journal article·2023-01-01Open access

High-resolution 3D printing of angle-ply annulus fibrosus scaffolds for intervertebral disc regeneration

Zhao Liu, Huan Wang, Zhangqin Yuan, Qiang Wei, Fengxuan Han, Song Chen, Hao Xu, Jiaying Li, Jiayuan Wang, Zexi Li, Qixin Chen, Jerry Fuh, Lin Ding, Hui Wang, Bin Li

Biofabrication· Volume 15· Issue 1

Abstract

Abstract Intervertebral disc (IVD) degeneration is one of the leading causes of disability, and current therapies are mainly unsatisfactory. The key pathological feature during IVD degeneration is the dysfunction of annulus fibrosus (AF). Although tissue-engineered AF has shown great promise for IVD regeneration, the design and fabrication of biomimetic AF scaffold remains a challenge due to the complexity of its structure. Nowadays, 3D printing technology has drawn great attention due to its customizable processes and ability to produce complex tissue architecture. However, few existing 3D printing methods can accurately replicate the fine angle-ply architecture of native AF, which is one of the most critical steps for IVD regeneration, due to the limited printing resolution. In this study, we aimed to fabricate high-resolution polycaprolactone (PCL) scaffolds using a newly developed electrohydrodynamic 3D printing technique. The structural advantages of such scaffolds were verified by finite element analysis (FEA). The PCL scaffolds were further assembled into AF construct to replicate the angle-ply architecture of AF. The optimal assembling method was confirmed by FEA and mechanical tests. The in vitro experiments showed that the 3D printed AF scaffolds presented favorable biocompatibility and supported the adhesion and growth of AF cells. The in vivo performance of tissue-engineered IVDs (TE-IVDs), which consisted of 3D printed AF scaffold and GelMA hydrogel that simulated nucleus pulposus (NP), were evaluated using a rat total disc replacement model. We found that the implantation of TE-IVDs helped maintain the disc height, reduced the loss of NP water content, and partially restored the biomechanical function of IVD. In addition, the TE-IVDs achieved well integration with adjacent tissues and promoted new tissue formation. In summary, being able to accurately simulate the structural characteristics of native AF, the 3D printed angle-ply AF scaffolds hold potential for future applications in IVD regeneration.
Source: crossref · Quality: baseline

Research context

OpenAlex topics: Spine and Intervertebral Disc Pathology · Medical Imaging and Analysis · Musculoskeletal pain and rehabilitation

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (49)

Show source-provided references
1. Identification of circ-FAM169A sponges miR-583 involved in the regulation of intervertebral disc degeneration10.1016/j.jot.2020.07.007 ↗
2. Gut-disc axis: a cause of intervertebral disc degeneration and low back pain?10.1007/s00586-022-07152-8 ↗
3. Disc degeneration of young low back pain patients: a prospective 30-year follow-up MRI study10.1097/BRS.0000000000003548 ↗
4. Intervertebral disc diseases PART 2: a review of the current diagnostic and treatment strategies for intervertebral disc disease10.3390/ijms21062135 ↗
5. Clinical results and complications of endoscopic lumbar interbody fusion for lumbar degenerative disease: a meta-analysis10.1016/j.wneu.2020.10.033 ↗
6. Proper animal experimental designs for preclinical research of biomaterials for intervertebral disc regeneration10.12336/biomatertransl.2021.02.003 ↗
7. The ultrastructural organization of elastic fibers at the interface of the nucleus and annulus of the intervertebral disk10.1016/j.actbio.2020.07.021 ↗
8. Mechanobiology of annulus fibrosus and nucleus pulposus cells in intervertebral discs10.1007/s00441-019-03136-1 ↗
9. Regulation of differentiation of annulus fibrosus-derived stem cells using heterogeneous electrospun fibrous scaffolds10.1016/j.jot.2020.02.003 ↗
10. Biomimetic nanofibers can construct effective tissue-engineered intervertebral discs for therapeutic implantation10.1039/C7NR03944A ↗
11. Engineering a biomimetic integrated scaffold for intervertebral disc replacement10.1016/j.msec.2018.11.087 ↗
12. Intervertebral disk tissue engineering using biphasic silk composite scaffolds10.1089/ten.tea.2011.0195 ↗
13. Dose-dependent response of tissue-engineered intervertebral discs to dynamic unconfined compressive loading10.1089/ten.tea.2014.0174 ↗
14. Translation of an engineered nanofibrous disc-like angle-ply structure for intervertebral disc replacement in a small animal model10.1016/j.actbio.2014.02.024 ↗
15. Biodegradable electrospun scaffolds for annulus fibrosus tissue engineering: effect of scaffold structure and composition on annulus fibrosus cells in vitro10.1089/ten.TEA.2012.0679 ↗
16. In vitro evaluation of 3D printed polycaprolactone scaffolds with angle-ply architecture for annulus fibrosus tissue engineering10.1093/rb/rbz011 ↗
17. Three-dimensional (3D) printed scaffold and material selection for bone repair10.1016/j.actbio.2018.11.039 ↗
18. Controllable assembly of skeletal muscle-like bundles through 3D bioprinting10.1088/1758-5090/ac3aca ↗
19. An overview of polyester/hydroxyapatite composites for bone tissue repairing10.1016/j.jot.2021.02.005 ↗
20. A 3D-Bioprinted dual growth factor-releasing intervertebral disc scaffold induces nucleus pulposus and annulus fibrosus reconstruction10.1016/j.bioactmat.2020.06.022 ↗
21. Biomaterials for intervertebral disc regeneration: current status and looming challenges10.1002/term.2750 ↗
22. Tissue-engineered intervertebral discs produce new matrix, maintain disc height, and restore biomechanical function to the rodent spine10.1073/pnas.1107094108 ↗
23. Construction of biomimetic artificial intervertebral disc scaffold via 3D printing and electrospinning10.1016/j.msec.2021.112310 ↗
24. Electrospinning and 3D bioprinting for intervertebral disc tissue engineering10.1002/jsp2.1117 ↗
25. Construction of multi-scale vascular chips and modelling of the interaction between tumours and blood vessels10.1039/C9MH01283D ↗
26. Micro/nanofabrication of brittle hydrogels using 3D printed soft ultrafine fiber molds for damage-free demolding10.1088/1758-5090/ab57d8 ↗
27. Mechanisms and modeling of electrohydrodynamic phenomena10.18063/ijb.v5i1.166 ↗
28. Biologically inspired scaffolds for heart valve tissue engineering via melt electrowriting10.1002/smll.201900873 ↗
29. Melt electrowriting allows tailored microstructural and mechanical design of scaffolds to advance functional human myocardial tissue formation10.1002/adfm.201803151 ↗
30. Heterotypic scaffold design orchestrates primary cell organization and phenotypes in cocultured small diameter vascular grafts10.1002/adfm.201905987 ↗
31. A strategy for depositing different types of cells in three dimensions to mimic tubular structures in tissues10.1002/adma.201104589 ↗
32. Ultrafast digital printing toward 4D shape changing materials10.1002/adma.201605390 ↗
33. A strategy for the construction of controlled, three‐dimensional, multilayered, tissue‐like structures10.1002/adfm.201201275 ↗
34. Fiber engagement accounts for geometry-dependent annulus fibrosus mechanics: a multiscale, Structure-Based Finite Element Study10.1016/j.jmbbm.2020.104292 ↗
35. 3D printing of materials with tunable failure via bioinspired mechanical gradients10.1002/adma.201705808 ↗
36. 3D anisotropic photocatalytic architectures as bioactive nerve guidance conduits for peripheral neural regeneration10.1016/j.biomaterials.2020.120108 ↗
37. A novel rabbit model of mild, reproducible disc degeneration by an anulus needle puncture: correlation between the degree of disc injury and radiological and histological appearances of disc degeneration10.1097/01.brs.0000148152.04401.20 ↗
38. A simple disc degeneration model induced by percutaneous needle puncture in the rat tail10.1097/BRS.0b013e31817c64a9 ↗
39. Analytical and finite element analysis of shape memory polymer for use in lumbar total disc replacement10.1016/j.jmbbm.2021.104689 ↗
40. Packaging performance comparison for distribution and export of papaya fruit10.1002/pts.681 ↗
41. A review of the structure–activity relationship of natural and synthetic antimetastatic compounds10.3390/biom10010138 ↗
42. Tissue engineering strategies for intervertebral disc treatment using functional polymers10.3390/polym11050872 ↗
43. 3D printed multi-scale scaffolds with ultrafine fibers for providing excellent biocompatibility10.1016/j.msec.2019.110269 ↗
44. Substrate topography regulates differentiation of annulus fibrosus-derived stem cells via CAV1-YAP-mediated mechanotransduction10.1021/acsbiomaterials.9b01823 ↗
45. Structure-induced cell growth by 3D printing of heterogeneous scaffolds with ultrafine fibers10.1016/j.matdes.2019.108092 ↗
46. Cellular modulation by the mechanical cues from biomaterials for tissue engineering10.12336/biomatertransl.2021.04.001 ↗
47. Self-assembly of aligned tissue-engineered annulus fibrosus and intervertebral disc composite via collagen gel contraction10.1089/ten.tea.2009.0442 ↗
48. Analysis of cell viability in intervertebral disc: effect of endplate permeability on cell population10.1016/j.jbiomech.2010.01.023 ↗
49. Long-term mechanical function and integration of an implanted tissue-engineered intervertebral disc10.1126/scitranslmed.aau0670 ↗