Characterization of Textile-Reinforced Mortar: State of the Art and Detail-Level Modeling with a Free Open-Source Finite-Element Code
Source abstract
Abstract
The research addressed in the paper is aimed at calibrating a numerical model developed by using a free open-source finite-element code for the assessment of the structural performances of historical masonry buildings strengthened using the textile-reinforced mortar (TRM) technique. TRM is a near-surface-mounted system, which couples inorganic matrices with fiber-based textile or meshes. The main purpose is to develop a multiple-level numerical approach, starting with the detailed modeling of components and interfaces, followed by a computationally efficient intermediate level model, using layered elements, for the calibration of a lumped plasticity-based model suitable for the global analysis of structures. In this paper, the first research results are presented. In particular, a broad literature review concerning the mechanical characterization and analysis of TRM systems is collected. Then, the calibration of the numerical model, the validation through comparison with the results of experimental characterization tests available in the literature (tensile, shear bond, and in-plane shear tests) and a sensitivity analysis are reported. Nonlinear static analyses were performed, considering the nonlinearity of the composite material components and interfaces. The model was capable of accounting for the main parameters affecting the behavior of the composite material, such as the reinforcement ratio and orientation, the mortar characteristics and the wire–mortar interaction and proved to be a valid tool to investigate the optimization of TRM applicative details.
Source: openalex_inverted_index · Quality: baseline
Research context
OpenAlex topics: Masonry and Concrete Structural Analysis · Innovations in Concrete and Construction Materials · Building materials and conservation
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
Affiliations
Research Fellow, Dept. of Concrete and Masonry Structures, Faculty of Civil Engineering, Czech Technical Univ., Thákurova 7, 166 29 Praha 6, Czech Republic. ORCID: .
References (100+)
Show source-provided references
1. ACI (American Concrete Institute). 2016. Acceptance criteria for masonry and concrete strengthening using fabric-reinforced cementitious matrix (FRCM) and steel reinforced grout (SRG) composite systems. AC 434. Naples, FL: ACI.
2. ACI (American Concrete Institute). 2020. Guide to design and construction of externally bonded fabric-reinforced cementitious matrix (FRCM) and steel-reinforced grout (SRG) systems. ACI 549.6R-20. Farmington Hills, MI: ACI.
3. Alecci, V., M. De Stefano, R. Luciano, L. Rovero, and G. Stipo. 2016. “Experimental investigation on bond behavior of cement-matrix–based composites for strengthening of masonry structures.” J. Compos. Constr. 20 (1): 04015041. https://doi.org/10.1061/(ASCE)CC.1943-5614.0000598.10.1061/(ASCE)CC.1943-5614.0000598 ↗
4. Al-Lami, K., T. D’Antino, and P. Colombi. 2020. “Durability of fabric-reinforced cementitious matrix (FRCM) composites: A review.” Appl. Sci. 10 (5): 1714. https://doi.org/10.3390/app10051714.10.3390/app10051714 ↗
5. Arboleda, D., S. Babaeidarabad, C. D. Hays, and A. Nanni. 2014. “Durability of fabric reinforced cementitious matrix (FRCM) composites.” In Proc., 7th Int. Conf. on FRP Composites in Civil Engineering. Vancouver, Canada: International Institute for FRP in Construction.
6. Arboleda, D., F. G. Carozzi, A. Nanni, and C. Poggi. 2016. “Testing procedures for the uniaxial tensile characterization of fabric-reinforced cementitious matrix composites.” J. Compos. Constr. 20 (3): 04015063. https://doi.org/10.1061/(ASCE)CC.1943-5614.0000626.10.1061/(ASCE)CC.1943-5614.0000626 ↗
7. Ascione, F., M. Lamberti, A. Napoli, and R. Realfonzo. 2020. “Bond–slip models for the interface between steel fabric reinforced cementitious matrix and concrete substrate.” Composites, Part C: Open Access 3: 100078. https://doi.org/10.1016/j.jcomc.2020.100078.
8. Ascione, L., G. de Felice, and S. De Santis. 2015. “A qualification method for externally bonded fibre reinforced cementitious matrix (FRCM) strengthening systems.” Composites, Part B 78: 497–506. https://doi.org/10.1016/j.compositesb.2015.03.079.10.1016/j.compositesb.2015.03.079 ↗
9. Askouni, P. D., and C. G. Papanicolaou. 2017. “Experimental investigation of bond between glass textile reinforced mortar overlays and masonry: The effect of bond length.” Mater. Struct. 50 (2): 164. https://doi.org/10.1617/s11527-017-1033-7.10.1617/s11527-017-1033-7 ↗
10. Askouni, P. D., and C. G. Papanicolaou. 2019. “Textile reinforced mortar-to-masonry bond: Experimental investigation of bond-critical parameters.” Constr. Build. Mater. 207: 535–547. https://doi.org/10.1016/j.conbuildmat.2019.02.102.10.1016/j.conbuildmat.2019.02.102 ↗
11. Aveston, J., and A. Kelly. 1973. “Theory of multiple fracture of fibrous composites.” J. Mater. Sci. 8 (3): 352–362. https://doi.org/10.1007/BF00550155.10.1007/BF00550155 ↗
12. Barattucci, S., V. Sarhosis, A. W. Bruno, A. M. D’Altri, S. de Miranda, and G. Castellazzi. 2020. “An experimental and numerical study on masonry triplets subjected to monotonic and cyclic shear loadings.” Constr. Build. Mater. 254: 119313. https://doi.org/10.1016/j.conbuildmat.2020.119313.10.1016/j.conbuildmat.2020.119313 ↗
13. Barducci, S., V. Alecci, M. De Stefano, G. Misseri, L. Rovero, and G. Stipo. 2020. “Experimental and analytical investigations on bond behavior of basalt-FRCM systems.” J. Compos. Constr. 24 (1): 04019055. https://doi.org/10.1061/(ASCE)CC.1943-5614.0000985.10.1061/(ASCE)CC.1943-5614.0000985 ↗
14. Basset-Salom, L., and A. Guardiola-Víllora. 2014. “Seismic performance of masonry residential buildings in Lorca’s city centre, after the 11th May 2011 earthquake.” Bull. Earthquake Eng. 12 (5): 2027–2048. https://doi.org/10.1007/s10518-013-9559-8.10.1007/s10518-013-9559-8 ↗
15. Bellini, A., and C. Mazzotti. 2016. “Bond behavior and tensile properties of FRCM composites applied on masonry panels.” In Structural analysis of historical constructions: Anamnesis, diagnosis, therapy, controls, edited by K. Van Balen and E. Verstrynge. London. Taylor & Francis Group.
16. Bellini, A., S. K. Shahreza, and C. Mazzotti. 2019. “Cyclic bond behavior of FRCM composites applied on masonry substrate.” Composites, Part B 169: 189–199. https://doi.org/10.1016/j.compositesb.2019.04.009.10.1016/j.compositesb.2019.04.009 ↗
17. Bertolesi, E., F. G. Carozzi, G. Milani, and C. Poggi. 2014. “Numerical modeling of fabric reinforce cementitious matrix composites (FRCM) in tension.” Constr. Build. Mater. 70: 531–548. https://doi.org/10.1016/j.conbuildmat.2014.08.006.10.1016/j.conbuildmat.2014.08.006 ↗
18. Bertolesi, E., E. Grande, and G. Milani. 2019. “Numerical modeling of the bond behaviour of FRCM systems externally applied to masonry substrates.” J. Build. Pathol. Rehabil. 4: 4. https://doi.org/10.1007/s41024-019-0046-8.10.1007/s41024-019-0046-8 ↗
19. Bilotta, A., F. Ceroni, E. Nigro, and M. Pecce. 2017. “Experimental tests on FRCM strengthening systems for tuff masonry elements.” Constr. Build. Mater. 138: 114–133. https://doi.org/10.1016/j.conbuildmat.2017.01.124.10.1016/j.conbuildmat.2017.01.124 ↗
20. Binda, L., A. Anzani, and A. Saisi. 2003. “1.02 - Historic masonry structures.” In Comprehensive structural integrity, edited by I. Milne, R. O. Ritchie, and B. Karihaloo, 25–47. Oxford, UK: Pergamon.10.1016/B0-08-043749-4/01071-5 ↗
21. Boem I. 2021a. https://sites.google.com/view/confirmaproject.
22. Boem I. 2021b. “ConFiRMa dataset_01: simulation of CRM characterization tests with the OOFEM code (detailed level modelling) (v.01.1).” Accessed April 11 2022. https://doi.org/10.5281/zenodo.6448372.
23. Butler, M., V. Mechtcherine, and S. Hempel. 2009. “Experimental investigations on the durability of fiber–matrix interfaces in textile-reinforced concrete.” Cem. Concr. Compos. 31 (4): 221–231. https://doi.org/10.1016/j.cemconcomp.2009.02.005.10.1016/j.cemconcomp.2009.02.005 ↗
24. Butler, M., V. Mechtcherine, and S. Hempel. 2010. “Durability of textile reinforced concrete made with AR glass fiber: Effect of the matrix composition.” Mater. Struct. 43 (10): 1351–1368. https://doi.org/10.1617/s11527-010-9586-8.10.1617/s11527-010-9586-8 ↗
25. Caggegi, C., F. G. Carozzi, S. De Santis, F. Fabbrocino, F. Focacci, Ł. Hojdys, E. Lanoye, and L. Zuccarino. 2017. “Experimental analysis on tensile and bond properties of PBO and aramid fabric reinforced cementitious matrix for strengthening masonry structures.” Composites, Part B 127: 175–195. https://doi.org/10.1016/j.compositesb.2017.05.048.10.1016/j.compositesb.2017.05.048 ↗
26. Calabrese, A. S., P. Colombi, and T. D’Antino. 2019. “Analytical solution of the bond behavior of FRCM composites using a rigid-softening cohesive material law.” Composites, Part B 174: 107051. https://doi.org/10.1016/j.compositesb.2019.107051.10.1016/j.compositesb.2019.107051 ↗
27. Calabrese, A. S., T. D’Antino, P. Colombi, and C. Poggi. 2020. “Study of the influence of interface normal stresses on the bond behavior of FRCM composites using direct shear and modified beam tests.” Constr. Build. Mater. 262: 120029. https://doi.org/10.1016/j.conbuildmat.2020.120029.10.1016/j.conbuildmat.2020.120029 ↗
28. Calderini, C., and S. Lagomarsino. 2008. “Continuum model for in-plane anisotropic inelastic behavior of masonry.” J. Struct. Eng. 134 (2): 209–220. https://doi.org/10.1061/(ASCE)0733-9445(2008)134:2(209).10.1061/(ASCE)0733-9445(2008)134:2(209) ↗
29. Carloni, C., T. D’Antino, L. H. Sneed, and C. Pellegrino. 2018. “Three-dimensional numerical modeling of single-lap direct shear tests of FRCM-concrete joints using a cohesive damaged contact approach.” J. Compos. Constr. 22 (1): 04017048. https://doi.org/10.1061/(ASCE)CC.1943-5614.0000827.10.1061/(ASCE)CC.1943-5614.0000827 ↗
30. Carozzi, F. G., P. Colombi, G. Fava, and C. Poggi. 2016. “A cohesive interface crack model for the matrix–textile debonding in FRCM composites.” Compos. Struct. 143: 230–241. https://doi.org/10.1016/j.compstruct.2016.02.019.10.1016/j.compstruct.2016.02.019 ↗
31. Carozzi, F. G., G. Milani, and C. Poggi. 2014. “Mechanical properties and numerical modeling of fabric reinforced cementitious matrix (FRCM) systems for strengthening of masonry structures.” Compos. Struct. 107: 711–725. https://doi.org/10.1016/j.compstruct.2013.08.026.10.1016/j.compstruct.2013.08.026 ↗
32. Carozzi, F. G., and C. Poggi. 2015. “Mechanical properties and debonding strength of fabric reinforced cementitious matrix (FRCM) systems for masonry strengthening.” Composites, Part B 70: 215–230. https://doi.org/10.1016/j.compositesb.2014.10.056.10.1016/j.compositesb.2014.10.056 ↗
33. Carozzi, F. G., 2017. “Experimental investigation of tensile and bond properties of carbon-FRCM composites for strengthening masonry elements.” Composites, Part B 128: 100–119. https://doi.org/10.1016/j.compositesb.2017.06.018.10.1016/j.compositesb.2017.06.018 ↗
34. CEB (Comité Euro-International du Béton). 2010. Model code 2010. Paris: FIP.
35. CEN (Comité Européen de Normalisation). 2004. Design of concrete structures - Part 1-1: General rules and rules for buildings. EN 1992-1-1:2004, Eurocode 2. Brussels, Belgium: CEN.
36. CEN (Comité Européen de Normalisation). 2009. Testing hardened concrete - Part 6: Tensile splitting strength of test specimens. EN 12390-6:2009. Brussels, Belgium: CEN.
37. CEN (Comité Européen de Normalisation). 2019a. Steel for the reinforcement and prestressing of concrete - Test methods - Part 2: Welded fabric and lattice girders. EN ISO 15630-2:2019. Brussels, Belgium: CEN.
38. CEN (Comité Européen de Normalisation). 2019b. Testing hardened concrete - Part 3: Compressive strength of test specimens. EN 12390-3:2019. Brussels, Belgium: CEN.
39. CEN (Comité Européen de Normalisation). 2021. Testing hardened concrete - Part 13: Determination of secant modulus of elasticity in compression. EN 12390-13:2021. Brussels, Belgium: CEN.
40. CNR (Consiglio Nazionale delle Ricerche). 2020. Guide for the design and construction of externally bonded fibre reinforced inorganic matrix systems for strengthening existing structure. CNR-DT 215/2018, rev. June 2020. Rome: CNR.
41. Colombi, P., and T. D’Antino. 2019. “Analytical assessment of the stress-transfer mechanism in FRCM composites.” Compos. Struct. 220: 961–970. https://doi.org/10.1016/j.compstruct.2019.03.074.10.1016/j.compstruct.2019.03.074 ↗
42. Colombo, I., M. Colombo, A. Magri, G. Zani, and M. di Prisco. 2011. “Textile reinforced mortar at high temperatures.” Appl. Mech. Mater. 82: 202–207. https://doi.org/10.4028/www.scientific.net/AMM.82.202.10.4028/www.scientific.net/AMM.82.202 ↗
43. Contamine, R., A. Si Larbi, and P. Hamelin. 2011. “Contribution to direct tensile testing of textile reinforced concrete (TRC) composites.” Mater. Sci. Eng. A 528 (29–30): 8589–8598. https://doi.org/10.1016/j.msea.2011.08.009.10.1016/j.msea.2011.08.009 ↗
44. Cosenza, E., G. Manfredi, and R. Realfonzo. 1997. “Behavior and modeling of bond of FRP rebars to concrete.” J. Compos. Constr. 1 (2): 40–51. https://doi.org/10.1061/(ASCE)1090-0268(1997)1:2(40).10.1061/(ASCE)1090-0268(1997)1:2(40) ↗
45. CSLP (Consiglio Superiore del Lavori Pubblici). 2018. Guideline for the identification, qualification and acceptance control of fibre reinforced cementitious matrix (FRCM) used for the structural consolidation of existing constructions. [In Italian]. CSLP 01/01/2019, n.1. Rome: CSLP.
46. CSLP (Consiglio Superiore del Lavori Pubblici). 2019a. Guidelines for design, execution and maintenance of strengthening interventions by means of fibre reinforced cementitious matrix (FRCM) systems. [In Italian]. CSLP 03/12/2019, n. 627. Rome: CSLP.
47. CSLP (Consiglio Superiore del Lavori Pubblici). 2019b. Guideline for the identification, qualification and acceptance control of fiber-reinforced composites systems with preformed mesh, based on polymer matrix, used for the structural consolidation of existing constructions with the CRM (composite reinforced mortar) technique. [In Italian]. CSLP 29/05/2019, n. 292. Rome: CSLP.
48. Dalalbashi, A., B. Ghiassi, D. V. Oliveira, and A. Freitas. 2018a. “Effect of test setup on the fiber-to-mortar pullout response in TRM composites: Experimental and analytical modeling.” Composites, Part B 143: 250–268. https://doi.org/10.1016/j.compositesb.2018.02.010.10.1016/j.compositesb.2018.02.010 ↗
49. Dalalbashi, A., B. Ghiassi, D. V. Oliveira, and A. Freitas. 2018b. “Fiber-to-mortar bond behavior in TRM composites: Effect of embedded length and fiber configuration.” Composites, Part B 152: 43–57. https://doi.org/10.1016/j.compositesb.2018.06.014.10.1016/j.compositesb.2018.06.014 ↗
50. D’Ambrisi, A., L. Feo, and F. Focacci. 2013. “Experimental and analytical investigation on bond between carbon-FRCM materials and masonry.” Composites, Part B 46: 15–20. https://doi.org/10.1016/j.compositesb.2012.10.018.10.1016/j.compositesb.2012.10.018 ↗
51. D’Antino, T., C. Carloni, L. H. Sneed, and C. Pellegrino. 2014. “Matrix–fiber bond behavior in PBO FRCM composites: A fracture mechanics approach.” Eng. Fract. Mech. 117: 94–111. https://doi.org/10.1016/j.engfracmech.2014.01.011.10.1016/j.engfracmech.2014.01.011 ↗
52. D’Antino, T., P. Colombi, C. Carloni, and L. H. Sneed. 2018. “Estimation of a matrix–fiber interface cohesive material law in FRCM-concrete joints.” Compos. Struct. 193: 103–112. https://doi.org/10.1016/j.compstruct.2018.03.005.10.1016/j.compstruct.2018.03.005 ↗
53. D’Antino, T., and C. Papanicolaou. 2017. “Mechanical characterization of textile reinforced inorganic-matrix composites.” Composites, Part B 127: 78–91. https://doi.org/10.1016/j.compositesb.2017.02.034.10.1016/j.compositesb.2017.02.034 ↗
54. D’Antino, T., and C. Papanicolaou. 2018. “Comparison between different tensile test set-ups for the mechanical characterization of inorganic-matrix composites.” Constr. Build. Mater. 171: 140–151. https://doi.org/10.1016/j.conbuildmat.2018.03.041.10.1016/j.conbuildmat.2018.03.041 ↗
55. de Carvalho Bello, C. B., I. Boem, A. Cecchi, N. Gattesco, and D. V. Oliveira. 2019. “Experimental tests for the characterization of sisal fiber reinforced cementitious matrix for strengthening masonry structures.” Constr. Build. Mater. 219: 44–55. https://doi.org/10.1016/j.conbuildmat.2019.05.168.10.1016/j.conbuildmat.2019.05.168 ↗
56. de Felice, G., S. De Santis, L. Garmendia, B. Ghiassi, P. Larrinaga, P. B. Lourenço, D. V. Oliveira, F. Paolacci, and C. G. Papanicolaou. 2014. “Mortar-based systems for externally bonded strengthening of masonry.” Mater. Struct. 47 (12): 2021–2037. https://doi.org/10.1617/s11527-014-0360-1.10.1617/s11527-014-0360-1 ↗
57. De Santis, S., F. G. Carozzi, G. de Felice, and C. Poggi. 2017b. “Test methods for textile reinforced mortar systems.” Composites, Part B 127: 121–132. https://doi.org/10.1016/j.compositesb.2017.03.016.10.1016/j.compositesb.2017.03.016 ↗
58. De Santis, S., and G. de Felice. 2015. “Tensile behaviour of mortar-based composites for externally bonded reinforcement systems.” Composites, Part B 68: 401–413. https://doi.org/10.1016/j.compositesb.2014.09.011.10.1016/j.compositesb.2014.09.011 ↗
59. De Santis, S., 2017a. “Round robin test on tensile and bond behaviour of steel reinforced grout systems.” Composites, Part B 127: 100–120. https://doi.org/10.1016/j.compositesb.2017.03.052.10.1016/j.compositesb.2017.03.052 ↗
60. Donnini, J. 2019. “Durability of glass FRCM systems: Effects of different environments on mechanical properties.” Composites, Part B 174: 107047. https://doi.org/10.1016/j.compositesb.2019.107047.10.1016/j.compositesb.2019.107047 ↗
61. Donnini, J., F. De Caso y Basalo, V. Corinaldesi, G. Lancioni, and A. Nanni. 2017. “Fabric-reinforced cementitious matrix behavior at high-temperature: Experimental and numerical results.” Compos. Part B Eng. 108: 108–121. https://doi.org/10.1016/j.compositesb.2016.10.004.10.1016/j.compositesb.2016.10.004 ↗
62. Donnini, J., and V. Corinaldesi. 2017. “Mechanical characterization of different FRCM systems for structural reinforcement.” Constr. Build. Mater. 145: 565–575. https://doi.org/10.1016/j.conbuildmat.2017.04.051.10.1016/j.conbuildmat.2017.04.051 ↗
63. Donnini, J., V. Corinaldesi, and A. Nanni. 2016. “Mechanical properties of FRCM using carbon fabrics with different coating treatments.” Composites, Part B 88: 220–228. https://doi.org/10.1016/j.compositesb.2015.11.012.10.1016/j.compositesb.2015.11.012 ↗
64. Donnini, J., G. Lancioni, and V. Corinaldesi. 2018. “Failure modes in FRCM systems with dry and pre-impregnated carbon yarns: Experiments and modeling.” Composites, Part B 140: 57–67. https://doi.org/10.1016/j.compositesb.2017.12.024.10.1016/j.compositesb.2017.12.024 ↗
65. Dvorkin, D., A. Poursaee, A. Peled, and W. J. Weiss. 2013. “Influence of bundle coating on the tensile behavior, bonding, cracking and fluid transport of fabric cement-based composites.” Cem. Concr. Compos. 42: 9–19. https://doi.org/10.1016/j.cemconcomp.2013.05.005.10.1016/j.cemconcomp.2013.05.005 ↗
66. Fernandes, F., P. B. Lourenço, and F. Castro. 2010. “Ancient clay bricks: Manufacture and properties.” In Materials, technologies and practice in historic heritage structures, edited by M. B. Dan, R. Přikryl, and Á Török. Dordrecht, Netherlands: Springer.
67. Fiorentino, G., A. Forte, E. Pagano, F. Sabetta, C. Baggio, D. Lavorato, C. Nuti, and S. Santini. 2018. “Damage patterns in the town of Amatrice after August 24th 2016 Central Italy earthquakes.” Bull. Earthquake Eng. 16 (3): 1399–1423. https://doi.org/10.1007/s10518-017-0254-z.10.1007/s10518-017-0254-z ↗
68. Focacci, F., T. D’Antino, and C. Carloni. 2020. “The role of the fiber–matrix interfacial properties on the tensile behavior of FRCM coupons.” Constr. Build. Mater. 265: 120263. https://doi.org/10.1016/j.conbuildmat.2020.120263.10.1016/j.conbuildmat.2020.120263 ↗
69. Focacci, F., T. D’Antino, C. Carloni, L. H. Sneed, and C. Pellegrino. 2017. “An indirect method to calibrate the interfacial cohesive material law for FRCM-concrete joints.” Mater. Des. 128: 206–217. https://doi.org/10.1016/j.matdes.2017.04.038.10.1016/j.matdes.2017.04.038 ↗
70. Gattesco, N., and I. Boem. 2015. “Experimental and analytical study to evaluate the effectiveness of an in-plane reinforcement for masonry walls using GFRP meshes.” Constr. Build. Mater. 88: 94–104. https://doi.org/10.1016/j.conbuildmat.2015.04.014.10.1016/j.conbuildmat.2015.04.014 ↗
71. Gattesco, N., and I. Boem. 2017a. “Characterization tests of GFRM coating as a strengthening technique for masonry buildings.” Compos. Struct. 165: 209–222. https://doi.org/10.1016/j.compstruct.2017.01.043.10.1016/j.compstruct.2017.01.043 ↗
72. Gattesco, N., and I. Boem. 2017b. “Out-of-plane behavior of reinforced masonry walls: Experimental and numerical study.” Composites, Part B 128: 39–52. https://doi.org/10.1016/j.compositesb.2017.07.006.10.1016/j.compositesb.2017.07.006 ↗
73. Ghiassi, B., D. V. Oliveira, V. Marques, E. Soares, and H. Maljaee. 2016. “Multi-level characterization of steel reinforced mortars for strengthening of masonry structures.” Mater. Des. 110: 903–913. https://doi.org/10.1016/j.matdes.2016.08.034.10.1016/j.matdes.2016.08.034 ↗
74. Gostič S. and B. Dolinšek. 2008. “Lessons learned after 1998 and 2004 earthquake in Posočje region.” In Proc. 4th Int i-Rec Conf. Building Resilience: Achieving Effective Post-Disaster Reconstruction edited by D. Myburgh E. Seville and S. Wilkinson. Christchurch New Zealand: University of Canterbury.
75. Grande, E., M. Imbimbo, and E. Sacco. 2013. “Modeling and numerical analysis of the bond behavior of masonry elements strengthened with SRP/SRG.” Composites, Part B 55: 128–138. https://doi.org/10.1016/j.compositesb.2013.06.003.10.1016/j.compositesb.2013.06.003 ↗
76. Grande, E., M. Imbimbo, and E. Sacco. 2018. “Numerical investigation on the bond behavior of FRCM strengthening systems.” Composites, Part B 145: 240–251. https://doi.org/10.1016/j.compositesb.2018.03.010.10.1016/j.compositesb.2018.03.010 ↗
77. Grande, E., and G. Milani. 2018. “Interface modeling approach for the study of the bond behavior of FRCM strengthening systems.” Composites, Part B 141: 221–233. https://doi.org/10.1016/j.compositesb.2017.12.052.10.1016/j.compositesb.2017.12.052 ↗
78. Grande, E., G. Milani, and M. Imbimbo. 2020. “Theoretical model for the study of the tensile behavior of FRCM reinforcements.” Constr. Build. Mater. 236: 117617. https://doi.org/10.1016/j.conbuildmat.2019.117617.10.1016/j.conbuildmat.2019.117617 ↗
79. Grassl, P., and M. Jirásek. 2006. “Damage-plastic model for concrete failure.” Int. J. Solids Struct. 43 (22–23): 7166–7196. https://doi.org/10.1016/j.ijsolstr.2006.06.032.10.1016/j.ijsolstr.2006.06.032 ↗
80. Hadad, H., D. Campanini, and A. Nanni. 2021. Effect of bonded length on material characterization of FRCM composites. ACI Symposium Publication 345. Farmington Hills, MI: ACI.
81. Kim, H.-S., G. T. Truong, S.-H. Park, and K. K. Choi. 2018. “Tensile properties of carbon fiber-textile reinforced mortar (TRM) characterized by different anchorage methods.” Int. J. Concr. Struct. Mater. 12 (1): 73. https://doi.org/10.1186/s40069-018-0296-x.10.1186/s40069-018-0296-x ↗
82. Kouris, L. A. S., and T. C. Triantafillou. 2018. “State-of-the-art on strengthening of masonry structures with textile reinforced mortar (TRM).” Constr. Build. Mater. 188: 1221–1233. https://doi.org/10.1016/j.conbuildmat.2018.08.039.10.1016/j.conbuildmat.2018.08.039 ↗
83. Larrinaga, P., C. Chastre, H. C. Biscaia, and J. T. San-José. 2014. “Experimental and numerical modeling of basalt textile reinforced mortar behavior under uniaxial tensile stress.” Mater. Des. 55: 66–74. https://doi.org/10.1016/j.matdes.2013.09.050.10.1016/j.matdes.2013.09.050 ↗
84. Larrinaga, P., C. Chastre, J. T. San-José, and L. Garmendia. 2013. “Non-linear analytical model of composites based on basalt textile reinforced mortar under uniaxial tension.” Composites, Part B 55: 518–527. https://doi.org/10.1016/j.compositesb.2013.06.043.10.1016/j.compositesb.2013.06.043 ↗
85. Leone, M., 2017. “Glass fabric reinforced cementitious matrix: Tensile properties and bond performance on masonry substrate.” Composites, Part B 127: 196–214. https://doi.org/10.1016/j.compositesb.2017.06.028.10.1016/j.compositesb.2017.06.028 ↗
86. Lignola, G. P., 2017. “Performance assessment of basalt FRCM for retrofit applications on masonry.” Composites, Part B 128: 1–18. https://doi.org/10.1016/j.compositesb.2017.05.003.10.1016/j.compositesb.2017.05.003 ↗
87. Lin, Q., X. Xue, Z. Guo, Y. Zhao, and Y. Chen. 2021. “Test on shear behavior of less-tightened high-strength bolted connections.” Structures 34: 3622–3639. https://doi.org/10.1016/j.istruc.2021.09.104.10.1016/j.istruc.2021.09.104 ↗
88. Liu, S., X. Wang, P. Rawat, Z. Chen, C. Shi, and D. Zhu. 2021. “Experimental study and analytical modeling on tensile performance of basalt textile reinforced concrete.” Constr. Build. Mater. 267: 120972. https://doi.org/10.1016/j.conbuildmat.2020.120972.10.1016/j.conbuildmat.2020.120972 ↗
89. Liu, S., D. Zhu, X. Wang, and C. Shi. 2019. “Pullout properties of AR-glass textile embedded in cement matrix under different velocities and temperatures.” Constr. Build. Mater. 228: 116779. https://doi.org/10.1016/j.conbuildmat.2019.116779.10.1016/j.conbuildmat.2019.116779 ↗
90. Lourenço, P. B., and J. G. Rots. 1997. “Multisurface interface model for analysis of masonry structures.” J. Eng. Mech. 123 (7): 660–668. https://doi.org/10.1061/(ASCE)0733-9399(1997)123:7(660).10.1061/(ASCE)0733-9399(1997)123:7(660) ↗
91. Macorini, L., and B. A. Izzuddin. 2013. “Nonlinear analysis of masonry structures using mesoscale partitioned modelling.” Adv. Eng. Software 60–61: 58–69. https://doi.org/10.1016/j.advengsoft.2012.11.008.10.1016/j.advengsoft.2012.11.008 ↗
92. Magenes, G. 2000. “A method for pushover analysis in seismic assessment of masonry buildings.” In Proc XII World Conf. on Earthquake Engineering. Auckland, NZ: New Zealand Society for Earthquake Engineering.
93. Makovička, D., and D. Makovička, Jr. 2003. “Explosive failuring of masonry structure.” In Transactions of the 17th Int. Conf. on Structural Mechanics in Reactor Technology, paper #J04-2. Prague, Czech Republic: International Association for Structural Mechanics in Reactor Technology SMiRT.
94. Martins, A., G. Vasconcelos, R. Fangueiro, and F. Cunha. 2015. “Experimental assessment of an innovative strengthening material for brick masonry infills.” Composites, Part B 80: 328–342. https://doi.org/10.1016/j.compositesb.2015.06.012.10.1016/j.compositesb.2015.06.012 ↗
95. Micelli, F., and M. A. Aiello. 2019. “Residual tensile strength of dry and impregnated reinforcement fibers after exposure to alkaline environments.” Composites, Part B 159: 490–501. https://doi.org/10.1016/j.compositesb.2017.03.005.10.1016/j.compositesb.2017.03.005 ↗
96. Micelli, F., et al. 2017. “Experimental investigation of tensile and bond properties of carbon-FRCM composites for strengthening masonry elements.” Composites, Part B 128: 100–119. https://doi.org/10.1016/j.compositesb.2017.06.018.10.1016/j.compositesb.2017.06.018 ↗
97. Nerilli, F., S. Marfia, and E. Sacco. 2020. “Micromechanical modeling of the constitutive response of FRCM composites.” Constr. Build. Mater. 236: 117539. https://doi.org/10.1016/j.conbuildmat.2019.117539.10.1016/j.conbuildmat.2019.117539 ↗
98. Nobili, A. 2016. “Durability assessment of impregnated glass fabric reinforced cementitious matrix (GFRCM) composites in the alkaline and saline environments.” Constr. Build. Mater. 105: 465–471. https://doi.org/10.1016/j.conbuildmat.2015.12.173.10.1016/j.conbuildmat.2015.12.173 ↗
99. Nobili, A., and C. Signorini. 2017. “On the effect of curing time and environmental exposure on impregnated carbon fabric reinforced cementitious matrix (CFRCM) composite with design considerations.” Composites, Part B 112: 300–313. https://doi.org/10.1016/j.compositesb.2016.12.022.10.1016/j.compositesb.2016.12.022 ↗
100. Öhman M. 2020. “Oofem/oofem: OOFEM version 2.5 (v2.5).” Accessed November 18 2021. https://doi.org/10.5281/zenodo.4339630.