Fiber-Reinforced-Cementitious-Composites Plate for Anchoring FRP Sheet on Concrete Member
Source abstract
Abstract
To improve the fiber-reinforced polymer (FRP)/concrete bond capacity, this paper presents a new anchoring approach with the gluing of precast fiber-reinforced cementitious composites (FRCC) plate on top of the FRP sheets. In order to measure the improvement in ultimate load and deformation capacity and to study the failure mechanisms around the anchored area, the direct shear bond test is performed on concrete prisms with bonded FRP. Several sets of tests have been carried out with anchoring plates of different FRCC compositions and lengths. Comparison with the control sample shows that the installation of FRCC plate can significantly increase both the bond and deformation capacities (by up to 100%). On the basis of the shear bond test, two types of FRCC plate materials were found to be particularly effective and were selected for strengthening of beam members to be tested under four-point bending. Comparison with control members (without anchor) and those with conventional U-shaped FRP anchors indicates that both the ultimate load and central deflection can be improved by the new anchoring method.
Source: openalex_inverted_index · Quality: baseline
Research context
OpenAlex topics: Structural Behavior of Reinforced Concrete · Concrete Corrosion and Durability · Innovative concrete reinforcement materials
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
Affiliations
M.Phil., Dept. of Civil and Environmental Engineering, The Hong Kong Univ. of Science and Technology, Clear Water Bay, Hong Kong, China (corresponding author).
Professor, Dept. of Civil and Environmental Engineering, The Hong Kong Univ. of Science and Technology, Clear Water Bay, Hong Kong, China.
References (32)
Show source-provided references
1. Brosens K. and van Gemert D. (1997). “Anchoring stresses between concrete and carbon fiber reinforced laminates.” Non-metallic (FRP) Reinforcement for Concrete Structures Proc. 3rd Int. Symp. Sapporo Japan 271–278.
2. 10.1016/j.conbuildmat.2010.03.00810.1016/j.conbuildmat.2010.03.008 ↗
3. 10.1061/(ASCE)0733-9445(2001)127:7(784)10.1061/(ASCE)0733-9445(2001)127:7(784) ↗
4. Cheung A. K. F. and Leung C. K. Y. (2008). “Experimental study on the bond between steel reinforcement and self-compacting high strength fiber reinforced cementitious composites.” Proc. 7th Int. RILEM Symp. on Fibre Reinforced Concrete: Design and applications BEFIB RILEM Chennai India 667–678.
5. Performance of two anchor systems of externally bonded fiber-reinforced polymer laminates
6. 10.1260/13694330978986783610.1260/136943309789867836 ↗
7. 10.1016/S0263-8223(98)00070-110.1016/S0263-8223(98)00070-1 ↗
8. Hiroyuki Y. and Wu Z. (1997). “Analysis of debonding fracture properties of CFS strengthened member subject to tension.” Non-Metallic (FRP) Reinforcement for Concrete Structures Proc. 3rd Int. Symp. Japan Concrete Inst. Sapporo Japan 287–294.
9. 10.1016/S0958-9465(99)00051-710.1016/S0958-9465(99)00051-7 ↗
10. Kobataka Y. · 1993 · 43510.1016/B978-0-444-89689-6.50024-0 ↗
11. Lee S. Leung C. K. Y. Chen Z. Xu M. and Tang J. M. (2004). “Design guidelines for strengthening concrete structures using externally bonded fiber reinforced plastic systems.” HKUST Advanced Engineering Materials Facility Research Rep.
12. 10.1061/(ASCE)0899-1561(2001)13:2(106)10.1061/(ASCE)0899-1561(2001)13:2(106) ↗
13. 10.1016/j.cemconcomp.2006.05.01510.1016/j.cemconcomp.2006.05.015 ↗
14. 10.1617/s11527-009-9561-410.1617/s11527-009-9561-4 ↗
15. Li Z · 200910.1201/9781482265972 ↗
16. Neuner J. and Falabella R. (1996). “Composite anchor system: Flatwise tensile and shear testing.” Internal Rep. Hexcel Stamford CT
17. 10.1061/(ASCE)1090-0268(2001)5:1(12)10.1061/(ASCE)1090-0268(2001)5:1(12) ↗
18. 10.1061/(ASCE)CC.1943-5614.000006410.1061/(ASCE)CC.1943-5614.0000064 ↗
19. Shear deformation debonding of adhesively bonded plates
20. 10.1061/(ASCE)1090-0268(2008)12:6(608)10.1061/(ASCE)1090-0268(2008)12:6(608) ↗
21. Özdemir G. (2005). “Mechanical properties of CFRP anchorages.” Master of Science thesis Middle East Tech. Univ. Istanbul Turkey.
22. 10.1061/(ASCE)1090-0268(2007)11:6(611)10.1061/(ASCE)1090-0268(2007)11:6(611) ↗
23. 10.1061/(ASCE)1090-0268(2001)5:1(44)10.1061/(ASCE)1090-0268(2001)5:1(44) ↗
24. External reinforcement of concrete beams using fiber reinforced plastic
25. Smith S. T. and Teng J. G. (2001). “Debonding failures in FRP-plated RC Beams with or without U strip end anchorage.” Proc. FRP Composites in Civil Engineering 1 607–615.
26. Täljsten B. (1994). “Plate bonding. Strengthening of existing concrete structures with epoxy bonded plates of steel or fibre reinforced plastics.” Ph.D. thesis University of Technology Luleá Sweden.
27. 10.1061/(ASCE)0899-1561(1997)9:4(206)10.1061/(ASCE)0899-1561(1997)9:4(206) ↗
28. Teng J. G. · 2002
29. 10.1016/S0950-0618(03)00043-610.1016/S0950-0618(03)00043-6 ↗
30. 10.1016/j.engstruct.2006.11.02210.1016/j.engstruct.2006.11.022 ↗
31. 10.1260/13694330577435310610.1260/136943305774353106 ↗
32. Guideline towards the design of reinforced concrete beams with external plates