Corrosion protection performance of nanocomposite coatings under static, UV, and dynamic conditions
Source abstract
Abstract
Silicone-modified epoxy polymeric matrix was successfully fabricated and reinforced with 1–2 wt% SiO2, TiO2, and TiSiO4 nanoparticles. Fourier-transform infrared spectroscopy, contact angle measurements, differential scanning calorimetry, and field-emission scanning electron microscopy together with energy-dispersive X-ray spectroscopy were employed to investigate different characteristics of the prepared coatings. To simulate operating conditions, all samples were characterized via electrochemical impedance spectroscopy (EIS) after being subjected to different conditions. Corrosion under static conditions, in which the samples were exposed to a static electrolyte without further change in other parameters, was investigated. Furthermore, to study the effects of ultraviolet (UV) radiation in accelerating the degradation of the coatings, samples were characterized after being subjected to UV while immersed statically in the electrolyte. Additionally, the corrosion protection performance was investigated after subjecting the coated substrates to dynamic conditions involving continuous movement of the sample in the electrolyte, simulating continuous wear of the coated surfaces. Compared with the static condition, the EIS results revealed the vital role of the silicone resin and nanoparticles in improving the stability of the coating film against corrosion degradation in the presence of UV radiation, while poor performance in dynamic condition was recorded for all the coating systems.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Corrosion Behavior and Inhibition · Material Properties and Applications · Surface Modification and Superhydrophobicity
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (37)
Show source-provided references
1. Revie, RW, Corrosion and Corrosion Control. Wiley, New York, 200810.1002/9780470277270 ↗
2. Mat Nor, N, Ismail, L, Jamari, S, Ramesh, K, Vengadaesvaran, B, Arof, A, “Electrochemical Impedance Spectroscopy Study of CuO and Cu Coating Systems.” Pigment Resin Technol., 43 (6) 371–378 (2014)10.1108/PRT-02-2014-0014 ↗
3. Davis, JR, Corrosion: Understanding the Basics. ASM International, Materials Park, 200010.31399/asm.tb.cub.9781627082501 ↗
4. Ikechukwu, EE, Pauline, EO, “Environmental Impacts of Corrosion on the Physical Properties of Copper and Aluminium: A Case Study of the Surrounding Water Bodies in Port Harcourt.” Open J. Soc. Sci., 3 (02) 143 (2015)
5. Mathiazhagan, A, Joseph, R, “Nanotechnology—A New Prospective in Organic Coating-Review.” Int. J. Chem. Eng. Appl., 2 (4) 225 (2011)
6. Miklečić, J, Blagojević, SL, Petrič, M, Jirouš-Rajković, V, “Influence of TiO2 and ZnO Nanoparticles on Properties of Waterborne Polyacrylate Coating Exposed to Outdoor Conditions.” Prog. Org. Coat., 89 67–74 (2015)10.1016/j.porgcoat.2015.07.016 ↗
7. Ammar, S, Ramesh, K, Vengadaesvaran, B, Ramesh, S, Arof, A, “A Novel Coating Material that Uses Nano-sized SiO2 Particles to Intensify Hydrophobicity and Corrosion Protection Properties.” Electrochim. Acta, 220 417–426 (2016)10.1016/j.electacta.2016.10.099 ↗
8. Ammar, S, Ramesh, K, Azman, NAN, Vengadaesvaran, B, Ramesh, S, Arof, A, “Comparison Studies on the Anticorrosion and Overall Performance of Solvent/Water Based Epoxy-Copper Reinforced Composite Coatings.” Mater. Express, 6 403–413 (2016)10.1166/mex.2016.1330 ↗
9. Stack, M, Chacon-Nava, J, Stott, F, “Relationship Between the Effects of Velocity and Alloy Corrosion Resistance in Erosion–Corrosion Environments at Elevated Temperatures.” Wear, 180 (1) 91–99 (1995)10.1016/0043-1648(94)06536-5 ↗
10. Borenstein, S, Microbiologically Influenced Corrosion Handbook. Elsevier, Amsterdam, 199410.1533/9781845698621 ↗
11. Vasyliev, GS, “The Influence of Flow Rate on Corrosion of Mild Steel in Hot Tap Water.” Corros. Sci., 98 33–39 (2015)10.1016/j.corsci.2015.05.007 ↗
12. Hang, TTX, Dung, NT, Truc, TA, Duong, NT, Van Truoc, B, Vu, PG, Hoang, T, Thanh, DTM, Olivier, M-G, “Effect of Silane Modified Nano ZnO on UV Degradation of Polyurethane Coatings.” Prog. Org. Coat., 79 68–74 (2015)10.1016/j.porgcoat.2014.11.008 ↗
13. Asmatulu, R, Mahmud, GA, Hille, C, Misak, HE, “Effects of UV Degradation on Surface Hydrophobicity, Crack, and Thickness of MWCNT-Based Nanocomposite Coatings.” Prog. Org. Coat., 72 (3) 553–561 (2011)10.1016/j.porgcoat.2011.06.015 ↗
14. Amirudin, A, Thieny, D, “Application of Electrochemical Impedance Spectroscopy to Study the Degradation of Polymer-Coated Metals.” Prog. Org. Coat., 26 (1) 1–28 (1995)10.1016/0300-9440(95)00581-1 ↗
15. Nikolic, G, Zlatkovic, S, Cakic, M, Cakic, S, Lacnjevac, C, Rajic, Z, “Fast Fourier Transform IR Characterization of Epoxy GY Systems Crosslinked with Aliphatic and Cycloaliphatic EH Polyamine Adducts.” Sensors, 10 (1) 684–696 (2010)10.3390/s100100684 ↗
16. Cholake, ST, Mada, MR, Raman, RS, Bai, Y, Zhao, X, Rizkalla, S, Bandyopadhyay, S, “Quantitative Analysis of Curing Mechanisms of Epoxy Resin by Mid- and Near-Fourier Transform Infra Red Spectroscopy.” Def. Sci. J., 64 (3) 314 (2014)10.14429/dsj.64.7326 ↗
17. Mustata, F, Bicu, I, “Hydroxyesters of Resin Acids Modified Withoff-Cresol/p-Nonylphenol Formaldehyde Resins.” Polimery, 54 627 (2009)10.14314/polimery.2009.627 ↗
18. Paluvai, NR, Mohanty, S, Nayak, S, “Synthesis and Modifications of Epoxy Resins and Their Composites: A Review.” Polym. Plast. Technol. Eng., 53 1723–1758 (2014)10.1080/03602559.2014.919658 ↗
19. Ammar, S, Ramesh, K, Vengadaesvaran, B, Ramesh, S, Arof, A, “Amelioration of Anticorrosion and Hydrophobic Properties of Epoxy/PDMS Composite Coatings Containing Nano ZnO Particles.” Prog. Org. Coat., 92 54–65 (2016)10.1016/j.porgcoat.2015.12.007 ↗
20. Smith, BC, Infrared Spectral Interpretation: A Systematic Approach. CRC Press, Boca Raton, 1998
21. Rogerio-Candelera, MA, Lazzari, M, Cano, E, Science and Technology for the Conservation of Cultural Heritage. CRC Press, Boca Raton, 201310.1201/b15577 ↗
22. Ammar, S, Ramesh, K, Ma, I, Farah, Z, Vengadaesvaran, B, Ramesh, S, Arof, A, “Studies on SiO2-Hybrid Polymeric Nanocomposite Coatings with Superior Corrosion Protection and Hydrophobicity.” Surf. Coat. Technol., 324 536–545 (2017)10.1016/j.surfcoat.2017.06.014 ↗
23. Ammar, S, Ramesh, K, Vengadaesvaran, B, Ramesh, S, Arof, A, “Formulation and Characterization of Hybrid Polymeric/ZnO Nanocomposite Coatings with Remarkable Anti-corrosion and Hydrophobic Characteristics.” J. Coat. Technol. Res., 13 921–930 (2016)10.1007/s11998-016-9799-z ↗
24. Zhang, D, Wang, L, Qian, H, Li, X, “Superhydrophobic Surfaces for Corrosion Protection: A Review of Recent Progresses and Future Directions.” J. Coat. Technol. Res., 13 (1) 11–29 (2016)10.1007/s11998-015-9744-6 ↗
25. Ogihara, H, Xie, J, Okagaki, J, Saji, T, “Simple Method for Preparing Superhydrophobic Paper: Spray-Deposited Hydrophobic Silica Nanoparticle Coatings Exhibit High Water-Repellency and Transparency.” Langmuir, 28 (10) 4605–4608 (2012)10.1021/la204492q ↗
26. Bravo, J, Zhai, L, Wu, Z, Cohen, RE, Rubner, MF, “Transparent Superhydrophobic Films Based on Silica Nanoparticles.” Langmuir, 23 (13) 7293–7298 (2007)10.1021/la070159q ↗
27. Wang, S, Li, Y, Fei, X, Sun, M, Zhang, C, Li, Y, Yang, Q, Hong, X, “Preparation of a Durable Superhydrophobic Membrane by Electrospinning Poly (Vinylidene Fluoride)(PVDF) Mixed with Epoxy–Siloxane Modified SiO2 Nanoparticles: A Possible Route to Superhydrophobic Surfaces with Low Water Sliding Angle and High Water Contact Angle.” J. Colloid Interface Sci., 359 (2) 380–388 (2011)10.1016/j.jcis.2011.04.004 ↗
28. Ramezanzadeh, B, Attar, M, Farzam, M, “A Study on the Anticorrosion Performance of the Epoxy–Polyamide Nanocomposites Containing ZnO Nanoparticles.” Prog. Org. Coat., 72 (3) 410–422 (2011)10.1016/j.porgcoat.2011.05.014 ↗
29. Seyedmehdi, S, Zhang, H, Zhu, J, “Influence of Production Method, Silicone Type and Thickness on Silicon Rubber Superhydrophobic Coatings.” Prog. Org. Coat., 90 291–295 (2016)10.1016/j.porgcoat.2015.10.024 ↗
30. Ryu, H-Y, Yoon, SH, Han, D-H, Hafeez, H, Paluvai, NR, Lee, CS, Park, J-G, “Fabrication of Hydrophobic/Hydrophilic Switchable Aluminum Surface Using Poly (N-Isopropylacrylamide).” Prog. Org. Coat., 99 295–301 (2016)10.1016/j.porgcoat.2016.06.008 ↗
31. Finšgar, M, Petovar, B, Xhanari, K, Maver, U, “The Corrosion Inhibition of Certain Azoles on Steel in Chloride Media: Electrochemistry and Surface Analysis.” Corros. Sci., 111 370–381 (2016)10.1016/j.corsci.2016.05.028 ↗
32. Liu, W, Xu, Q, Han, J, Chen, X, Min, Y, “A Novel Combination Approach for the Preparation of Superhydrophobic Surface on Copper and the Consequent Corrosion Resistance.” Corros. Sci., 110 105–113 (2016)10.1016/j.corsci.2016.04.015 ↗
33. Yuan, X, Yue, Z, Chen, X, Wen, S, Li, L, Feng, T, “EIS Study of Effective Capacitance and Water Uptake Behaviors of Silicone-Epoxy Hybrid Coatings on Mild Steel.” Prog. Org. Coat., 86 41–48 (2015)10.1016/j.porgcoat.2015.04.004 ↗
34. Mostafaei, A, Nasirpouri, F, “Epoxy/Polyaniline–ZnO Nanorods Hybrid Nanocomposite Coatings: Synthesis, Characterization and Corrosion Protection Performance of Conducting Paints.” Prog. Org. Coat., 77 (1) 146–159 (2014)10.1016/j.porgcoat.2013.08.015 ↗
35. Mahdi, E, Rauf, A, Eltai, E, “Effect of Temperature and Erosion on Pitting Corrosion of X100 Steel in Aqueous Silica Slurries Containing Bicarbonate and Chloride Content.” Corros. Sci., 83 48–58 (2014)10.1016/j.corsci.2014.01.021 ↗
36. Wang, Y, Xing, Z, Luo, Q, Rahman, A, Jiao, J, Qu, S, Zheng, Y, Shen, J, “Corrosion and Erosion–Corrosion Behaviour of Activated Combustion High-Velocity Air Fuel Sprayed Fe-Based Amorphous Coatings in Chloride-Containing Solutions.” Corros. Sci., 98 339–353 (2015)10.1016/j.corsci.2015.05.044 ↗
37. Wood, RJ, “Erosion–Corrosion Interactions and Their Effect on Marine and Offshore Materials.” Wear, 261 (9) 1012–1023 (2006)10.1016/j.wear.2006.03.033 ↗