A feasibility study on the deposition and in-situ modification of soda lignin by suspension plasma spraying
Source abstract
Abstract
In this study, low-energy suspension plasma spraying (LE-SPS) was introduced as a novel approach for the deposition and simultaneous plasma-induced chemical modification of soda lignin. A colloidal lignin particle suspension was deposited onto glass substrates using a modified plasma spraying system with radial suspension injection. Scanning electron microscopy revealed continuous and dense coatings with an average thickness of approximately 4 µm. X-ray photoelectron spectroscopy (XPS), Fourier transform infrared (FT-IR) spectroscopy, and 1H/13C nuclear magnetic resonance (NMR) spectroscopy analyses indicated substantial plasma-induced chemical restructuring. The coatings exhibited increased oxygen-containing functionalities, including carbonyl and carboxyl/ester-type contributions, together with changes in aromatic signals. These spectroscopic changes are consistent with oxidative modification of lignin and increased contributions from ether- and ester-like environments. Overall, the results demonstrated that LE-SPS enabled lignin deposition accompanied by chemical transformation into a chemically reorganized lignin-based coating without additional crosslinkers, catalysts, or organic solvents.
Source: openalex_inverted_index · Quality: baseline
Research context
OpenAlex topics: Lignin and Wood Chemistry · Catalysis and Hydrodesulfurization Studies · Subcritical and Supercritical Water Processes
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (37)
Show source-provided references
1. A comprehensive review of the application of cold plasma technology in lignocellulosic biomass pretreatment10.1002/bbb.2706 ↗
2. Comprehensive structural analysis of biorefinery lignins with a quantitative 13 NMR approach10.1039/C5RA16649G ↗
3. Morphological and wettability properties of thin coating films produced from technical lignins10.1021/acs.langmuir.0c00826 ↗
4. Plasma polymerization of acrylic acid by atmospheric pressure nitrogen plasma jet for biomedical applications10.1002/ppap.201200044 ↗
5. Improvement of direct liquefaction of technical alkaline lignin pretreated by alkaline hydrogen peroxide10.1016/j.jaap.2016.07.022 ↗
6. From waste to valuable resource: lignin as a sustainable anti-corrosion coating10.3390/coatings8120454 ↗
7. Kraft lignin depolymerization in an ionic liquid without a catalyst10.15376/biores.10.3.4933-4946 ↗
8. Influence of DC pulsed atmospheric pressure plasma jet processing conditions on polymer activation10.1002/ppap.201000145 ↗
9. Classification of lignins from different botanical origins by FT-IR spectroscopy10.1515/hfsg.1991.45.s1.21 ↗
10. Lignin-based coatings: a sustainable approach to produce antibacterial textiles10.3390/ijms26031217 ↗
11. Valorization of pyrolysis liquids: ozonation of the pyrolytic lignin fraction and model components10.1021/acssuschemeng.8b04856 ↗
12. Mechanisms of plasma polymerization–reviewed from a chemical point of view10.1002/ppap.201100038 ↗
13. On the significance of the superoxide radical in oxidative delignification, studied with 4-t-butylsyringol and 4-t-butylguaiacol. Part I. The mechanism of aromatic ring opening10.1515/hfsg.1994.48.5.405 ↗
14. Epoxidation of Kraft lignin as a tool for improving the mechanical properties of epoxy adhesive10.3390/molecules25112513 ↗
15. Immobilization of lignin nano/microparticles on plasma-modified polymer nanofibers10.1016/j.ijbiomac.2026.150226 ↗
16. A comparison of alkaline and organosolv lignin extraction methods from coconut husks as an alternative material for green applications10.15376/biores.17.1.469-491 ↗
17. Hydrogen-bonding network and OH stretch vibration of cellulose: comparison of computational modeling with polarized IR and SFG spectra10.1021/acs.jpcb.5b08015 ↗
18. Linking lignin source with structural and electrochemical properties of lignin-derived carbon materials10.1039/C8RA08539K ↗
19. Indirect treatment effects of water–air MHCD jet on the inactivation of Penicillium digitatum suspension10.1109/TPS.2016.2608926 ↗
20. Atmospheric pressure plasma jet treatment of polyethylene surfaces for adhesion improvement10.1002/ppap.200732402 ↗
21. Atmospheric plasma spray processes: from micro to nanostructures
22. A simple approach to produce hydrophobic biobased coatings using methylcellulose and organosolv lignin10.1039/D4SM00427B ↗
23. Characterization of CO2 precipitated Kraft lignin to promote its utilization10.1039/B913602A ↗
24. Smooth model surfaces from lignin derivatives. I. Preparation and characterization10.1021/la052284c ↗
25. Spatially resolved measurements of the physical plasma parameters and the chemical modifications in a twin surface dielectric barrier discharge for gas flow purification10.1002/ppap.201600255 ↗
26. Characterization of an oligomeric lignin-derived UV absorber produced from hardwood beech10.1021/acsomega.5c00654 ↗
27. Embracing sustainability: the world of bio-based polymers in a mini review10.3390/polym16070950 ↗
28. SiOx-based gas barrier coatings for polymer substrates by atmospheric pressure plasma jet deposition10.1002/ppap.200931707 ↗
29. Generation of a lignin-polyester coating for the corrosion protection of steel surfaces applied by atmospheric plasma spraying
30. Sharma · 2020
31. Cross-linked lignin coatings produced by UV light and SF6 plasma treatments10.1016/j.porgcoat.2018.12.017 ↗
32. Recovery and characterization of lignin from alkaline straw pulping black liquor: as feedstock for bio-oil research10.1002/app.42057 ↗
33. Recent findings on lignin-based wear and corrosion resistance coatings10.1515/corrrev-2024-0087 ↗
34. Plasma co-polymerization of HMDSO and limonene with an atmospheric pressure plasma jet10.3390/plasma5010004 ↗
35. Mechanisms of OH and H2O2 formation in the liquid phase induced by an atmospheric pressure plasma jet with oxygen introduction10.1063/5.0268974 ↗
36. O2(b1Σg+) quenching by O2, CO2, H2O, and N2 at temperatures of 300–800 K10.1021/acs.jpca.7b07885 ↗
37. Valorizing lignin through solvent-free plasma modification for high-performance polylactic acid bioplastics10.1016/j.biortech.2026.134293 ↗