journal article·2026-06-01Open access

Green production of dissolving pulp from sugarcane bagasse via carbonate-based oxygen-alkali pulping and enzymatic totally chlorine-free bleaching

Peng Gan, Kai Zhang, Qixi Xu, Guihua Yang, Chengcheng Qiao, Junchao Li, Jiachuan Chen

Abstract

The increasing demand for dissolving pulp in high-value applications imposes resource constraints on traditional feedstocks and thus necessitates the exploration of eco-friendly non-wood alternatives. However, conventional processes are inappropriate for non-wood biomass, causing cellulose degradation and environmental concerns. Therefore, developing green and efficient pulping techniques for non-wood feedstock is of great significance. This study employed sugarcane bagasse as a raw material and innovatively developed a carbonate-based oxygen-alkali pulping (COAP) process combined with an enzymatic totally chlorine-free (TCF) bleaching sequence, which was successfully integrated to achieve the green and efficient production of dissolving pulp. The mechanism by which sodium carbonate regulates active oxygen species (AOs) to selectively deconstruct lignin during the COAP process was systematically elucidated, and a multivariate quadratic polynomial regression model for the COAP process was established. In addition, the synergistic mechanism of enzymatic treatment and H 2 O 2 in the targeted chromophore destruction was analyzed, and a new strategy for selective lignin removal was proposed. The results showed that the prehydrolysis stage achieved selective removal of 83.7% hemicellulose while retaining 89.7% cellulose at 170 °C. During the COAP stage, the partial replacement of NaOH with Na 2 CO 3 delayed the superoxide anion radicals (O 2 – ·) protonation to regulate AOs. This not only achieved selective oxidative degradation of lignin and maximized cellulose preservation, but also significantly reduced the bleaching demand in the subsequent stage. Moreover, response surface methodology optimization identified the optimal pulping conditions as a sodium carbonate substitution ratio of 50%, a temperature of 105.8 °C, and a reaction time of 3 h, producing pulp with the International Organization for Standardization (ISO) brightness of 47.6%, an α -cellulose content of 89.1%, and a yield of 36.4%. During the enzymatic bleaching stage, a cascade pretreatment with xylanase and laccase (20 U/g) selectively degraded residual lignin-carbohydrate complexes and lignin chromophoric groups, significantly reducing the subsequent H 2 O 2 (3%) bleaching load. Finally, high-quality dissolving pulp with a brightness of 81.2% ISO, high α -cellulose content (91.02%), high viscosity (248 mL/g), and overall yield (30.8%) was obtained. This study demonstrates a promising green biorefinery route for the valorization of agricultural residues.
Source: openalex_inverted_index · Quality: baseline

Research context

OpenAlex topics: Lignin and Wood Chemistry · Enzyme-mediated dye degradation · Advanced Cellulose Research Studies

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (47)

Show source-provided references
1. Dissolving pulp production from sugar cane bagasse10.1016/j.indcrop.2013.09.041 ↗
2. Dissolving wood pulp production: a review10.1007/s13399-022-02442-z ↗
3. Solid base catalyzed depolymerization of lignin into low molecular weight products10.1039/C6GC02701F ↗
4. Development of dissolving pulp from Phyllostachys pubescens stem by prehydrolysis soda cooking with 2-methylanthraquinone10.1016/j.indcrop.2022.114570 ↗
5. An integrated and scalable biorefinery approach for producing high purity xylo-oligosaccharides from prehydrolysis liquor10.1016/j.indcrop.2024.120348 ↗
6. Selective activation of C-C bonds in lignin model compounds and lignin for production of value-added chemicals
7. Acidic deep eutectic solvent treatment for viscosity control and reactivity enhancement of bamboo dissolving pulp10.1007/s10570-023-05043-9 ↗
8. Beyond cotton and polyester: an evaluation of emerging feedstocks and conversion methods for the future of fashion industry
9. A review on the efficient enzymatic regulation for lignin separation from pulping pre-hydrolysis liquor10.1016/j.indcrop.2025.122184 ↗
10. Optimization strategies for the low-temperature NACO pulping process of sugarcane bagasse and response surface modeling10.1007/s10570-024-06364-z ↗
11. On the importance of radical formation in pulp bleaching
12. Formation and involvement of superoxide (O2-/HO2) and hydroxyl (OH·) radicals in TCF bleaching processes: a review10.1515/hfsg.1997.51.1.34 ↗
13. C-modified TiO2 using lignin as carbon precursor for the solar photocatalytic degradation of acetaminophen10.1016/j.cej.2018.10.154 ↗
14. Mechanisms of oxidative degradation of carbohydrates during oxygen delignification. II. Reaction of photochemically generated hydroxyl radicals with methyl β-cellobioside10.1081/WCT-100102655 ↗
15. Evaluating mechanism of banana pseudo-stem retting using seawater: a cost-effective surface pre-treatment approach
16. Evaluating process of auto-hydrolysis prior to kraft pulping on production of chemical pulp for end used paper-grade products
17. Metal-free photochemical degradation of lignin-derived aryl ethers and lignin by autologous radicals through ionic liquid induction10.1002/cssc.201901796 ↗
18. Pyrolysis of lignin in gas-phase isothermal and cw-CO2 laser powered non-isothermal reactors10.1021/acs.energyfuels.8b03312 ↗
19. Secondary cell walls: biosynthesis and manipulation10.1093/jxb/erv533 ↗
20. Sugarcane bagasse as an environmentally friendly composite material to face the sustainable development era10.1007/s13399-023-03764-2 ↗
21. Review of advances in the development of laccases for the valorization of lignin to enable the production of lignocellulosic biofuels and bioproducts10.1016/j.biotechadv.2021.107809 ↗
22. Analyzing the delignification, carbohydrate degradation kinetics, and mechanism of wet-storage bagasse in oxygen-alkali cooking10.1007/s10570-022-04843-9 ↗
23. Optimization of low-temperature oxygen-alkali pulping process for reed and analysis using response surface methodology10.15376/biores.20.2.4068-4095 ↗
24. Comprehensive comparison of cellulose nanocrystal (CNC) drying using multi-frequency ultrasonic technology with selected conventional drying technologies
25. Comparison of hot-water extraction and steam treatment for production of high purity-grade dissolving pulp from green bamboo10.1007/s10570-014-0234-2 ↗
26. Transformation of lignin into value-added products via thermal cracking, electrolysis and photolysis10.1007/s42114-024-01008-z ↗
27. Tribological behavior of aluminum nanocomposites studied by application of response surface methodology10.1007/s42114-019-00131-6 ↗
28. Response surface modeling of wheat straw pulping using sodium carbonate and sodium hydroxide mixtures
29. Environment-friendly non-sulfur cooking and totally ChlorineFree bleaching for preparation of sugarcane bagasse cellulose10.2115/fiberst.2017-0025 ↗
30. Deep eutectic solvents for efficient fractionation of lignocellulose to produce uncondensed lignin and high-quality cellulose10.1021/acssuschemeng.4c09673 ↗
31. Studying the effects of laccase treatment in a softwood dissolving pulp: cellulose reactivity and crystallinity10.1016/j.carbpol.2014.11.019 ↗
32. An enzyme-catalysed bleaching treatment to meet dissolving pulp characteristics for cellulose derivatives applications10.1016/j.biortech.2013.08.104 ↗
33. Simultaneous obtaining of oxidized lignin and cellulosic pulp from steam-exploded sugarcane bagasse10.1016/j.indcrop.2020.112227 ↗
34. Electron transfer mediator systems for bleaching of paper pulp10.1039/b311898n ↗
35. Xylan enriched viscose fibers10.1007/s10570-014-0302-7 ↗
36. Rain tree (Samanea saman) seed oil: solvent extraction, optimization and characterization
37. Fe-based dual-center heterogeneous catalyst assisted with reduced graphene oxide for the activation of peroxymonosulfate10.1007/s42114-023-00757-7 ↗
38. Hydrogen peroxide production with photocatalysts based on carbon nitride: evaluation criteria, reaction mechanism, improvement scheme, and development opportunity10.1021/acscatal.5c01609 ↗
39. Sodium carbonate pulping of wheat straw: an alternative fiber source for various paper applications10.3390/agronomy14010162 ↗
40. The stability of monochlorotriazinyl reactive dyes on cellulose films in aqueous alkaline solutions containing peroxide bleaching agents10.1016/S0143-7208(01)00053-5 ↗
41. Effects of hydrothermal pretreatment on the dissolution and structural evolution of hemicelluloses and lignin: a review10.1016/j.carbpol.2021.119050 ↗
42. Carbonate pre-treatment of wood for transformative structural applications through densification10.1016/j.indcrop.2022.115645 ↗
43. Conductive polypyrrole/viscose fiber composites10.1016/j.carbpol.2015.03.076 ↗
44. Producing dissolving pulp from agricultural waste10.1039/D4SU00534A ↗
45. Preparation and characterization of dissolving pulp and lyocell fibers from corncob10.1007/s10570-023-05179-8 ↗
46. Soda pulping of sunn hemp (Crotalaria juncea L.) and its usage in molded pulp packaging
47. Versatile photoelectrocatalysis strategy raising up the green production of hydrogen peroxide10.1002/aenm.202300119 ↗