Incorporation of an acrylic fatty acid derivative as comonomer for oxidative cure in acrylic latex
Source abstract
Abstract
An acrylic fatty acid derivative (AcFAD) was evaluated as comonomer for promotion of oxidative cure in waterborne latexes. AcFAD was polymerized by solvent homopolymerization and copolymerization and by emulsion copolymerization, and the final products characterized. In the two polymerization processes, NMR analyses confirmed that the reaction occurred involving both the terminal acrylic double bond and the conjugated double bonds of the aliphatic chain. Compared with a reference acrylic latex, the results obtained after AcFAD incorporation showed a time-dependent increase in gel content and in solvent resistance of dry films. These were ascribed to oxidative cure and consequent self-crosslinking of the acrylic polymer, involving the conjugated double bonds in AcFAD side chains. Oxidative cure was also confirmed by FTIR analyses. In addition, reduction in minimum film-forming temperature evidenced that AcFAD has an internal plasticization effect during film formation. Incorporation of this comonomer in acrylic paint binder formulations constitutes a promising alternative to the use of volatile coalescing agents.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Advanced Polymer Synthesis and Characterization · Polymer composites and self-healing · Synthetic Organic Chemistry Methods
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (44)
Show source-provided references
1. Directive 2004/42/CE of the European Parliament and of the Council, Official Journal of the European Union, pp. L 143/87–L 143/96 (2004)
2. Turner, GPA, Introduction to Paint Chemistry and Principles of Paint Technology, 3rd ed. Chapman and Hall, London, 1988
3. Lazzari, M, Chiantore, O, “Drying and Oxidative Degradation of Linseed Oil.” Polym. Degrad. Stabil., 65 303–313 (1999)10.1016/S0141-3910(99)00020-8 ↗
4. Christensen, PA, Egerton, TA, Lawson, EJ, “Measurement of Carbon Dioxide Evolution from Alkyd Paints.” J. Mater. Sci., 37 3667–3673 (2002)10.1023/A:1016509208442 ↗
5. Quintero, C, Mendon, SK, Smith, OW, Thames, SF, “Miniemulsion Polymerization of Vegetable Oil Macromonomers.” Prog. Org. Coat., 57 195–201 (2006)10.1016/j.porgcoat.2006.08.011 ↗
6. Pelletier, H, Gandini, A, “Preparation of Acrylated Andurethanated Triacylglycerols.” Eur. J. Lipid Sci. Technol., 108 411–420 (2006)10.1002/ejlt.200501168 ↗
7. Rengasamy, S, Mannari, V, “Development of Soy-Based UV-Curable Acrylate Oligomers and Study of Their Film Properties.” Prog. Org. Coat., 76 78–85 (2013)10.1016/j.porgcoat.2012.08.012 ↗
8. Espinosa, LM, Ronda, JC, Galià, M, Cádiz, V, “A New Route to Acrylate Oils: Crosslinking and Properties of Acrylate Triglycerides from High Oleic Sunflower Oil.” J. Polym. Sci. A, 47 1159–1167 (2009)10.1002/pola.23225 ↗
9. Bunkera, S, Stallerb, C, Willenbacherb, N, Wool, R, “Miniemulsion Polymerization of Acrylated Methyl Oleate for Pressure Sensitive Adhesives.” Int. J. Adhes. Adhes., 23 29–38 (2003)10.1016/S0143-7496(02)00079-9 ↗
10. Cho, H, Park, S, Jegal, J, Song, B, Kim, H, “Preparation and Characterization of Acrylic Polymers Based on a Novel Acrylic Monomer Produced from Vegetable Oils.” J. Appl. Polym. Sci., 116 736–742 (2010)10.1002/app.30211 ↗
11. Xia, Y, Larock, RC, “Vegetable Oil-Based Polymeric Materials: Synthesis, Properties, and Applications.” Green Chem., 12 1893–1909 (2010)10.1039/c0gc00264j ↗
12. Guo, J, Schork, FJ, “Hybrid Miniemulsion Polymerization of Acrylate/Oil and Acrylate/Fatty Acid Systems.” Macromol. React. Eng., 2 265–276 (2008)10.1002/mren.200800004 ↗
13. Thames, SF, Panjnani, KJ, Fruchey, OS, “Latex Compositions Containing Ethylenically Unsaturated Esters of Long-Chain Alkenols.” U.S. Patent 6,001,913, 1999
14. Thames, SF, Rawlins, JW, Mendon, SK, Johnson, EN, Yu, Z, “Functionalized Vegetable Oil Derivatives, Latex Compositions and Textile Finishes.” U.S. Patent 0236467, 2006
15. Barbosa, JV, Veludo, E, Moniz, J, Magalhães, FD, Bastos, MMSM, “Synthesis and Characterization of Acrylic Fatty Acid Derivative and Use as Reactive Coalescing Agent.” Eur. J. Lipid Sci. Technol., 114 1175–1182 (2012)10.1002/ejlt.201100388 ↗
16. Barbosa, JV, Oliveira, F, Moniz, J, Magalhães, FD, Bastos, MMSM, “Synthesis and Characterization of Allyl Fatty Acid Derivatives as Reactive Coalescing Agents for Latexes.” J. Am. Oil Chem. Soc., 89 2215–2226 (2012)10.1007/s11746-012-2114-y ↗
17. Kaya, E, Mendon, SK, Delatte, D, Rawlins, JW, Thames, SF, “Emulsion Copolymerization of Vegetable Oil Macromonomers Possessing both Acrylic and Allylic Functionalities.” Macromol. Symp., 324 95–106 (2013)10.1002/masy.201200072 ↗
18. Gorkum, R, Bouwman, E, “The Oxidative Drying of Alkyd Paint Catalysed by Metal Complexes.” Coord. Chem. Rev., 249 1709–1728 (2005)10.1016/j.ccr.2005.02.002 ↗
19. Zhou, L, Pakenham, D, Ruiz, J, Aymes, C, Veres, K, Koltisko, B, “Low VOC Coalescing Agents.” U.S. Patent 8,106,239, 2012
20. Wood, A, Chem. Week., 165 22 (2003)
21. Yang, Y, Sheerin, R, Shavel, LC, “Paint Compositions with Low-or Zero-VOC Coalescence Aids and Nano-Particle Pigments.” U.S. Patent 0149591 A1, 2009
22. Sperling, LH, Introduction to Physical Polymer Science, 4th ed. Wiley, Bethlehem, 2006
23. Matyjaszewski, K, Davis, TP, Handbook of Radical Polymerization. Wiley, Hoboken, 200210.1002/0471220450 ↗
24. Savitzky, A, Golay, MJE, “Smoothing and Differentiation of Data by Simplified Least Squares Procedures.” Anal. Chem., 36 1627–1639 (1964)10.1021/ac60214a047 ↗
25. Meissl, K, Smidt, E, Schwanninger, M, “Prediction of Humic Acid Content and Respiration Activity of Biogenic Waste by Means of Fourier Transform Infrared (FTIR) Spectra and Partial Least Squares Regression (PLS-R) Models.” Talanta, 72 791–799 (2007)10.1016/j.talanta.2006.12.005 ↗
26. Harrison, SA, Wheeler, DH, “The Polymerization of Vinyl and Allyl Esters of Fatty Acids.” J. Am. Chem. Soc., 73 839–842 (1951)10.1021/ja01146a102 ↗
27. Sandler, SR, Karo, W, Polymer Syntheses, 2nd ed., Vol. 3. Elsevier Science & Technology Books, London, 1996
28. Chang, SP, Miwa, TK, “Allyl Esters of Crambe-Derived Long-Chain Fatty Acids and Their Polymers.” J. Appl. Polym. Sci., 24 441–454 (1979)10.1002/app.1979.070240212 ↗
29. Vilela, C, Rua, R, Silvestre, JD, Gandini, A, “Polymers and Copolymers from Fatty Acid-Based Monomers.” Ind. Crop Prod., 32 97–104 (2010)10.1016/j.indcrop.2010.03.008 ↗
30. Saam, JC, “Glycol Co-esters of Drying-Oil Fatty Acid Made via Biphasic Catalysis and Resulting Products.” US Patent 5,750,751, 1998
31. Acosta, EJ, Yuan, JS, Bhakta, AS, “The Characteristic Curvature of Ionic Surfactants.” J. Surfactants Deterg., 11 145–158 (2008)10.1007/s11743-008-1065-7 ↗
32. Kosswig, K, “Surfactants.” In: Ullmann’s—Encyclopedia of Industrial Chemistry. Wiley-VCH, Weinheim, 2005
33. Moayed, SH, Fateme, S, Pourmahdian, S, “Synthesis of a Latex with Bimodal Particle Size Distribution for Coating Applications Using Acrylic Monomers.” Prog. Org. Coat., 60 312–319 (2007)10.1016/j.porgcoat.2007.07.023 ↗
34. Stamm, M, Polymers Surface and Interfaces—Characterization, Modification and Applications, 1st ed. Springer, Berlin, 2008
35. Lampman, S, Characterization and Failure Analysis of Plastics, p. 35. ASM International, Materials Park, 200310.31399/asm.tb.cfap.9781627082815 ↗
36. Tan, B, Grijpmaa, DW, Nabuursb, T, Feijen, J, “Crosslinkable Surfactants Based on Linoleic Acid-Functionalized Block Copolymers of Ethylene Oxide and 3-Caprolactone for the Preparation of Stable PMMA Lattices.” Polymer, 46 1347–1357 (2005)10.1016/j.polymer.2004.11.070 ↗
37. Brar, AS, Singh, G, Shankar, R, “Structural Investigations of Poly(methyl methacrylate) by Two-Dimensional NMR.” J. Mol. Struct., 703 69–81 (2004)10.1016/j.molstruc.2004.05.030 ↗
38. Brar, AS, Goyal, AK, Hooda, S, “Two-Dimensional NMR Studies of Acrylate Copolymers.” Pure Appl. Chem., 81 389–415 (2009)10.1351/PAC-CON-08-06-01 ↗
39. Mark, JE, Physical Properties of Polymers, 2nd ed. Springer, New York, 2007
40. Booth, G, Delatte, DE, Thames, SF, “Incorporation of Drying Oils into Emulsion Polymers for Use in Low-VOC Architectural Coatings.” Ind. Crop. Prod., 25 257–265 (2007)10.1016/j.indcrop.2006.12.004 ↗
41. Cheong, MY, Ooi, TL, Ahmad, S, Yunus, WMZW, Kuang, D, “Synthesis and characterization of palm based resin for UV coating.” J. Appl. Polym. Sci., 111 2353–2361 (2008)10.1002/app.29257 ↗
42. Mallégol, J, Gardette, J, Lemaire, J, “Long-Term Behavior of Oil-Based Varnishes and Paints I. Spectroscopic Analysis of Curing Drying Oils.” J. Am. Oil Chem. Soc., 76 967–976 (1999)10.1007/s11746-999-0114-3 ↗
43. Mallégol, J, Gardette, J, Lemaire, J, “Drier Influence on the Curing of Linseed Oil.” Prog. Org. Coat., 39 107–113 (2000)10.1016/S0300-9440(00)00126-0 ↗
44. Mallégol, J, Gardette, J, Lemaire, J, “Long-Term Behavior of Oil-Based Varnishes and Paints. Photo- and Thermooxidation of Cured Linseed Oil.” J. Am. Oil Chem. Soc., 77 257–263 (2000)10.1007/s11746-000-0042-4 ↗