveness of FRP rods as web reinforcement in concrete beams.” Proc. Japan Concrete Inst. (JCI) Tokyo Japan 13(2) 811–816 (in Japanese).
28. Kubota T. and Murakami M. (1991). “Experimental study on stress-strain relationship of confined concrete reinforced by FRP bars.” Proc. Japan Concrete Inst. (JCI) Tokyo Japan 13(2) 843–848 (in Japanese).
29. Maruyama T. Homma M. and Okamura H. (1990). “Experimental study on the tensile strength at the bending part of fiber reinforced plastic rods.” Proc. Japan Concrete Inst. (JCI) Tokyo Japan 12(1) 1025–1030 (in Japanese).
30. Matsuzaki Y. Nakano K. Nakazawa H. and Fujisaki T. (1988). “Application of new fiber reinforced composite materials (NFM) to concrete structures (part 7: shear tests on beams reinforced with NFM).” Proc. Struct. II Arch. Inst. of Japan (AIJ) Tokyo Japan 817–818 (in Japanese).
31. Mikami H. Kato M. Takeuchi H. and Tamura T. (1989). “Flexural and shear behaviors of RC beams reinforced with braided FRP rods in spiral shape.” Proc. Japan Concrete Inst. (JCI) Tokyo Japan 11(1) 813–818 (in Japanese).
32. Miyata S. Tottori S. Terada T. and Sekijima K. (1989). “Experimental study on tensile strength of FRP bent bar.” Proc. Japan Concrete Inst. (JCI) Tokyo Japan 11(1) 789–794 (in Japanese).
33. Nagasaka T. Fukuyama H. and Tanigaki M. (1993). “Shear performance of concrete beams reinforced with FRP stirrups.” Proc. Int. Symp. on Fiber Reinforced-Plastic Reinforcement for Concrete Struct. ACI-SP 138 Am. Concrete Inst. Detroit Mich. 789–811.
34. Nakano K. Matsuzaki Y. Tada Y. and Fujisaki T. (1990). “Application of new fiber reinforced composite materials (NFM) to concrete structures (part 12: shear tests on beams using NFM for shear reinforcement).” Proc. Struct. II Arch. Inst. of Japan (AIJ) Tokyo Japan 963–964 (in Japanese).
35. Nakano K. Matsuzaki Y. and Kawai K. (1992). “Flexural performance of concrete beams reinforced and prestressed with continuous fiber bars.” Proc. Struct. II Arch. Inst. of Japan (AIJ) Tokyo Japan 147–148 (in Japanese).
36. Nakano K. Matsuzaki Y. Fukuyama H. and Teshigawara M. (1993). “Flexural performance of concrete beams reinforced with continuous fiber bars.” Proc. Int. Symp. on Fiber Reinforced-Plastic Reinforcement for Concrete Struct. ACI-SP 138 Am. Concrete Inst. Detroit Mich. 743–766.
37. Saito H. Tsuji Y. Sekijima K. and Ogawa H. (1988). “Flexural and shear behaviors of concrete beams reinforced with FRP.” Proc. Japan Concrete Inst. (JCI) Tokyo Japan 10(3) 547–552 (in Japanese).
38. Sonobe Y. Fujisawa M. Fukuyama H. Kanakubo T. and Yonemaru K. (1992). “Flexural performance of concrete beams reinforced with FRP bars under antisymmetric cyclic loading.” Proc. Struct. II Arch. Inst. of Japan (AIJ) Tokyo Japan 141–142 (in Japanese).
39. Sonobe Y. Mochizuki S. Matsuzaki Y. Shimizu A. Masuda Y. and Fukuyama H. (1995). “Guideline for structural design of FRP reinforced concrete building structures in Japan.” Proc. 2nd Int. RILEM Symp. on Non-metallic (FRP) Reinforcement for Concrete Struct. (FRPRCS-2) RILEM 29 L. Taerwe ed. E & FN Spon London U.K. 636–645.
40. Standard specifications for concrete (design). (1986). Japan Soc. of Civ. Engrs. (JSCE) Tokyo Japan (in Japanese).
41. Standard for structural calculation of reinforced concrete structures . (1988). Arch. Inst. of Japan (AIJ) Tokyo Japan (in Japanese).
42. Tezuka M. Kondo S. and Okazaki M. (1990). “Shear strength test of concrete beams reinforced by vinylon stirrups.” Proc. Japan Concrete Inst. (JCI) Tokyo Japan 12(1) 1123–1128 (in Japanese).
43. Tottori S. Terada T. Wakui H. and Miyata S. (1988). “Study on behavior of shear failure of concrete beams reinforced with FRP bars.” Proc. Japan Concrete Inst. (JCI) Tokyo Japan 10(3) 541–546 (in Japanese).
44. Wakui H. and Tottori S. (1990). “Reinforcing effect of spiral FRP rods as shear reinforcement.” Proc. Japan Concrete Inst. (JCI) Tokyo Japan 12(1) 1141–1146 (in Japanese).
45. Wakui H. Tottori S. Terada T. and Hara C. (1989). “Shear resisting behavior of PC beams using FRP as tendons and spiral hoops.” Proc. Japan Concrete Inst. (JCI) Tokyo Japan 11(1) 835–838 (in Japanese).
46. Watanabe K. Ishibashi K. Sonobe Y. and Okamoto T. (1991). “Centrally loaded compression tests of concrete column reinforced with braided aramid fiber rods.” Proc. Japan Concrete Inst. (JCI) Tokyo Japan 13(2) 801–806 (in Japanese).
47. Yonemaru K. Sonobe Y. Fujisawa M. Honda T. and Kanakubo T. (1991). “Bond performance of concrete members reinforced with FRP bars (part 5).” Proc. Struct. II Arch. Inst. of Japan (AIJ) Tokyo Japan 845–846 (in Japanese).