Prestressed Carbon Fiber Reinforced Polymer Sheets for Strengthening Concrete Beams at Room and Low Temperatures
Source abstract
Abstract
A technique for strengthening damaged concrete beams using prestressed carbon fiber reinforced polymer (CFRP) sheets was developed at Queen’s University and the Royal Military College of Canada. As part of this study, an anchorage system was developed to directly prestress the CFRP sheets by jacking and reacting against the strengthened concrete beam itself. The feasibility and effectiveness of using bonded prestressed CFRP sheets to strengthen precracked concrete beams at both room (+22°C,+72°F) and low (−28°C,−20°F) temperatures have been investigated experimentally. Materials and prestress changes due to temperature variations that would affect and cause changes in flexural behavior were studied. The strengthened beams showed significant increases in flexural stiffness and ultimate capacity as compared to the control-unstrengthened beams. The flexural behavior of the strengthened beams was not adversely affected by short-term exposure to reduced temperature (−28°C,−20°F). In addition to the experimental investigation, analytical models were developed to predict the overall flexural behavior of the strengthened beams during prestressing of the CFRP sheets and under external loading at both room and low temperatures. The model accurately predicted the flexural beam behavior. Improved serviceability behavior and higher strength were predicted for beams strengthened with the bonded prestressed CFRP sheets.
Source: openalex_inverted_index · Quality: baseline
Research context
OpenAlex topics: Structural Behavior of Reinforced Concrete · Concrete Corrosion and Durability · Innovative concrete reinforcement materials
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
Affiliations
Assistant Professor, Dept. of Civil Engineering, Univ. of Calgary, 2500 University Dr. NW, Calgary AB, Canada, T2N 1N4.
Assistant Professor, Dept. of Civil Engineering, Royal Military College of Canada, Kingston, ON, P.O. Box 17000, STN FORCES, K7K 7B4, Canada.
Professor, Dept. of Civil Engineering, Queen’s Univ., 58 University Ave., Kingston, ON K7L 3N6, Canada.
References (31)
Show source-provided references
1. Andrä H. P. Sandner D. and Maier M. (1999). “Strengthening of reinforced concrete structures by prestressed or non-prestressed externally bonded carbon fibre reinforced polymer (CFRP) strips.” Proc. Int. Conf. on Specialist Techniques and Materials for Concrete Construction Dundee Scotland U.K. 103–111.
2. ASTM. (1997). “Standard test method for tensile properties of polymer matrix composite materials.” D 3039-97 West Conshohocken Pa.
3. Bridge code—Ontario highway bridge design code 3rd Ed. (1991). National Research Council Canada Canada.
4. Browne R. D. and Bamforth P. B. (1981). “The use of concrete for cryogenic storage: A summary of research past and present.” Proc. 1st Int. Conf. on Cryogenic Concrete The Concrete Society Newcastle Upon Tyne London 135–166.
5. Canadian Portland Cement Association (CPCA). (1995). “Design of concrete structures.” CAN-A23.3-94 2nd Ed. Ottawa.
6. Collins M. P. and Mitchell D. eds. (1987). Prestressed concrete basic Canadian Prestressed Concrete Institute Ottawa.
7. Darby J. Luke S. and Collins S. (2000). “Stressed and unstressed advanced composite plates for the repair and strengthening of structures.” Proc. 4th Int. Conf. on Bridge Management Inspection Maintenance Assessment and Repair Univ. of Surrey Guildford U.K. 500–507.
8. Darby J. Skwarski A. Brown P. and Haynes M. (1999). “Pre-stressed advanced composite plates for the repair and strengthening of structures.” Proc. 8th Int. Conf. on Structural Faults + Repair 99 (CD-Rom) London.
9. Deuring M. (1993). “Verstärken Von Stahlbeton mit gespannten Faserverbundwekstoffen [Post-strengthening of concrete structures with pretensioned advanced composites].” EMPA Research Rep. No. 224 Dübendorf Switzerland (in German).
10. Dutta P. K. Hui D. and Bhattacharya R. K. (1995). “On the effect of moisture and low temperature on polymeric composites.” Proc. Society of Engineering Science (SES’95) .
11. 10.1002/pse.7610.1002/pse.76 ↗
12. El-Hacha R. Wight R. G. and Green M. F. (2002). “Innovative system for prestressing FRP sheets.” ACI Struct. J. in press.
13. Ferrier E. Ennaceur C. Bigaud D. and Hamelin P. (2001). “Prestressed externally bonded FRP reinforcement for RC beams.” Proc. 5th Int. Symp. on Fiber Reinforced Plastics for Reinforced Concrete Structures (FRPRCS-5) 291–298.
14. FIB. (2001). “Externally bonded FRP reinforcement for RC structures.” Technical Rep. on Design and Use of Externally Bonded Fibre Reinforced Polymer Reinforcement (FRP EBR) for Reinforced Concrete Structures Bulletin 14.
15. Garden H. N. (1997). “The strengthening of reinforced concrete members using externally bonded composite materials.” Doctoral thesis Univ. of Surrey London.
16. 10.1007/BF0248042310.1007/BF02480423 ↗
17. Garden H. N. and Mays G. C. (1999). “Structural strengthening of concrete beams using prestressed plates.” Strengthening of Reinforced Cconcrete Structures Using Externally-Bonded FRP Composites in Structural and Civil Engineering L. C. Hollaway and M. B. Leeming eds. Woodhead Publishing Ltd. Cambridge England 135–182.10.1533/9781855737617.135 ↗
18. Huang Y. L. Yen T. Wu J. H. and Ong C. L. (2000). “Strengthening of reinforced concrete beams using prestressed glass fiber-reinforced plastic.” Proc. 4th Int. Conf. on Repair Rehabilitation and Maintenance of Concrete Structures and Innovations in Design and Construction (ACI SP-193) American Concrete Institute Detroit 925–936.
19. Izumo K. M. Saeki N. Asamizu T. and Shimura K. (1997). “Strengthening reinforced concrete beams by using prestressed fiber sheets.” Proc. 3rd Int. Symp. on Non-Metallic (FRP) Reinforcement for Concrete Structures (FRPRCS-3) 379–386.
20. 10.1016/0950-0618(95)00071-210.1016/0950-0618(95)00071-2 ↗
21. Meier U. (2001). “Polyfunctional use of advanced composite materials with concrete.” Proc. 3rd Int. Conf. on Concrete Under Severe Conditions (CONSEC’01) 11–18.
22. Meier U. Deuring M. Meier H. and Schwegler G. (1992). “Strengthening of structures with CFRP laminates: Research and applications in Switzerland.” Proc. 1st Int. Conf. on Advanced Composite Materials in Bridges and Structures (ACMBS-I) 243–251.
23. Naaman A. E. (1990). “A new methodology for the analysis of beams prestressed with external or unbonded tendons.” Proc. Int. Symp. on External Prestressing in Bridges (ACI SP-120) American Concrete Institute Detroit 339–354.
24. Stress at ultimate unbonded prestressing tendons. Part 2: Proposed methodology.
25. 10.1016/S0266-3538(98)00002-510.1016/S0266-3538(98)00002-5 ↗
26. 10.1061/(ASCE)0733-9445(1991)117:11(3417)10.1061/(ASCE)0733-9445(1991)117:11(3417) ↗
27. Saeki N. Shimura K. Izumo K. and Horigushi T. (1997). “Rehabilitation of reinforced concrete beams using prestressed fiber sheets.” Proc. Int. Conf. on Engineering Materials Paper 104 .
28. Strengthening of concrete structures with prestressed fiber reinforced plastic sheets.
29. Wight R. G. and Erki M. A. (2001). “CFRP strengthening of severely damaged reinforced concrete slabs.” Proc. 3rd Int. Conf. on Concrete Under Severe Conditions of Environment and Loading (CONSEC’01) 2191–2198.
30. Wight R. G. Green M. F. and Erki M. A. (1995). “Post-strengthening concrete beams with prestressed FRP sheets.” Proc. 2nd Int. Symp. on Non-Metallic (FRP) Reinforcement for Concrete Structures (FRPRCS-2) 568–575.
31. Wu Z. Matsuzaki T. Yokoyama K. and Kanda T. (1999). “Retrofitting method for reinforced concrete structures with externally prestressed carbon fiber sheets.” Proc. 4th Int. Symp. on Fiber Reinforced Polymer Reinforcement for Reinforced Concrete Structures (FRPRCS-4) ACI SP-188 American Concrete Institute Detroit 751–765.