Preparation, characterization, and analysis of anti-corrosion subsea coatings
Source abstract
Abstract
Within this work, a two-component anti-corrosive epoxy primer formulation, Sigmacover™ 280, and its resulting films were prepared and evaluated. The optimum coating time following formulation was extended by adding an appropriate amount of solvent as a controlled thinner. The draw down coating method was identified to be a reproducible and a robust paint film deposition process. Gravimetric analysis, Differential scanning calorimetry (DSC), and through-dry testing were used in the characterization of the curing and drying behavior of each applied primer film. The shortest time for achieving a through-dry state occurred with thinner films cured at the higher temperature, as seen in the film curing/drying. The minimum covercoating time and full cure time of the paint films, cured under the different conditions, were evaluated by means of its dryness, hardness, and curing state studies/characterization.
Source: openalex_inverted_index · Quality: baseline
Research context
OpenAlex topics: Epoxy Resin Curing Processes · Metal and Thin Film Mechanics · Injection Molding Process and Properties
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (15)
Show source-provided references
1. Brakenhoff, R, “Outlook for Offshore Energy.” Oil Gas Financ. J., 12 (4) (2015). http://www.ogfj.com/articles/print/volume-12/issue-4/features/outlook-for-offshore-energy.html
2. Skeates, C, DeBruijn, G, Greenaway, R, Harrison, D, Parris, M, James, S, Mueller, F, Ray, S, Riding, M, Temple, L, Wutherich, K, “High-Pressure, High-Temperature Technologies.” Oilfield Rev., 20 (3) 46–60 (2008)
3. Matias, JR, “Subsea Coatings Research and the Challenges of the Deep Sea.” Asia Pacific Coat. J., 23 16–18 (2010)
4. HSE’s Energy Division (ED), Offshore Oil & Gas Sector Strategy 2014–2017. www.hse.gov.uk/offshore
5. Byars, H, Corrosion Control in Petroleum Production, 2nd ed. NACE, Houston, 1999
6. Graystone, JA, “Design of Anticorrosive Paints.” In: Lambourne, L (ed.) Paint and Surface Coatings: Theory and Practice, pp. 422–425. Ellis Horwood Limited, Chichester (1987)
7. Barletta, M, Lusvarghi, L, Pighetti Mantini, F, Rubino, G, “Epoxy-Based Thermosetting Powder Coatings: Surface Appearance, Scratch Adhesion and Wear Resistance.” Surf. Coat. Technol., 201 (16–17) 7479–7504 (2007)10.1016/j.surfcoat.2007.02.017 ↗
8. Dong, Y, Yu, D, “Effect of CO2 on Property of Anti-Corrosion of Epoxy Coating.” Proc. International Conference on Pipelines and Trenchless Technology, Shanghai, China, 200910.1061/41073(361)164 ↗
9. Chandler, KA (ed.), “Paint Coatings.” In: Marine and Offshore Corrosion, pp. 214. Butterworths & Co Ltd., London (1985)10.1016/B978-0-408-01175-4.50015-5 ↗
10. PPG, Product Data Sheet Sigmacover 280. www.newguardcoatings.com
11. Escuderos, M, Sánchez, S, Jiménez, A, “Quartz Crystal Microbalance (QCM) Sensor Arrays Selection for Olive Oil Sensory Evaluation.” Food Chem., 124 (3) 857–862 (2011)10.1016/j.foodchem.2010.07.007 ↗
12. Wisanrakkit, G, Gillham, JK, “The Glass Transition Temperature (Tg) as an Index of Chemical Conversion of a High-Tg Amine/Epoxy System: Chemical and Diffusion-Controlled Reaction Kinetics.” J. Appl. Polym. Sci., 41 (11–12) 2885–2929 (1990)10.1002/app.1990.070411129 ↗
13. Urbaniak, M, Grudzinski, K, “Time-Temperature-Transformation (TTT) Cure Diagram of EPY® Epoxy System.” Polymer, 52 (2) 117–126 (2007)
14. Rabearison, N, Jochum, C, Grandidier, J, “A Cure Kinetics, Diffusion Controlled and Temperature Dependent, Identification of the Araldite LY556 Epoxy.” J. Mater. Sci., 46 (3) 787–796 (2011)10.1007/s10853-010-4815-7 ↗
15. Philip A. Schweitzer, PE (ed.), “Surface Preparation and Application.” In: Paint and Coatings: Applications and Corrosion Resistance, pp. 84–86. Taylor & Francis Group, London, New York (2006)