journal article·2020-10-01

Direct-write 3D printing and characterization of a GelMA-based biomaterial for intracorporeal tissue engineering

A Asghari Adib, A Sheikhi, M Shahhosseini, A Simeunović, S Wu, C E Castro, R Zhao, A Khademhosseini, D J Hoelzle

Biofabrication· Volume 12· Issue 4
Publisher page

Abstract

Abstract We develop and characterize a biomaterial formulation and robotic methods tailored for intracorporeal tissue engineering (TE) via direct-write (DW) 3D printing. Intracorporeal TE is defined as the biofabrication of 3D TE scaffolds inside of a living patient, in a minimally invasive manner. A biomaterial for intracorporeal TE requires to be 3D printable and crosslinkable via mechanisms that are safe to native tissues and feasible at physiological temperature (37 °C). The cell-laden biomaterial (bioink) preparation and bioprinting methods must support cell viability. Additionally, the biomaterial and bioprinting method must enable the spatially accurate intracorporeal 3D delivery of the biomaterial, and the biomaterial must adhere to or integrate into the native tissue. Current biomaterial formulations do not meet all the presumed intracorporeal DW TE requirements. We demonstrate that a specific formulation of gelatin methacryloyl (GelMA)/Laponite ® /methylcellulose (GLM) biomaterial system can be 3D printed at physiological temperature and crosslinked using visible light to construct 3D TE scaffolds with clinically relevant dimensions and consistent structures. Cell viability of 71%–77% and consistent mechanical properties over 21 d are reported. Rheological modifiers, Laponite ® and methylcellulose, extend the degradation time of the scaffolds. The DW modality enables the piercing of the soft tissue and over-extrusion of the biomaterial into the tissue, creating a novel interlocking mechanism with soft, hydrated native tissue mimics and animal muscle with a 3.5–4 fold increase in the biomaterial/tissue adhesion strength compared to printing on top of the tissue. The developed GLM biomaterial and robotic interlocking mechanism pave the way towards intracorporeal TE.
Source: crossref · Quality: baseline

Research context

OpenAlex topics: 3D Printing in Biomedical Research · Additive Manufacturing and 3D Printing Technologies · Electrospun Nanofibers in Biomedical Applications

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (81)

Show source-provided references
1. Photocrosslinkable hyaluronan-gelatin hydrogels for two-step bioprinting10.1089/ten.tea.2009.0798 ↗
2. A 3D bioprinting system to produce human-scale tissue constructs with structural integrity10.1038/nbt.3413 ↗
3. Development of a clay based bioink for 3D cell printing for skeletal application10.1088/1758-5090/aa7e96 ↗
4. Rapid 3D printing of anatomically accurate and mechanically heterogeneous aortic valve hydrogel scaffolds10.1088/1758-5082/4/3/035005 ↗
5. Development and characterisation of a new bioink for additive tissue manufacturing10.1039/c3tb21280g ↗
6. Additive manufacturing of tissues and organs10.1016/j.progpolymsci.2011.11.007 ↗
7. The role of bioreactors in tissue engineering10.1016/j.tibtech.2003.12.001 ↗
8. The trend towards in vivo bioprinting10.18063/IJB.2015.01.001 ↗
9. Tissue-engineered autologous bladders for patients needing cystoplasty10.1016/S0140-6736(06)68438-9 ↗
10. Preclinical study of patient-specific cell-free nanofiber tissue-engineered vascular grafts using 3-dimensional printing in a sheep model10.1016/j.jtcvs.2016.10.066 ↗
11. Additive manufacturing for in situ repair of osteochondral defects10.1088/1758-5082/2/3/035004 ↗
12. Robotic-assisted 3D bio-printing for repairing bone and cartilage defects through a minimally invasive approach10.1038/s41598-019-38972-2 ↗
13. Elastic sealants for surgical applications10.1016/j.ejpb.2015.05.022 ↗
14. Engineering a highly elastic human protein–based sealant for surgical applications10.1126/scitranslmed.aai7466 ↗
15. In vitro and in vivo analysis of visible light crosslinkable gelatin methacryloyl (GelMA) hydrogels10.1039/C7BM00110J ↗
16. 3D printing of surgical hernia meshes impregnated with contrast agents: in vitro proof of concept with imaging characteristics on computed tomography10.1186/s41205-018-0037-4 ↗
17. A bioprosthetic ovary created using 3D printed microporous scaffolds restores ovarian function in sterilized mice10.1038/ncomms15261 ↗
18. Bioengineering Strategies to Treat Female Infertility10.1089/ten.teb.2016.0385 ↗
19. Bioinks and bioprinting technologies to make heterogeneous and biomimetic tissue constructs10.1016/j.mtbio.2019.100008 ↗
20. Gelatin as a delivery vehicle for the controlled release of bioactive molecules10.1016/j.jconrel.2005.09.023 ↗
21. Repair and reconstruction of a resected tumor defect using a composite of tissue flap-nanotherapeutic-silk fibroin and chitosan scaffold10.1007/s10439-011-0335-0 ↗
22. A definition of bioinks and their distinction from biomaterial inks10.1088/1758-5090/aaec52 ↗
23. Cytocompatibility of UV and visible light photoinitiating systems on cultured NIH/3T3 fibroblasts in vitro10.1163/156856200743805 ↗
24. Hydrogel membranes with mesh size asymmetry based on the gradient crosslinking of poly(vinyl alcohol)10.1016/S0376-7388(98)00330-5 ↗
25. Novel crosslinking methods to design hydrogels10.1016/S0169-409X(01)00240-X ↗
26. Cytocompatibility studies of an in situ photopolymerized thermoresponsive hydrogel nanoparticle system using human aortic smooth muscle cells10.1002/jbm.a.32194 ↗
27. Structural and rheological properties of methacrylamide modified gelatin hydrogels10.1021/bm990017d ↗
28. Gelatin-methacryloyl hydrogels: towards biofabrication-based tissue repair10.1016/j.tibtech.2016.01.002 ↗
29. Structural analysis of photocrosslinkable methacryloyl-modified protein derivatives10.1016/j.biomaterials.2017.04.050 ↗
30. Transdermal regulation of vascular network bioengineering using a photopolymerizable methacrylated gelatin hydrogel10.1016/j.biomaterials.2013.05.060 ↗
31. Cartilage tissue engineering application of injectable gelatin hydrogel with in situ visible-light-activated gelation capability in both air and aqueous solution10.1089/ten.tea.2013.0642 ↗
32. Engineered contractile skeletal muscle tissue on a microgrooved methacrylated gelatin substrate10.1089/ten.tea.2012.0181 ↗
33. Direct production of human cardiac tissues by pluripotent stem cell encapsulation in gelatin methacryloyl10.1021/acsbiomaterials.6b00226 ↗
34. Engineering microvascular networks in LED light-cured cell-laden hydrogels10.1021/acsbiomaterials.8b00502 ↗
35. New visible-light photoinitiating system for improved print fidelity in gelatin-based bioinks10.1021/acsbiomaterials.6b00149 ↗
36. Proposal to assess printability of bioinks for extrusion-based bioprinting and evaluation of rheological properties governing bioprintability10.1088/1758-5090/aa8dd8 ↗
37. Chhabra · 2008 · 1
38. Synthesis and characterization of types a and b gelatin methacryloyl for bioink applications10.3390/ma9100797 ↗
39. 3D bioprinting of low-concentration cell-laden gelatin methacrylate (GelMA) bioinks with a two-step cross-linking strategy10.1021/acsami.7b16059 ↗
40. Nanocomposite hydrogels for biomedical applications10.1002/bit.25160 ↗
41. Three‐dimensional plotting of a cell‐laden alginate/methylcellulose blend: towards biofabrication of tissue engineering constructs with clinically relevant dimensions10.1002/term.2058 ↗
42. Gelatin-methacrylamide hydrogels as potential biomaterials for fabrication of tissue-engineered cartilage constructs10.1002/mabi.201200471 ↗
43. Bioactive nanoengineered hydrogels for bone tissue engineering: a growth-factor-free approach10.1021/nn507488s ↗
44. Clay: new opportunities for tissue regeneration and biomaterial design10.1002/adma.201301034 ↗
45. Nanoengineered biomimetic hydrogels for guiding human stem cell osteogenesis in three dimensional microenvironments10.1039/C5TB02745D ↗
46. Biodegradable cellulose-based hydrogels: design and applications10.3390/ma2020353 ↗
47. Processing and characterization of chitosan/PVA and methylcellulose porous scaffolds for tissue engineering10.1016/j.msec.2015.12.084 ↗
48. Injectable methylcellulose hydrogel containing silver oxide nanoparticles for burn wound healing10.1016/j.carbpol.2017.11.109 ↗
49. Anon · 2002
50. Physicomechanical Evaluation of Polypropylene, Polyester, and Polytetrafluoroethylene Meshes for Inguinal Hernia Repair10.1016/j.jamcollsurg.2010.09.012 ↗
51. Development and characterization of novel electrospun meshes for hernia repair
52. Cell-laden microengineered gelatin methacrylate hydrogels10.1016/j.biomaterials.2010.03.064 ↗
53. D638-14 · 2014
54. Nanoengineered ionic–covalent entanglement (NICE) bioinks for 3D bioprinting10.1021/acsami.7b19808 ↗
55. Design and manufacture of combinatorial calcium phosphate bone scaffolds10.1115/1.4005173 ↗
56. Boron · 2016
57. Tissue mechanics regulate brain development, homeostasis and disease10.1242/jcs.191742 ↗
58. Computing local thickness of 3d structures with imageJ10.1017/S1431927607074430 ↗
59. F2458-05(2015) · 2015
60. Mechanical characterisation of hydrogel materials10.1179/1743280413Y.0000000022 ↗
61. Gelatin-methacryloyl (GelMA) hydrogels with defined degree of functionalization as a versatile toolkit for 3D cell culture and extrusion bioprinting10.3390/bioengineering5030055 ↗
62. 3D printing of complex GelMA-based scaffolds with nanoclay10.1088/1758-5090/ab0cf6 ↗
63. Effect of ionic strength on shear-thinning nanoclay–polymer composite hydrogels10.1039/C8BM00469B ↗
64. Assessing bioink shape fidelity to aid material development in 3D bioprinting10.1088/1758-5090/aa90e2 ↗
65. The effect of scaffold macroporosity on angiogenesis and cell survival in tissue-engineered smooth muscle10.1016/j.biomaterials.2014.03.025 ↗
66. Determining the porous structure for optimal soft-tissue ingrowth: an in vivo histological study10.1371/journal.pone.0206228 ↗
67. The effect of pore size on tissue ingrowth and neovascularization in porous bioceramics of controlled architecturein vivo10.1088/1748-6041/6/1/015007 ↗
68. Advances in engineering hydrogels10.1126/science.aaf3627 ↗
69. Biomaterial stiffness determines stem cell fate10.1016/j.lfs.2017.04.014 ↗
70. The role of matrix stiffness in regulating cell behavior10.1002/hep.22193 ↗
71. The influence of hydrogel modulus on the proliferation and differentiation of encapsulated neural stem cells10.1016/j.biomaterials.2009.05.050 ↗
72. Impact of hydrogel stiffness on differentiation of human adipose-derived stem cell microspheroids10.1089/ten.tea.2018.0237 ↗
73. Investigating the effect of sterilisation methods on the physical properties and cytocompatibility of methyl cellulose used in combination with alginate for 3D-bioplotting of chondrocytes10.1007/s10856-018-6211-9 ↗
74. Bioink properties before, during and after 3D bioprinting10.1088/1758-5090/8/3/032002 ↗
75. Hydrogels for the repair of articular cartilage defects10.1089/ten.teb.2011.0077 ↗
76. Non‐osmotic hydrogels: a rational strategy for safely degradable hydrogels10.1002/anie.201602610 ↗
77. Methods to assess shear-thinning hydrogels for application as injectable biomaterials10.1021/acsbiomaterials.7b00734 ↗
78. Stiff micelle-crosslinked hyaluronate hydrogels with low swelling for potential cartilage repair10.1039/C9TB01155B ↗
79. Injectable nanoclay gels for angiogenesis10.1016/j.actbio.2019.09.023 ↗
80. 3D bioprinting of a hyaluronan bioink through enzymatic-and visible light-crosslinking10.1088/1758-5090/aadf58 ↗
81. Mesh-fixation method and pain and quality of life after laparoscopic ventral or incisional hernia repair: a randomized trial of three fixation techniques10.1007/s00464-009-0763-1 ↗