Bond between Carbon Fiber Reinforced Polymer Bars and Concrete. II: Computational Modeling
Source abstract
Abstract
Computational modeling of the behavior of concrete reinforced with fiber reinforced polymer (FRP) bars requires models for the constitutive behavior of concrete and FRP and a model for their interaction, bond. This study focuses upon the application of an elastoplastic bond model to represent the behavior of the type A bar experimentally examined in Part I. By fully coupling the tangent and radial response, the model is sensitive to the stress state around the bar and can induce longitudinal cracking in the adjacent concrete. The model is calibrated and then applied to predict the splitting behavior of two types of specimens. Though the two specimens differ significantly, the estimated splitting loads fall within the experimental scatter. The model is then used to obtain preliminary design data for the needed cover thickness, development length, and transfer lengths. Computational models, when calibrated with limited experimental data, allow the behavior of several different specimens to be estimated. This approach is an effective means of obtaining preliminary design data and of planning further experimental verification.
Source: openalex_inverted_index · Quality: baseline
Research context
OpenAlex topics: Structural Behavior of Reinforced Concrete · Innovative concrete reinforcement materials · Concrete Corrosion and Durability
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
Affiliations
Visiting Researcher, Impact Physics Branch, Army Research Laboratory, APG, MD 21005.
Graduate Student, Civil Engineering Dept., Univ. of Illinois, Urbana-Champaign, IL 61801.
References (34)
Show source-provided references
1. 10.1016/S0266-3538(98)00016-510.1016/S0266-3538(98)00016-5 ↗
2. Boothby T. E. Nanni A. Bakis C. and Huang H. (1995). “Bond of FRP rods embedded in concrete.” Proc. 10th ASCE Engineering Mechanics Specialty Conf. ASCE New York 114–117.
3. CEB. (1993). CEB-FIP Model Code 90 Thomas Telford Services Ltd. London U.K.
4. Ciampi V. Eligehausen R. Bertero V. V. and Popov E. P. (1981). “Analytical model for deformed bar bond under generalized excitations.” Transactions of IABSE Colloquium on Advanced Mechanics of Reinforced Concrete Delft The Netherlands.
5. Cornelissen H. A. W. Hordijk D. A. and Reinhardt H. W. (1986). “Experiments and theory for the application of fracture mechanics to normal and lightweight concrete.” Fracture toughness and fracture energy of concrete Elsevier New York 565–575.
6. Cosenza E. Manfredi G. and Realfonzo R. (1995). “Analytical modeling of bond between FRP reinforcing bars and concrete.” Non-metallic (FRP) reinforcement for concrete structures FRPRCS-2 L. Taerwe ed. University of Ghent Belgium 164–171.
7. 10.1061/(ASCE)1090-0268(1997)1:2(40)10.1061/(ASCE)1090-0268(1997)1:2(40) ↗
8. Cox J. V. (1996). “Elastic moduli of a bond model for reinforced concrete.” Proc. 11th ASCE Engineering Mechanics Specialty Conf. Ft. Lauderdale Fla. May 84–87.
9. Cox J. V. (1999). “Computational models for the bond between FRP reinforcing bars and concrete.” American Society for Composites’ 14th Annual Technical Conf. Dayton Ohio September 618–627.
10. Cox J. V. and Guo J. (1999). “Modeling the stress state dependency of the bond behavior of FRP tendons.” Proc. 4th Int. Symp. on FRP for RC Structures Baltimore SP-188 American Concrete Institute (ACI) (Oct. 31–Nov. 5 1999) C. W. Dolan S. H. Rizkalla and A. Nanni Eds. SP 188–68 791–805.
11. Cox J. V. and Herrmann L. R. (1992). “Confinement stress dependent bond behavior part II: A two degree of freedom plasticity model.” Proc. Int. Conf. on Bond in Concrete Riga Latvia 3 11.11–11.20.
12. 10.1002/(SICI)1099-1484(199804)3:2<155::AID-CFM45>3.0.CO;2-S10.1002/(SICI)1099-1484(199804)3:2<155::AID-CFM45>3.0.CO;2-S ↗
13. 10.1002/(SICI)1099-1484(199907)4:4<361::AID-CFM66>3.0.CO;2-F10.1002/(SICI)1099-1484(199907)4:4<361::AID-CFM66>3.0.CO;2-F ↗
14. 10.1177/00219983990330230210.1177/002199839903302302 ↗
15. Dolan C. W. Rizkalla S. H. and Nanni A. eds. (1999). Proc. 4th Int. Symp. on Fiber Reinforced Polymer Reinforcement for Reinforced Concrete Structures FRPRCS-4 ACI SP-188 Baltimore.
16. Eligehausen R. Popov E. P. and Bertero V. V. (1983). “Local bond stress-slip relations of deformed bars under generalized excitations.” Rep. No. UCB/EERC-83/23 Univ. of California Berkeley Calif.
17. Faoro M. (1992). “Bearing and deformation behavior of structural components with reinforcements comprising resin glass fiber bars and conventional ribbed steel bars.” Proc. Int. Conf. on Bond in Concrete Riga Latvia 3 8.17–8.26.
18. 10.1106/80KY-U1F7-BYH4-6EQC10.1106/80KY-U1F7-BYH4-6EQC ↗
19. Guo J. and Cox J. V. (2000b). “Modeling the mechanical interlocking between FRP reinforcing bars and concrete.” American Society for Composites’ 15th Annual Technical Conf. College Station Tex. September 819–826.10.1106/80KY-U1F7-BYH4-6EQC ↗
20. 10.1115/1.316708110.1115/1.3167081 ↗
21. 10.1016/0008-8846(76)90007-710.1016/0008-8846(76)90007-7 ↗
22. Malvar L. J. (1994). “Bond stress-slip characteristics of FRP rebars ” Technical Rep. TR-2013-SHR Naval Facilities Engineering Service Center Port Hueneme Calif.
23. Tensile and bond properties of GFRP reinforcing bars.
24. 10.1061/(ASCE)1090-0268(2003)7:2(154)10.1061/(ASCE)1090-0268(2003)7:2(154) ↗
25. Nanni A. Ed. (1993). Fiber-reinforced-plastic (FRP) reinforcement for concrete structures: Properties and applications Elsevier Amsterdam The Netherlands.
26. Noghabai K. (1995). “Splitting of concrete in the anchoring zone of deformed bars.” Licentiate thesis 26L Div. of Struc. Eng. Lulea University of Technology Sweden.
27. 10.1061/(ASCE)0733-9445(1986)112:11(2462)10.1061/(ASCE)0733-9445(1986)112:11(2462) ↗
28. 10.1007/BF0247314910.1007/BF02473149 ↗
29. Rots J. G. (1988). “Computational modeling of concrete fracture.” Dissertation Dept. of Civil Engineering Delft Univ. of Technology Delft The Netherlands.
30. 10.1680/macr.1979.31.106.310.1680/macr.1979.31.106.3 ↗
31. Tepfers R. and Karlsson M. (1997). “Pull-out and tensile reinforcement splice tests using FRP C-Bars.” Non-metallic (FRP) reinforcement for concrete structures FRPRCS-3 Japan Concrete Institute Tokyo 357–364 Vol. 2.
32. Tepfers R. Molander I. and Thalenius K. (1992). “Experience from testing of concrete reinforced with carbon fiber and aramid fiber strands.” Proc. XIV. Nordic Concrete Cong. & Nordic Concrete Ind. Mtg. Reykjavik Iceland August 337–347 (Also Work 811 Publication 92:6 Chalmers University of Technology Goteborg Sweden).
33. Uppuluri V. S. Bakis C. E. Nanni A. and Boothby T. E. (1996). “Finite element modeling of the bond between fiber reinforced plastic (FRP) reinforcement and concrete.” Rep. No. CMTC-9602 Composites Manufacturing Tech. Center Penn State Univ. University Park Pa.
34. Yonezawa T. Ohno S. Kakizawa T. Inoue K. Fukata T. and Okamoto R. (1993). “A new three-dimensional FRP reinforcement.” Fiber-reinforced-plastic (FRP) reinforcement for concrete structures: Properties and applications A. Nanni ed. Elsevier Amsterdam The Netherlands 405–418.10.1016/B978-0-444-89689-6.50022-7 ↗