Binder-free conductive graphite coatings on polyimide substrates for applications in flexible electronics
Bibliographic record
Abstract
No abstract is available for this record. The assistant can identify its topic from the title, but cannot infer the study’s results.
Source: Not provided · Quality: missing
Research context
OpenAlex topics: Advanced Sensor and Energy Harvesting Materials · Conducting polymers and applications · Nanomaterials and Printing Technologies
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (63)
Show source-provided references
1. Corzo, D, Tostado-Blázquez, G, Baran, D, “Flexible Electronics: Status, Challenges and Opportunities.” J. Front Electron, 1 (September) 1–13 https://doi.org/10.3389/felec.2020.594003 (2020)10.3389/felec.2020.594003 ↗
2. Wang, Z, Sun, L, Ni, Y, Liu, L, Xu, W, “Flexible Electronics and Healthcare Applications.” J. Front. Nanotechnol., 3 (March) 1–16 https://doi.org/10.3389/fnano.2021.625989 (2021)10.3389/fnano.2021.625989 ↗
3. Wang, P, Hu, M, Wang, H, Chen, Z, Feng, Y, Wang, J, et al., “The Evolution of Flexible Electronics: From Nature, Beyond Nature, and To Nature.” J. Adv. Sci., 7 (20) 1–29 https://doi.org/10.1002/advs.202001116 (2020)10.1002/advs.202001116 ↗
4. Gao, W, Ota, H, Kiriya, D, Takei, K, Javey, A, “Flexible Electronics toward Wearable Sensing.” J. Acc. Chem. Res., 52 (3) 523–33 https://doi.org/10.1021/acs.accounts.8b00500 (2019)10.1021/acs.accounts.8b00500 ↗
5. Scandurra, G, Arena, A, Ciofi, C, “A Brief Review on Flexible Electronics for IoT: Solutions for Sustainability and New Perspectives for Designers.” J. Sensors, 23 (11) https://doi.org/10.3390/s23115264 (2023)10.3390/s23115264 ↗
6. Lutz Sommer, “Printed electronics market- Is its growth potential becoming a threat to current suppliers.” J. World J. Adv. Res. Rev. 15 (3) 228–39 (2022)10.30574/wjarr.2022.15.3.0914 ↗
7. Hou, W, Liao, Q, Xie, S, Song, Y, “Prospects and Challenges of Flexible Stretchable Electrodes for Electronics.” 1–27
8. Khan, S, Lorenzelli, L, Dahiya, RS, “Technologies for printing sensors and electronics over large flexible substrates: A review.” J. IEEE Sens. J., 15 (6) 3164–85 https://doi.org/10.1109/JSEN.2014.2375203 (2015)10.1109/JSEN.2014.2375203 ↗
9. Sanchez-Duenas, L, Gomez, E, Larrañaga, M, Blanco, M, Goitandia, AM, Aranzabe, E, et al., “A Review on Sustainable Inks for Printed Electronics: Materials for Conductive, Dielectric and Piezoelectric Sustainable Inks.” J. Mater. (Basel) 16 (11) https://doi.org/10.3390/ma16113940 (2023)10.3390/ma16113940 ↗
10. Shrivas, K, Ghosale, A, Bajpai, PK, Kant, T, Dewangan, K, Shankar, R, “Advances in flexible electronics and electrochemical sensors using conducting nanomaterials: A review.” J. Microchem. J., 156 (May) 104944 https://doi.org/10.1016/j.microc.2020.104944 (2020)10.1016/j.microc.2020.104944 ↗
11. Li, D, Lai, WY, Zhang, YZ, Huang, W, “Printable Transparent Conductive Films for Flexible Electronics.” J. Adv. Mater., 30 (10) 1–24 https://doi.org/10.1002/adma.201704738 (2018)10.1002/adma.201704738 ↗
12. Angelopoulos, M, “Conducting polymers in microelectronics Conjugated polymers in the nondoped and.” J. Curr., 45 (1) 57–7510.1147/rd.451.0057 ↗
13. Capasso, A, Del Rio Castillo, AE, Sun, H, Ansaldo, A, Pellegrini, V, Bonaccorso, F, “Ink-jet printing of graphene for flexible electronics: An environmentally-friendly approach.” J. Solid State Commun., 224 53–63 https://doi.org/10.1016/j.ssc.2015.08.011 (2015)10.1016/j.ssc.2015.08.011 ↗
14. Konios, D, Stylianakis, MM, Stratakis, E, Kymakis, E, “Dispersion behaviour of graphene oxide and reduced graphene oxide.” J. J. Colloid Interface Sci., 430 108–12 https://doi.org/10.1016/j.jcis.2014.05.033 (2014)10.1016/j.jcis.2014.05.033 ↗
15. Htwe, YZN, Abdullah, MK, Mariatti, M, “Water-based graphene/AgNPs hybrid conductive inks for flexible electronic applications.” J. J. Mater. Res. Technol., 16 59–73 https://doi.org/10.1016/j.jmrt.2021.11.159 (2022)10.1016/j.jmrt.2021.11.159 ↗
16. Htwe, YZN, Mariatti, M, “Surfactant-assisted water-based graphene conductive inks for flexible electronic applications.” J. J. Taiwan Inst. Chem. Eng., 125 402–12 https://doi.org/10.1016/j.jtice.2021.06.022 (2021)10.1016/j.jtice.2021.06.022 ↗
17. Htwe, YZN, Abdullah, MK, Mariatti, M, “Optimization of graphene conductive ink using solvent exchange techniques for flexible electronics applications.” J. Synth. Met., 274 (January) 116719 https://doi.org/10.1016/j.synthmet.2021.116719 (2021)10.1016/j.synthmet.2021.116719 ↗
18. Zhuo, L, Liu, W, Zhao, Z, Yin, E, Li, C, Zhou, L, et al., “Cost-effective silver nano-ink for inkjet printing in application of flexible electronic devices.” J. Chem. Phys. Lett., 757 (June) 137904 https://doi.org/10.1016/j.cplett.2020.137904 (2020)10.1016/j.cplett.2020.137904 ↗
19. Zhao, Q, Wang, W, Shao, J, Li, X, Tian, H, Liu, L, et al., “Nanoscale Electrodes for Flexible Electronics by Swelling Controlled Cracking.” J. Adv. Mater., 28 (30) 6337–44 https://doi.org/10.1002/adma.201601007 (2016)10.1002/adma.201601007 ↗
20. Zhang, M, Li, G, Huang, L, Ran, P, Huang, J, Yu, M, et al., “Versatile fabrication of liquid metal nano-ink based flexible electronic devices.” J. Appl. Mater. Today, 22 100903 https://doi.org/10.1016/j.apmt.2020.100903 (2021)10.1016/j.apmt.2020.100903 ↗
21. Liu, L, Shen, Z, Zhang, X, Ma, H, “Highly conductive graphene/carbon black screen printing inks for flexible electronics.” J. J. Colloid Interface Sci., 582 12–21 https://doi.org/10.1016/j.jcis.2020.07.106 (2021)10.1016/j.jcis.2020.07.106 ↗
22. Rezaga, BFY, Balela, MDL, “Chemical sintering of Ag nanoparticle conductive inks at room temperature for printable electronics.” J. J. Mater. Sci. Mater. Electron., 32 (13) 17764–79 https://doi.org/10.1007/s10854-021-06313-7 (2021)10.1007/s10854-021-06313-7 ↗
23. Choi, Y, Seong, K dong, Piao, Y, “Metal−Organic Decomposition Ink for Printed Electronics.” J. Adv. Mater. Interfaces, 6 (20) 1–14 https://doi.org/10.1002/admi.201901002 (2019)10.1002/admi.201901002 ↗
24. Arapov, K, Bex, G, Hendriks, R, Rubingh, E, Abbel, R, de With, G, et al., “Conductivity Enhancement of Binder-Based Graphene Inks by Photonic Annealing and Subsequent Compression Rolling.” J. Adv. Eng. Mater., 18 (7) 1234–9 https://doi.org/10.1002/adem.201500646 (2016)10.1002/adem.201500646 ↗
25. Hatala, M, Gemeiner, P, Hvojnik, M, Mikula, M, “The effect of the ink composition on the performance of carbon-based conductive screen printing inks.” J. J. Mater. Sci. Mater. Electron., 30 (2) 1034–44 https://doi.org/10.1007/s10854-018-0372-7 (2019)10.1007/s10854-018-0372-7 ↗
26. Zappi, D, Varani, G, Cozzoni, E, Iatsunskyi, I, Laschi, S, Giardi, MT, “Innovative eco-friendly conductive ink based on carbonized lignin for the production of flexible and stretchable bio-sensors.” J. Nanomater., 11 (12) https://doi.org/10.3390/nano11123428 (2021)10.3390/nano11123428 ↗
27. Abdolmaleki, H, Kidmose, P, Agarwala, S, “Droplet-Based Techniques for Printing of Functional Inks for Flexible Physical Sensors.” J. Adv. Mater., 33 (20) 1–29 https://doi.org/10.1002/adma.202006792 (2021)10.1002/adma.202006792 ↗
28. Sundriyal, P, Bhattacharya, S, “Inkjet-Printed Sensors on Flexible Substrates.” J. Energy, Environ. Sustain., (February 2019) 89–113 https://doi.org/10.1007/978-981-10-7751-7_5 (2018)10.1007/978-981-10-7751-7_5 ↗
29. Nathan, A, Ahnood, A, Cole, MT, Lee, S, Suzuki, Y, Hiralal, P, et al., “Flexible electronics: The next ubiquitous platform.” J. Proc. IEEE, 100 (SPL CONTENT) 1486–517 https://doi.org/10.1109/JPROC.2012.2190168 (2012)10.1109/JPROC.2012.2190168 ↗
30. Koo, M, Park, K Il, Lee, SH, Suh, M, Jeon, DY, Choi, JW, et al., “Bendable inorganic thin-film battery for fully flexible electronic systems.” J. Nano Lett., 12 (9) 4810–6 https://doi.org/10.1021/nl302254v (2012)10.1021/nl302254v ↗
31. Yakimets, I, MacKerron, D, Giesen, P, Kilmartin, KJ, Goorhuis, M, Meinders, E, et al., “Polymer substrates for flexible electronics: Achievements and challenges.” J. Adv. Mater. Res., 93–94 5–8 https://doi.org/10.4028/www.scientific.net/AMR.93-94.5 (2010)10.4028/www.scientific.net/AMR.93-94.5 ↗
32. Ling, H, Liu, S, Zheng, Z, Yan, F, “Organic Flexible Electronics.” J. Small Methods, 2 (10) 1–33 https://doi.org/10.1002/smtd.201800070 (2018)10.1002/smtd.201800070 ↗
33. Kamyshny, A, Magdassi, S, “Conductive nanomaterials for 2D and 3D printed flexible electronics.” J. Chem. Soc. Rev., 48 (6) 1712–40 https://doi.org/10.1039/c8cs00738a (2019)10.1039/c8cs00738a ↗
34. Beedasy, V, Smith, PJ, “Printed electronics as prepared by inkjet printing.” J. Mater. (Basel), 13 (3) 1–23 https://doi.org/10.3390/ma13030704 (2020)10.3390/ma13030704 ↗
35. Khan, MUA, Raad, R, Tubbal, F, Theoharis, PI, Liu, S, Foroughi, J, “Bending analysis of polymer-based flexible antennas for wearable, general iot applications: A review.” J. Polymers (Basel), 13 (3) 1–34 https://doi.org/10.3390/polym13030357 (2021)10.3390/polym13030357 ↗
36. Lu, L, Yang, B, Liu, J, “Flexible multifunctional graphite nanosheet/electrospun-polyamide 66 nanocomposite sensor for ECG, strain, temperature and gas measurements.” J. Chem. Eng. J., 400 (June) 125928 https://doi.org/10.1016/j.cej.2020.125928 (2020)10.1016/j.cej.2020.125928 ↗
37. Chung, DDL, “Review: Graphite.” J. J. Mater. Sci., 37 (8) 1475–89 https://doi.org/10.1023/A:1014915307738 (2002)10.1023/A:1014915307738 ↗
38. J.-C. Charlier, X. Gonze, J-PM, “Graphite Interplanar Bonding: Electronic Delocalization.” J. Europhys. Lett., 28 (6) 403–810.1209/0295-5075/28/6/005 ↗
39. Yadav, S, Kaur, I, “Low temperature processed graphene thin film transparent electrodes for supercapacitor applications.” J. RSC Adv., 6 (82) 78702–13 https://doi.org/10.1039/c6ra17668b (2016)10.1039/c6ra17668b ↗
40. Hussein, RN, Schlingman, K, Noade, C, Carmichael, RS, Carmichael, TB, “Shellac-paper composite as a green substrate for printed electronics.” J. Flex Print Electron., 7 (4) https://doi.org/10.1088/2058-8585/ac9f54 (2022)10.1088/2058-8585/ac9f54 ↗
41. Ersu, G, Kuriakose, S, Goldie, SJ, Al-Enizi, AM, Nafady, A, Munuera, C, et al., “Improving the conductivity of graphite-based films by rapid laser annealing.” J. Nanoscale Adv., 4 (22) 4724–9 https://doi.org/10.1039/d2na00557c (2022)10.1039/d2na00557c ↗
42. Van Hazendonk, LS, Pinto, AM, Arapov, K, Pillai, N, Beurskens, MRC, Teunissen, JP, et al., “Printed Stretchable Graphene Conductors for Wearable Technology.” J. Chem. Mater., 34 (17) 8031–42 https://doi.org/10.1021/acs.chemmater.2c02007 (2022)10.1021/acs.chemmater.2c02007 ↗
43. Electronics, P, “thermoelectric touch sensors based on ethyl cellulose and graphite flakes inks OPEN ACCESS sensors based on ethyl cellulose and graphite flakes inks”
44. Montanino, M, De Girolamo Del Mauro, A, Paoletti, C, Sico, G, “Gravure Printing of Graphite-Based Anodes for Lithium-Ion Printed Batteries.” J. Membranes (Basel), 12 (10) 1–7 https://doi.org/10.3390/membranes12100999 (2022)10.3390/membranes12100999 ↗
45. Brishty, FP, Urner, R, Grau, G, “Machine learning based data driven inkjet printed electronics: Jetting prediction for novel inks.” J. Flex Print Electron., 7 (1) https://doi.org/10.1088/2058-8585/ac5a39 (2022)10.1088/2058-8585/ac5a39 ↗
46. Lan, Z, Lee, M-H, Zhu, F, “Recent Advances in Solution‐Processable Organic Photodetectors and Applications in Flexible Electronics.” J. Adv. Intell. Syst., 4 (3) 2100167 https://doi.org/10.1002/aisy.202100167 (2022)10.1002/aisy.202100167 ↗
47. Tiara, AM, Moon, H, Cho, G, Lee, J, “Fully roll-to-roll gravure printed electronics: Challenges and the way to integrating logic gates.” J. Jpn. J. Appl. Phys., 61 (SE) https://doi.org/10.35848/1347-4065/ac575e (2022)10.35848/1347-4065/ac575e ↗
48. Pedico, A, Baudino, L, Aixalà-Perelló, A, Lamberti, A, “Green Methods for the Fabrication of Graphene Oxide Membranes: From Graphite to Membranes.” J. Membranes (Basel), 13 (4) https://doi.org/10.3390/membranes13040429 (2023)10.3390/membranes13040429 ↗
49. Khan, Y, Thielens, A, Muin, S, Ting, J, Baumbauer, C, Arias, AC, “A New Frontier of Printed Electronics: Flexible Hybrid Electronics.” J. Adv. Mater., 32 (15) 1–29 https://doi.org/10.1002/adma.201905279 (2020)10.1002/adma.201905279 ↗
50. ASTM International, “Standard Test Method for Film Hardness by Pencil Test 1.” J. ASTM D3363–05 Stand 05 (Reapproved 2011) 5–7.
51. ASTM International, “ASTM D3359/D3359M-17: Standard Test Methods for Measuring Adhesion by Tape Test.” J. ASTM Int 1–9., https://doi.org/10.1520/D3359-17. (2017)10.1520/D3359-17 ↗
52. Cai, DK, Neyer, A, “Polysiloxane based flexible electrical-optical-circuits-board.” J. Microelectron. Eng., 87 (11) 2268–74 https://doi.org/10.1016/j.mee.2010.02.014 (2010)10.1016/j.mee.2010.02.014 ↗
53. Gangwar, K, Gupta, D, Anand, PI, “Parametric Investigation on laser annealing of polyimide on improving the characteristics of NiTi SMA-based bimorph towards the development of microactuators.” J. Sensors Actuators A Phys., 360 (July) 114536 https://doi.org/10.1016/j.sna.2023.114536 (2023)10.1016/j.sna.2023.114536 ↗
54. Liu, J, Zhang, Q, Zhang, B, Yu, M, “The bonding mechanism of the micro-interface of polymer coated steel.” J. Polymers (Basel), 12 (12) 1–18 https://doi.org/10.3390/polym12123052 (2020)10.3390/polym12123052 ↗
55. Zhang, J, Ahmadi, M, Fargas, G, Perinka, N, Reguera, J, Lanceros-Méndez, S, et al., “Silver Nanoparticles for Conductive Inks: From Synthesis and Ink Formulation to Their Use in Printing Technologies.” J. Metals (Basel), 12 (2) https://doi.org/10.3390/met12020234 (2022)10.3390/met12020234 ↗
56. Qin, Y, Ouyang, X, Lv, Y, Liu, W, Liu, Q, Wang, S, “A Review of Carbon-Based Conductive Inks and Their Printing Technologies for Integrated Circuits.” J. Coat., 13 (10) https://doi.org/10.3390/coatings13101769 (2023)10.3390/coatings13101769 ↗
57. Tymplestr, V, Io in in At Io. p. 1–3
58. Allison, L, “Durable Conductive Inks and SMD Attachment for Robust Printed Electronics”n.d.
59. Yang, W, Wang, C, “Graphene and the related conductive inks for flexible electronics.” J. J. Mater. Chem. C., 4 (30) 7193–207 https://doi.org/10.1039/c6tc01625a (2016)10.1039/c6tc01625a ↗
60. Kralj, M, Krivačić, S, Ivanišević, I, Zubak, M, Supina, A, Marciuš, M, et al., “Conductive Inks Based on Melamine Intercalated Graphene Nanosheets for Inkjet Printed Flexible Electronics.” J. Nanomaterials, 12 (17) https://doi.org/10.3390/nano12172936 (2022)10.3390/nano12172936 ↗
61. Gao, Y, Shi, W, Wang, W, Leng, Y, Zhao, Y, “Inkjet printing patterns of highly conductive pristine graphene on flexible substrates.” J. Ind. Eng. Chem. Res., 53 (43) 16777–84 https://doi.org/10.1021/ie502675z (2014)10.1021/ie502675z ↗
62. Deng, D, Feng, S, Shi, M, Huang, C, “In situ preparation of silver nanoparticles decorated graphene conductive ink for inkjet printing.” J. J. Mater. Sci. Mater. Electron., 28 (20) 15411–7 https://doi.org/10.1007/s10854-017-7427-z (2017)10.1007/s10854-017-7427-z ↗
63. Wang, G, Wang, Z, Liu, Z, Xue, J, Xin, G, Yu, Q, et al., “Annealed graphene sheets decorated with silver nanoparticles for inkjet printing.” J. Chem. Eng. J., 260 582–9 https://doi.org/10.1016/j.cej.2014.09.037 (2015)10.1016/j.cej.2014.09.037 ↗