Thermodynamic consideration on selective surface oxidation of high strength steels prior to hot-dip galvanizing
Source abstract
Abstract
The galvanizability of high strength steel is dependent on the surface selective oxidation of alloy elements during intercritical annealing. First, this study reviewed the selective oxidation of Mn, Si, Al, Cr, and their possible products. Then we applied three sets of elemental activity data, i.e., calculated from Thermo-Calc, molar fraction, and a M (M = Mn, Si, Al, Cr) = 1 to calculate the equilibrium oxygen partial pressure of each oxidation reaction. It was found that there is a significant deviation among the results calculated from different data. Finally, this study established the stabilities and precipitation sequences of Mn–Si, Mn–Al and Mn–Cr mixed oxides, and proposed a new Mn–Cr rule to predict the oxides formed on the surface of Mn–Cr steel.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Corrosion Behavior and Inhibition · High-Temperature Coating Behaviors · Hydrogen embrittlement and corrosion behaviors in metals
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (37)
Show source-provided references
1. Olefjord, I, Leijon, W, Jelvestam, U, “Selective Surface Oxidation During Annealing of Steel Sheets in H2 and N2.” Appl. Surf. Sci., 6 (3–4) 241–255 (1980). doi: 10.1016/0378-5963(80)90015-X10.1016/0378-5963(80)90015-X ↗
2. Mahieu, J, Claessens, S, De Cooman, BC, et al., “Surface and Sub-Surface Characterization of Si-, Al-and P-Alloyed TRIP-Aided Steel.” Galvatech ’04 6th International Conference on Zinc and Zinc Alloy Coated Sheet Steels, Chicago, IL. USA, 2004, pp. 529–538
3. Wagner, C, “Reaction Types in the Oxidation of Alloys.” Z. Elektrochem., 63 772–782 (1959)
4. Suzuki, Y, Yamashita, T, Sugimoto, Y, et al., “Thermodynamic Analysis of Selective Oxidation Behavior of Si and Mn-Added Steel During Recrystallization Annealing.” ISIJ Int., 49 (4) 564–573 (2009). doi: 10.2355/isijinternational.49.56410.2355/isijinternational.49.564 ↗
5. Liu, H, He, Y, Li, L, “Application of Thermodynamics and Wagner Model on Two Problems in Continuous Hot-Dip Galvanizing.” Appl. Surf. Sci., 256 (5) 1399–1403 (2009). doi: 10.1016/j.apsusc.2009.08.09510.1016/j.apsusc.2009.08.095 ↗
6. Machlin, ES, An Introduction to Aspects of Thermodynamics and Kinetics Relevant to Materials Science, 3rd ed. Elsevier Science Ltd, Oxford (2007)
7. Eynde, XV, Servais, JP, Lamberigts, M, “Surface Oxide Maturation and Self-Reduction: A New Process to Ensure TRIP Steel Hot Dip Galvanizing.” Galvatech ’04: 6th International Conference on Zinc and Zinc Alloy Coated Steel Sheet—Conference Proceedings, Chicago, IL, 2004, pp. 361–372
8. Frenznick, S, Stratmann, M, Rohwerder, M, “Galvanizing of Defined Model Samples: On the Road to a Fundamental Physical Understanding of Hot-Dip Galvanizing.” Galvatech ’04: 6th International Conference on Zinc and Zinc Alloy Coated Steel Sheet, Chicago, IL, USA, Apr 4–7, 2004, pp. 411–417
9. Birks, N, Meier, GH, Pettit, FS, Introduction to the High-Temperature Oxidation of Metals, 2nd ed. Cambridge University Press, Cambridge (2006)10.1017/CBO9781139163903 ↗
10. Swaminathan, S, “Selective Surface Oxidation and Segregation Upon Short Term Annealing of Model Alloys and Industrial Steel Grades.” Ph.D. thesis, Ruhr-Universitat Bochum, 2007
11. Paraezanovic, I, “Selective Oxidation and Segregation in Commercial Steels and Model Alloys.” Ph.D. thesis, RWTH Aachen, 2006
12. Parezanovic, I, Spiegel, M, “Influence of Dew Point on the Selective Oxidation of Cold Rolled DP and IF-Steels.” J. Corros. Sci. Eng., 6 (Ho32) 1–16 (2003)
13. Bellhouse, EM, Mertens, AIM, McDermid, JR, “Development of the Surface Structure of TRIP Steels Prior to Hot-Dip Galvanizing.” Mater. Sci. Eng. A, 463 147–156 (2007). doi: 10.1016/j.msea.2006.09.11710.1016/j.msea.2006.09.117 ↗
14. Bellhouse, EM, McDermid, JR, “Analysis of the Fe–Zn Interface of Galvanized High Al-Low Si TRIP Steels.” Mater. Sci. Eng. A, 491 (1–2) 39–46 (2008). doi: 10.1016/j.msea.2007.12.03310.1016/j.msea.2007.12.033 ↗
15. Oren, EC, Goodwin, FE, “Hot-Dip Galvanizing of Advanced High-Strength Steel Grades.” Galvatech ’04: 6th International Conference on Zinc and Zinc Alloy Coated Steel Sheet, Chicago, IL, USA, Apr 4–7 2004, pp. 737–749
16. Drillet, P, Zermout, Z, Bouleau, D, et al., “Selective Oxidation of high Si, Mn and Al steel grade during Recrystallization Annealing, and Steel/Zn Reactivity.” Galvatech ’04: 6th International Conference on Zinc and Zinc Alloy Coated Steel Sheet—Conference Proceedings, Chicago, IL, 2004, pp. 1123–1134
17. Lamberigts, M, Servais, JP, “Use of XPS to Investigate Surface Problems in ULC Deep Drawing Steels.” Appl. Surf. Sci., 144–145 334–338 (1999). doi: 10.1016/S0169-4332(98)00822-810.1016/S0169-4332(98)00822-8 ↗
18. Schuhmacher, B, Heller, T, Steinhorst, M, et al., “Recent Development of High Strength Steels with Zinc or Zinc Alloy Coating in Europe.” Galvatech ’07-7th International Conference on Zinc and Zinc Alloy Coated Steel Sheet, Osaka, Japan, 2007, pp. 397–402
19. De Putte, TV, Zermout, Z, Loison, D, et al., “Selective Oxidation During the Austenitic Annealing of a CMnSi Steel.” Adv. Mater. Res., 15–17 129–134 (2007). doi: 10.4028/www.scientific.net/AMR.15-17.12910.4028/www.scientific.net/AMR.15-17.129 ↗
20. Gong, YF, Kim, HS, De Cooman, BC, “Formation of Surface and Subsurface Oxides during Ferritic, Intercritical and Austenitic Annealing of CMnSi TRIP Steel.” ISIJ Int., 48 (12) 1745–1751 (2008). doi: 10.2355/isijinternational.48.174510.2355/isijinternational.48.1745 ↗
21. Cvijovic, I, Parezanovic, I, Spiegel, M, “Influence of H2–N2 Atmosphere Composition and Annealing Duration on the Selective Surface Oxidation of Low-Carbon Steels.” Corros. Sci., 48 (4) 980–993 (2006). doi: 10.1016/j.corsci.2005.02.02210.1016/j.corsci.2005.02.022 ↗
22. Isobe, M, Kato, C, Mochizuki, K, “Effect of Additional Annealing on Hot-Dip Galvanizability of Si and Mn Added IF-Steel.” 39th MWSP Conference, Warrendale, PA, 1998, pp. 121–125
23. Maki, J, Mahieu, J, De Cooman, BC, et al., “Galvanisability of Silicon Free CMnSi TRIP steels.” Mater. Sci. Technol., 19 125–131 (2003). doi: 10.1179/02670830322500930010.1179/026708303225009300 ↗
24. Kim, Y, Shin, M, Tang, C, et al., “Wettability of Mn x Si y O z by Liquid Zn–Al.” Alloys Metall. Mater. Trans. B, 41 872–875 (2010). doi: 10.1007/s11663-010-9366-410.1007/s11663-010-9366-4 ↗
25. Gong, YF, Song, TJ, Kim, HS, et al., “Development of Continuous Galvanization-compatible Martensitic Steel.” The Asia-Pacific Galvanizing Conference, Lotte Hotel Jeju, Korea, 2009
26. Li, XS, Baek, S-I, Oh, C-S, et al., “Dew-Point Controlled Oxidation of Fe–C–Mn–Al–Si–Cu Transformation-Induced Plasticity-Aided Steels.” Scripta Mater., 59 (3) 290–293 (2008). doi: 10.1016/j.scriptamat.2008.03.02510.1016/j.scriptamat.2008.03.025 ↗
27. Jung, I-H, Paliwal, M, Kim, Y-M, et al., “Thermodynamic Analysis of the Oxidation of High-Strength Steels.” The Asia-Pacific Galvanizing Conference, Lotte Hotel Jeju, Korea, 2009
28. Liu, H, Shi, W, He, Y, et al., “The Effect of Alloy Elements on Selective Oxidation and Galvanisability of TRIP-Aided Steel.” Surf. Interf. Anal., 42 1685–1689 (2010). doi: 10.1002/sia.336810.1002/sia.3368 ↗
29. Saeki, I, Saito, T, Furuichi, R, et al., “Growth Process of Protective Oxides Formed on Type 304 and 430 Stainless Steels at 1273 K.” Corros. Sci., 40 (8) 1295–1302 (1998). doi: 10.1016/S0010-938X(97)00146-710.1016/S0010-938X(97)00146-7 ↗
30. Wilson, PR, Chen, Z, “Identification of Surface Precipitates Found on the Surface of Steel Annealed for Tinplating.” Microsc. Microanal., 11 (Suppl. S02) 1990–1991 (2005). doi: 10.1017/S1431927605502952
31. Swaminathan, S, Spiegel, M, “Effect of Alloy Composition on the Selective Oxidation of Ternary Fe–Si–Cr, Fe–Mn–Cr Model Alloys.” Surf. Interf. Anal., 40 (3–4) 268–272 (2008). doi: 10.1002/sia.273210.1002/sia.2732 ↗
32. Turkdogan, ET, Physical Chemistry of High Temperature Technology. Academic Press, New York (1980)
33. Kubaschewski, O, Alcock, CB, Metallurgical Thermochemistry, 5th ed. Pergamon Press, Oxford, UK (1979)
34. Holcomb, G, Alman, D, “Effect of Manganese Addition on Reactive Evaporation of Chromium in Ni–Cr Alloys.” J. Mater. Eng. Perform., 15 (4) 394–398 (2006). doi: 10.1361/105994906X11717010.1361/105994906X117170 ↗
35. Swaminathan, S, Spiegel, M, “Thermodynamic and Kinetic Aspects on the Selective Surface Oxidation of Binary, Ternary and Quarternary Model Alloys.” Appl. Surf. Sci., 253 4607–4619 (2007). doi: 10.1016/j.apsusc.2006.10.03110.1016/j.apsusc.2006.10.031 ↗
36. Drillet, P, Zermout, Z, Bouleau, D, et al., “Selective Oxidation of IFTi Stabilized Steels During Recrystallization Annealing, and Steel/Zn Reactivity.” Galvatech’01: 5th International Conference on Zinc and Zinc Alloy Coated Steel Sheet, Brussel, 2001, pp. 195–202
37. Gong, YF, Kim, HS, De Cooman, BC, “Internal Oxidation During Intercritical Annealing of CMnSi Trip Steel.” ISIJ Int., 49 557–563 (2009). doi: 10.2355/isijinternational.49.55710.2355/isijinternational.49.557 ↗