Acoustic Emission Damage Assessment of Steel/CFRP Bonds for Rehabilitation
Source abstract
Abstract
The use of adhesively bonded carbon fiber reinforced polymer (CFRP) laminates is increasingly being considered for the rehabilitation of metallic structures. The effective structural monitoring of steel/CFRP adhesive joints is of critical importance to assess the design service performance of the system, which ultimately depends on the bond damage tolerance at the load transfer regions. In the present study laboratory static and fatigue tests were conducted on steel/CFRP skin doubler and double strap joint specimens, which were monitored using the acoustic emission (AE) technique. The characteristics of the AE signals were correlated with the mechanical response of the samples, in order to understand the AE response associated with the accumulation of bond damage. One-dimensional source location was also performed to examine the initiation and the development of the disbond. The results show that AE parameter-based analysis is an effective nondestructive evaluation tool for bond damage detection and area location.
Source: openalex_inverted_index · Quality: baseline
Research context
OpenAlex topics: Ultrasonics and Acoustic Wave Propagation · Structural Health Monitoring Techniques · Smart Materials for Construction
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
Affiliations
Center for Infrastructure Studies, Univ. of Missouri at Rolla, Rolla, MO 65409-0710; formerly, Dept. of Structural and Transportation Engineering, Univ. of Padova, Via Marzolo 9, 35131 Padova, Italy.
Dept. of Structural Engineering, MC-0085, Univ. of California San Diego, La Jolla, CA 92093-0085.
Dept. of Structural Engineering, MC-0085, Univ. of California San Diego, La Jolla, CA 92093-0085 (corresponding author).
References (29)
Show source-provided references
1. 10.1061/(ASCE)1090-0268(2004)8:2(163)10.1061/(ASCE)1090-0268(2004)8:2(163) ↗
2. American Association of State Highway and Transportation Officials · 1998
3. American Society for Testing and Materials (ASTM). (2004). “Standard terminology for nondestructive examinations.” E1316-04a ASTM Philadelphia 3–7.
4. Baker A. A. · 2002
5. Bassetti A. (2001). “Lamelles précontraintes en fibres de carbone pour le renforcement de ponts rivetés endommagés par fatigue.” Ph.D. thesis Ecole Polytechnique Federale de Lausanne Lausanne Switzerland.
6. Cadei J. M. C. Stratford T. J. Hollaway L. C. and Duckett W. H. (2004). “Strengthening metallic structures using externally bonded fibre-reinforced composites.” Rep. No. CIRIA C595 CIRIA London.10.1533/9781845690649.7.693 ↗
7. Carlos M. F. Cole P. T. Vahaviolos S. J. and Halkyard T. (2000a). “Acoustic emission bridge inspection/monitoring strategies.” Proc. 4th Structural Materials Technology—An NDT Conf. S. Alampalli ed. Technomic Lancaster Pa. 179–183.
8. Carlos M. F. Miller R. K. and Tamutus T. A. (2000b). “Acoustic emission local area monitoring system.” Proc. 4th Structural Materials Technology—An NDT Conf. S. Alampalli ed. Technomic Lancaster Pa. 173–178.
9. Dunker K. F. Klaiber F. W. and Sanders W. W. Jr. (1987). “Bridge strengthening needs in the United States.” Transportation Research Record 1118 Transportation Research Board Washington D.C. 1–8.
10. European Committee for Standardization (CEN). (1992). “Design of steel structures: Part 1-1: General rules and rules for buildings.” ENV 1993-1-1 Eurocode 3 CEN Brussels Belgium.
11. Federal Highway Administration (FHwA). (2004). “Material type of structure by state.” Bridge programs NBI data ⟨http://www.fhwa.dot.gov/bridge/mat03.xls⟩
12. 10.1080/0021846860807494310.1080/00218468608074943 ↗
13. Hart-Smith L. J. (1973). “Adhesive-bonded double lap joints.” NASA-CR-112235 NASA Washington D.C.
14. 10.1016/0963-8695(91)90375-D10.1016/0963-8695(91)90375-D ↗
15. 10.1002/pse.11210.1002/pse.112 ↗
16. Erkenntnisse und folgerungen aus der messung von geräuschen bei zugbeanspruchung von metallischen werkstoffen (Information and conclusions from the measurement of noises in tensile stressing of metallic materials)
17. Kwon O.-Y. Kim T.-H. and Lee K.-J. (1999). “Monitoring of fatigue damage in adhesively bonded composite-metal joints by acoustic methods.” Proc. 15th World Conf. on Non-Destructive Testing Rome Italy.
18. 10.1121/1.163099910.1121/1.1630999 ↗
19. 10.1016/S0263-8223(02)00029-610.1016/S0263-8223(02)00029-6 ↗
20. Li Z. W. Yuyama S. Ohsawa I. Kimpara I. Kageyama K. and Yamaguchi K. (2003). “Fracture mechanics study of concrete beams reinforced with FRP sheets by a moment tensor analysis of acoustic emission.” Proc. 3rd Int. Conf. on Fracture Mechanics of Concrete and Concrete Structures Gifu Japan 1863–1872.
21. 10.1016/S1359-8368(03)00016-710.1016/S1359-8368(03)00016-7 ↗
22. 10.12989/sem.2005.20.5.58910.12989/sem.2005.20.5.589 ↗
23. Nozaka K. (2002). “Repair of fatigued steel bridge girders with carbon fiber strips.” Ph.D. thesis Univ. of Minnesota St. Paul Minn.
24. 10.1007/BF0232314610.1007/BF02323146 ↗
25. 10.1061/(ASCE)0733-9445(2003)129:2(186)10.1061/(ASCE)0733-9445(2003)129:2(186) ↗
26. 10.1061/(ASCE)1090-0268(2003)7:4(311)10.1061/(ASCE)1090-0268(2003)7:4(311) ↗
27. 10.1061/(ASCE)0733-9445(2003)129:1(30)10.1061/(ASCE)0733-9445(2003)129:1(30) ↗
28. Acoustic emission to model the fatigue behaviour of quasi-isotropic carbon-epoxy laminates composites
29. 10.1243/030932498151303910.1243/0309324981513039 ↗