The effect of MIO pigments on corrosion resistance and adhesion of synthetic rubber-based primer
Source abstract
Abstract
In this research, the corrosion resistance and adhesion property of a synthetic rubber-based primer reinforced with different ratios of micaceous iron oxide (MIO) pigments were studied. Coatings were applied on carbon steel panels and also on steel pipes of 219.1 mm outer diameter. Scanning electron microscopy (SEM) was used to investigate the dispersion of MIO particles in the rubbery matrix. The anticorrosion performance of the coatings was studied, using electrochemical impedance spectroscopy (EIS) and salt spray tests. In addition, the adhesion of primers to carbon steel substrates was evaluated by pull-off test. In order to investigate the effect of MIO particles on the flexibility of the pigmented primers, a cupping test was conducted. The adhesion of cold-applied tape to the formulated primers was assessed by peel adhesion test using hanging mass method. The results indicated that adding 5, 10, and 15 wt% of MIO pigments into the primer improved corrosion resistance of the coatings. An increase in the MIO loading up to 10 wt%, improved the adhesion of the primer to both steel substrate and cold-applied tape.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Corrosion Behavior and Inhibition · Concrete Corrosion and Durability · Hydrogen embrittlement and corrosion behaviors in metals
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (36)
Show source-provided references
1. Khanna, AS, High-Performance Organic Coatings. Elsevier, Amsterdam (2008)10.1533/9781845694739 ↗
2. Kutz, M, Handbook of Environmental Degradation of Materials. William Andrew, Norwich (2005)
3. Romano, M, Dabiri, M, Kehr, A, “The Ins and Outs of Pipeline Coatings: Coatings Used to Protect Oil and Gas Pipelines.” J. Prot. Coat. Linings, 22 (7) 40–47 (2005)
4. Moosavi, AN, “Advances in Field Joint Coatings for Underground Pipelines.” Mater. Perform., 39 (8) 40–44 (2000)
5. Jadoon, A, Thompson, I, “Fusion Bonded Epoxy Mainline and Field Joint Coatings Performance from the X100 Field Trial—A Case Study.” Int. J. Press. Vessels Piping, 92 48–55 (2012)10.1016/j.ijpvp.2012.01.003 ↗
6. Thompson, I, Saithala, JR, “Review of Pipeline Coating Systems from an Operator’s Perspective.” Corros. Eng. Sci. Technol., 51 (2) 118–135 (2016)10.1179/1743278215Y.0000000038 ↗
7. Zhao, J, Hou, Y, Zhao, G, Liu, L, Du, Z, “Failure Analysis of Field Joint Coating (FJC) and Suggestion.” Corrosion Prot., 10 021 (2010)
8. Reeves, CR, Pipeline Rehabilitation Using Field Applied Tape Systems. NACE International, Houston, TX (United States) (1998)
9. Standard, IPS-M-TP-322, Material Standard for Primer to Be Used Hand-Applied Laminated Tape Suitable for Cold Applied Tape Coating System (2012)
10. Association, AWWA C209, Standard for Cold-Applied Tape Coatings for the Exterior of Special Sections, Connections and Fittings for Steel Water Pipelines (1996)
11. Wilmott, M, Highams, J, Ross, R, Kopystinski, A, “Coating and Thermal Insulation of Subsea or Buried Pipelines.” J. Prot. Coat. Linings, 17 (11) 47–54 (2000)
12. Ebnesajjad, S, Handbook of Adhesives and Surface Preparation: Technology, Applications and Manufacturing. William Andrew, Norwich (2010)
13. Standard, “IPS-M-TP-310, Material Standard for Cold-Applied Plastic Tape as Inner Layer Tape for Tape Coating System of Buried Steel Pipes” (2011)
14. Standard, IPS-M-TP-311, “Material Standard for Cold-Applied Laminated Plastic Tape as Outer Layer Tape for Tape Coating System of Buried Steel Pipes” (2011)
15. Zaikin, A, Sofina, SY, Stoyanov, O, “Tape Polymer Materials for Anti-corrosion Insulation of Pipelines.” Polym. Sci. Ser. D, 4 (3) 209–220 (2011)10.1134/S1995421211030208 ↗
16. Naser Kakaei, M, Danaee, I, Zaarei, D, “Evaluation of Cathodic Protection Behavior of Waterborne Inorganic Zinc-Rich Silicates Containing Various Contents of MIO Pigments.” Anti-Corros. Methods Mater., 60 (1) 37–44 (2013)10.1108/00035591311287438 ↗
17. Carter, E, Laundon, R, “Synthetic Micaceous Iron Oxide: A New Anticorrosive Pigmant.” J. Oil Colour Chem. Assoc., 73 (1) 7–15 (1990)
18. Wiktorek, S, Bradley, E, “The Orientation of Micaceous Iron Oxide Particles in Organic Coatings Applied to Edges.” J. Oil Colour Chem. Assoc., 69 (7) 172–177 (1986)
19. Sørensen, PA, Kiil, S, Dam-Johansen, K, Weinell, C, “Anticorrosive Coatings: A Review.” J. Coat. Technol. Res., 6 (2) 135–176 (2009)10.1007/s11998-008-9144-2 ↗
20. Giúdice, CA, Benítez, JC, “Optimising the Corrosion Protective Abilities of Lamellar Micaceous Iron Oxide Containing Primers.” Anti-Corros. Methods Mater., 47 (4) 226–232 (2000)10.1108/00035590010344321 ↗
21. Forsgren, A, Corrosion Control Through Organic Coatings. CRC Press, Boca Raton (2006)10.1201/9781420007022 ↗
22. Al Borno, A, Brown, M, “Testing and Selection of Girth Weld Protective Coatings.” Proc. CORROSION, (2005)
23. Neal, D, “Comparison of Performance of Field Applied Girth Weld Coatings.” Mater. Perform., 36 (1) 20–24 (1997)
24. Zaarei, D, “Polymeric Tapes as Weld Joint Coatings for Buried Pipelines: Compatibility with Mainline Coating.” Sci. Road J. 30 (2014)
25. Standard, ASTM B117-07a, “Standard Test Method for Evaluating Degree of Blistering of Paints” (2009)
26. Standard, ASTM D714-02, “Standard Test Method for Evaluating Degree of Blistering of Paints” (2009)
27. Standard, ASTM D610-08, “Standard Practice for Evaluating Degree of Rusting on Painted Steel Surfaces” (2008)
28. Standard, ASTM D4541-09, “Standard Test Method for Pull-Off Strength of Coatings Using Portable Adhesion Testers” (2009)
29. Standard, CAN/CSA Z245.21-10, “External Fusion Bond Epoxy Coating for Steel Pipe/External Polyethylene Coating For Pipe” (2010)
30. Standard, BS EN ISO 1520, “Paints and Varnishes—Cupping Test”, (2006)
31. Danaee, I, Khomami, MN, Attar, A, “Corrosion of AISI 4130 Steel Alloy Under Hydrodynamic Condition in Ethylene Glycol + Water + NO2—Solution.” J. Mater. Sci. Technol., 29 (1) 89–96 (2013)10.1016/j.jmst.2012.11.013 ↗
32. Zamanizadeh, H, Shishesaz, M, Danaee, I, Zaarei, D, “Investigation of the Corrosion Protection Behavior of Natural Montmorillonite Clay/Bitumen Nanocomposite Coatings.” Prog. Org. Coat., 78 256–260 (2015)10.1016/j.porgcoat.2014.08.011 ↗
33. Gómez-Zamudio, F, Antaño-López, R, Rodríguez-López, A, Perez, T, Larios-Durán, E, “Development of the Electrochemical Impedance Response of Ideally Polarized Interfaces Based on Transport Phenomena Laws Through the Nernst-Planck-Poisson Equation Linearized by the Debye-Falkenhagen Approximation.” Int. J. Electrochem. Sci., 11 475–485 (2016)10.1016/S1452-3981(23)15858-5 ↗
34. Darmiani, E, Danaee, I, Rashed, G, Zaarei, D, “Formulation and Study of Corrosion Prevention Behavior of Epoxy Cerium Nitrate–Montmorillonite Nanocomposite Coated Carbon Steel.” J. Coat. Technol. Res., 10 (4) 493–502 (2013)10.1007/s11998-012-9463-1 ↗
35. Nikravesh, B, Ramezanzadeh, B, Sarabi, A, Kasiriha, S, “Evaluation of the Corrosion Resistance of an Epoxy-Polyamide Coating Containing Different Ratios of Micaceous Iron Oxide/Al Pigments.” Corros. Sci., 53 (4) 1592–1603 (2011)10.1016/j.corsci.2011.01.045 ↗
36. Heidarian, M, Shishesaz, M, Kassiriha, S, Nematollahi, M, “Characterization of Structure and Corrosion Resistivity of Polyurethane/Organoclay Nanocomposite Coatings Prepared Through an Ultrasonication Assisted Process.” Prog. Org. Coat., 68 (3) 180–188 (2010)10.1016/j.porgcoat.2010.02.006 ↗