A toolbox for microvalve-based bioprinting
Source abstract
Abstract
Abstract Microvalve-based bioprinting (MBB) enables precise deposition of bioinks in the form of droplets through the controlled ejection of nanoliter-scale cylindrical ligaments. Despite its increasing use in tissue biofabrication, standardization criteria for assessing bioink printability remain limited. In this study, we present a quantitative printability toolbox for evaluating various bioinks, including fibrinogen, collagen type I, Matrigel, alginate, agarose and methacrylated gelatin (GelMA), in the context of MBB. We systematically analyzed how rheological properties and the contact angle influence ligament formation and droplet ejection. High-speed imaging captured ligament dynamics such as velocity and volume as well as droplet-substrate interactions. The role of Tween 20 (T20) surfactant was further investigated to reduce interfacial aggregation and improve droplet uniformity. Our results revealed viscosity and concentration thresholds specific to each bioink, enabling the construction of a comprehensive printability map correlating bioink properties with ligament stability and droplet printability. This framework provides a practical guide for bioink optimization in MBB towards reproducible fabrication of complex biological structures for biomedical applications.
Source: crossref · Quality: baseline
Research context
OpenAlex topics: 3D Printing in Biomedical Research · Nanomaterials and Printing Technologies · Innovative Microfluidic and Catalytic Techniques Innovation
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (81)
Show source-provided references
1. Droplet-based bioprinting10.1038/s43586-025-00394-y ↗
2. Comparison of micro-dispensing performance between micro-valve and piezoelectric printhead10.1007/s00542-009-0905-3 ↗
3. Multi-layered culture of human skin fibroblasts and keratinocytes through three-dimensional freeform fabrication10.1016/j.biomaterials.2008.12.009 ↗
4. Jetting-based bioprinting: process, dispense physics, and applications10.1007/s42242-024-00285-3 ↗
5. Microvalve-based bioprinting—process, bio-inks and applications10.1039/C6BM00861E ↗
6. Characterizing the effects of cell settling on bioprinter output10.1088/1758-5082/4/1/011001 ↗
7. Advancements in high-resolution 3D bioprinting: exploring technological trends, bioinks and achieved resolutions10.1016/j.bprint.2024.e00376 ↗
8. Investigation of cell concentration change and cell aggregation due to cell sedimentation during inkjet-based bioprinting of cell-laden bioink10.3390/machines10050315 ↗
9. It’s harder to splash on soft solids10.1103/PhysRevLett.117.184502 ↗
10. Breakup of asymmetric liquid ligaments10.1103/PhysRevFluids.4.124004 ↗
11. Penetration and ligament formation of viscoelastic droplets impacting on the superhydrophobic mesh10.1038/s41598-022-15645-1 ↗
12. Strategies to use fibrinogen as bioink for 3D bioprinting fibrin-based soft and hard tissues10.1016/j.actbio.2020.09.024 ↗
13. Natural hydrogel-based bio-inks for 3D bioprinting in tissue engineering: a review10.3390/gels8030179 ↗
14. Alginate-based bioinks for 3D bioprinting and fabrication of anatomically accurate bone grafts10.1089/ten.tea.2020.0305 ↗
15. Matrigel uses in cell biology and for the identification of thymosin β4, a mediator of tissue regeneration10.1007/s13765-018-0400-6 ↗
16. Collagen-based bioinks for regenerative medicine: fabrication, application and prospective10.1016/j.medntd.2023.100211 ↗
17. Agarose-based biomaterials for tissue engineering10.1016/j.carbpol.2018.01.060 ↗
18. Advancements in GelMA bioactive hydrogels: strategies for infection control and bone tissue regeneration10.7150/thno.103725 ↗
19. Tween-20 transiently changes the surface morphology of PK-15 cells and improves PCV2 infection10.1186/s12917-018-1457-5 ↗
20. Disruption of escherichia coli amyloid-integrated biofilm formation at the air-liquid interface by a polysorbate surfactant10.1021/la304710k ↗
21. Interparticle crosslinked ion-responsive microgels for 3D and 4D (Bio)printing applications10.1002/smll.202502262 ↗
22. MathWorks Inc. version R2023b
23. Methodical fitting for mathematical models of rubber-like materials10.1098/rspa.2016.0811 ↗
24. COMSOL® software version 6.4 release highlights
25. Rheology in product development: an insight into 3D printing of hydrogels and aerogels10.3390/gels9120986 ↗
26. Leveraging printability and biocompatibility in materials for printing implantable vessel scaffolds10.1016/j.mtbio.2024.101366 ↗
27. Inkjet printing of functional and structural materials: fluid property requirements, feature stability, and resolution10.1146/annurev-matsci-070909-104502 ↗
28. Effects of fluid viscosity on drop-on-demand ink-jet break-off10.2352/ISSN.2169-4451.2010.26.1.art00004_1 ↗
29. Fundamental fluid dynamics challenges in inkjet printing10.1146/annurev-fluid-022321-114001 ↗
30. The role of concentration on drop formation and breakup of collagen, fibrinogen, and thrombin solutions during inkjet bioprinting10.1021/acs.langmuir.0c02926 ↗
31. Rheological investigation of collagen, fibrinogen, and thrombin solutions for drop-on-demand 3D bioprinting10.1039/D0SM01455A ↗
32. Effect of edge fracture on constant torque rheometry of entangled polymer solutions10.1021/ma0510901 ↗
33. Homogeneous shear, wall slip, and shear banding of entangled polymeric liquids in simple-shear rheometry: a roadmap of nonlinear rheology10.1021/ma101223q ↗
34. Using a cellular system to directly assess the effects of cosmetic microemulsion encapsulated deoxyarbutin10.3390/ijms222313110 ↗
35. Enhanced production of hCTLA4Ig through increased permeability in transgenic rice cell ccultures10.7841/ksbbj.2016.31.4.277 ↗
36. Cyto/genotoxicity study of polyoxyethylene (20) sorbitan monolaurate (tween 20)10.1089/dna.2013.2059 ↗
37. Steady shear rheology and surface activity of polymer-surfactant mixtures10.3390/polym17030364 ↗
38. Effect of composition and interfacial tension on the rheology and morphology of heavy oil-in-water emulsions10.1021/acsomega.0c00769 ↗
39. Rheology Impact of various hydrophilic-hydrophobic balance (HLB) index non-ionic surfactants on cyclopentane hydrates10.3390/molecules25163725 ↗
40. Suppression and utilization of satellite droplets for inkjet printing: a review10.3390/pr10050932 ↗
41. The roles of wettability and surface tension in droplet formation during inkjet printing10.1038/s41598-017-12189-7 ↗
42. Role of surfactants in droplet formation in piezoacoustic inkjet printing across microsecond-to-second timescales10.1103/PhysRevApplied.23.024076 ↗
43. 25th anniversary article: engineering hydrogels for biofabrication10.1002/adma.201302042 ↗
44. A review on alginate-based bioinks, combination with other natural biomaterials and characteristics10.1177/08853282221085690 ↗
45. Collagen as bioink for bioprinting: a comprehensive review10.18063/ijb.v6i3.270 ↗
46. Bioink properties before, during and after 3D bioprinting10.1088/1758-5090/8/3/032002 ↗
47. Parametric study of deformation and breakup of non-newtonian droplet10.15406/aaoaj.2021.05.00127 ↗
48. Physics of droplet impact on various substrates and its current advancements in interfacial science: a review10.1063/5.0130043 ↗
49. Printability and shape fidelity of bioinks in 3D bioprinting10.1021/acs.chemrev.0c00084 ↗
50. Understanding droplet jetting on varying substrate for biological applications10.18063/ijb.758 ↗
51. Phase diagram of pinch-off behaviors during drop-on-demand inkjetting of alginate solutions10.1115/1.4044252 ↗
52. Influence of the physico-chemical bioink composition on the printability and cell biological properties in 3D-bioprinting of a liver tumor cell line10.3389/fbioe.2023.1093101 ↗
53. Droplet breakup driven by shear thinning solutions in a microfluidic T-junction10.1103/PhysRevFluids.2.123602 ↗
54. Parametric study of jet/droplet formation process during LIFT printing of living cell-laden bioink10.3390/mi12111408 ↗
55. ATPS bioinks and microgel formation for bioprinting10.36922/ijb.8387 ↗
56. Current trends on protein driven bioinks for 3D printing10.3390/pharmaceutics13091444 ↗
57. Optimization of gelatin-alginate composite bioink printability using rheological parameters: a systematic approach10.1088/1758-5090/aacdc7 ↗
58. Drop-on-demand printing of complex liquids10.2352/ISSN.2169-4451.2013.29.1.art00005_2 ↗
59. Transition to elasto-capillary thinning dynamics in viscoelastic jets10.1017/jfm.2024.787 ↗
60. Physics of liquid jets10.1088/0034-4885/71/3/036601 ↗
61. Ligament flow during drop-on-demand inkjet printing of bioink containing living cells10.1063/1.4978744 ↗
62. Drop formation in inkjet printing10.1002/9783527684724.ch4 ↗
63. Study of droplet formation process during drop-on-demand inkjetting of living cell-laden bioink10.1021/la501430x ↗
64. Effect of varying cell densities on the rheological properties of the bioink10.1016/j.bprint.2022.e00241 ↗
65. Rheological, structural, and biological trade-offs in bioink design for 3D bioprinting10.3390/gels11080659 ↗
66. Tailoring of the rheological properties of bioinks to improve bioprinting and bioassembly for tissue replacement10.1016/j.bbagen.2020.129782 ↗
67. Effective bioprinting resolution in tissue model fabrication10.1039/C8LC01037D ↗
68. Contact line dynamics and droplet spreading10.3390/fluids10080206 ↗
69. Control of droplet formation in inkjet printing using ohnesorge number category: materials and processes10.1109/EPTC.2008.4763524 ↗
70. Experimental study of the parameters for stable drop-on-demand inkjet performance10.1063/1.5085868 ↗
71. Drop-on-demand inkjet-based cell printing with 30 μm nozzle diameter for cell-level accuracy10.1063/1.4968845 ↗
72. Simulation and experimental study on droplet breakup modes and redrawing of their phase diagram10.1063/5.0057956 ↗
73. Drop splashing induced by target roughness and porosity: the size plays no role10.1016/j.cis.2015.02.004 ↗
74. What controls dynamics of droplet shape evolution upon impingement on a solid surface?10.1002/aic.14050 ↗
75. Spreading and splashing of drops impacting rough substrates10.1017/jfm.2021.313 ↗
76. Velocity field and cavity dynamics in drop impact experiments10.1017/jfm.2023.297 ↗
77. Breakup of liquid filaments10.1103/PhysRevLett.108.074506 ↗
78. Droplet generation from pulsed micro-jets10.1016/j.expthermflusci.2008.06.002 ↗
79. Inkjet metrology II: resolved effects of ejection frequency, fluidic pressure, and droplet number on reproducible drop-on-demand dispensing10.1021/la201728f ↗
80. Effect of surfactants on jet break-up in drop-on-demand inkjet printing10.1063/5.0056803 ↗
81. Jetting behavior in drop-on-demand printing: laboratory experiments and numerical simulations10.1103/PhysRevFluids.5.043603 ↗