Corrosion Behavior of Ag-doped TiO2 Coatings on Commercially Pure Titanium in Simulated Body Fluid Solution
Source abstract
Abstract
TiO2 films including different amounts of Ag obtained by sol-gel method on commercially pure titanium (CP-Ti) and the corrosion properties of Ag-doped TiO2 films were investigated by potentiodynamic polarisation and Electrochemical Impedance Spectroscopy (EIS) tests in Simulated Body Fluid (SBF) solution. The results were compared with untreated and un-doped samples. Surface characterizations before and after the corrosion tests were performed by the Scanning Electron Microscopy (SEM) and X-ray Diffraction (XRD) analysis. It was observed that Ag-doping for TiO2 films improved the corrosion resistance when compared with untreated and un-doped TiO2 film coated samples. The highest corrosion resistance was obtained from Ag-doped samples coated with a solution of 0.05 M Ag.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Corrosion Behavior and Inhibition · Metal and Thin Film Mechanics · High-Temperature Coating Behaviors
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (25)
Show source-provided references
1. Long M, Rack H J. Titanium alloys in total joint replacement—A materials science perspective. Biomaterials, 1998, 19, 1621–1639.10.1016/S0142-9612(97)00146-4 ↗
2. Bloyce P Y, Dong Q H, Bell T. Surface modification of titanium alloys for combined improvements in corrosion and wear resistance. Surface and Coatings Technology, 1998, 107, 125–132.10.1016/S0257-8972(98)00580-5 ↗
3. Wilson A, Matthews A, Housden J, Turner R, Garside B. A comparison of the wear and fatigue properties of plasma-assisted physical vapour deposition TiN, CrN and duplex coatings on Ti-6Al-4V. Surface and Coatings Technology, 1993, 62, 600–607.10.1016/0257-8972(93)90306-9 ↗
4. Çelik A, Aslan M, Yetim A F, Bayrak Ö. Wear behavior of plasma oxidized CoCrMo alloy under dry and simulated body fluid conditions. Journal of Bionic Engineering, 2014, 11, 303–310.10.1016/S1672-6529(14)60035-4 ↗
5. Wang Q, Zhang L, Dong J. Effects of plasma nitriding on microstructure and tribological properties of CoCrMo alloy implant materials. Journal of Bionic Engineering, 2010, 7, 337–344.10.1016/S1672-6529(10)60265-X ↗
6. Dong H, Bell T. Enhanced wear resistance of titanium surfaces by a new thermal oxidation treatment. We a r, 2000, 238, 131–137.
7. Luo Y, Jiang H, Cheng G, Liu H. Effect of carburization on the mechanical properties of biomedical grade titanium alloys. Journal of Bionic Engineering, 2011, 8, 86–89.10.1016/S1672-6529(11)60004-8 ↗
8. Yetim A F, Alsaran A, Efeoglu I, Celik A. A comparative study: The effect of surface treatments on the tribological properties of Ti–6Al–4V alloy. Surface and Coatings Technology, 2008, 202, 2428–2432.10.1016/j.surfcoat.2007.08.027 ↗
9. Comakli O, Yetim T, Celik A. The effect of calcination temperatures on wear properties of TiO2 coated CP-Ti. Surface and Coatings Technology, 2014, 246, 34–39.10.1016/j.surfcoat.2014.02.059 ↗
10. Kokubo T, Takadama H. How useful is SBF in predicting in vivo bone bioactivity? Biomaterials, 2006, 27, 2907–2915.10.1016/j.biomaterials.2006.01.017 ↗
11. Cheng Z J, Lian J S, Hui Y X, Li G. Biocompatible DCPD coating formed on AZ91D magnesium alloy by chemical deposition and its corrosion behaviors in SBF. Journal of Bionic Engineering, 2014, 11, 610–619.10.1016/S1672-6529(14)60072-X ↗
12. Yetim A F. Investigation of wear behavior of titanium oxide films, produced by anodic oxidation, on commercially pure titanium in vacuum conditions. Surface and Coatings Technology, 2010, 205, 1757–1763.10.1016/j.surfcoat.2010.08.079 ↗
13. Krishna L R, Purnima A S, Sundararajan G. A comparative study of tribological behavior of microarc oxidation and hard-anodized coatings. We a r, 2006, 261, 1095–1101.
14. Krishna D S R, Brama Y L, Sun Y. Thick rutile layer on titanium for tribological applications. Tribology International, 2007, 40, 329–334.10.1016/j.triboint.2005.08.004 ↗
15. Mechiakh R, Sedrine N B, Chtourou R, Bensaha R. Correlation between microstructure and optical properties of nano-crystalline TiO2 thin films prepared by sol–gel dip coating. Applied Surface Science, 2010, 257, 670–676.10.1016/j.apsusc.2010.08.008 ↗
16. Wang H, Zang R, Yuan Z, Shu X, Liu E, Han Z. A comparative study of the corrosion performance of titanium (Ti), titanium nitride (TiN), titanium dioxide (TiO2) and nitrogen-doped titanium oxides (N–TiO2), as coatings for biomedical applications. Ceramics International, 2015, 41, 11844–11855.10.1016/j.ceramint.2015.05.153 ↗
17. Arman S Y, Omidvar H, Tabaian S H, Sajjadnejad M, Fauladvand S, Afshar S. Evaluation of nanostructured S-doped TiO2 thin films and their photoelectrochemical application as photoanode for corrosion protection of 304 stainless steel. Surface and Coatings Technology, 2014, 251, 162–169.10.1016/j.surfcoat.2014.04.020 ↗
18. Fu T, Shen Y, Alajmi Z, Wang Y, Yang S, Li G. Solgel derived Ag-containing TiO2 films on surface roughened biomedical NiTi alloy. Ceramics International, 2014, 40, 12423–12429.10.1016/j.ceramint.2014.04.093 ↗
19. Yu B, Leung K M, Guo Q, Lau W M, Yang J. Synthesis of Ag-TiO2 composite nano thin film for antimicrobial application. Nanotechnology, 2011, 22, 115603.10.1088/0957-4484/22/11/115603 ↗
20. Piszczek P, Muchewicz Z, Radtke A, Gryglas M, Dahm H, Rozycki H. CVD of TiO2 and TiO2/Ag antimicrobial layers: Deposition from the hexanuclear μ-oxo Ti(IV) complex as a precursor, and the characterization. Surface and Coatings Technology, 2013, 222, 38–43.10.1016/j.surfcoat.2013.01.057 ↗
21. Erakovic S, Jankovic A, Ristoscu C, Duta L, Serban N, Visan A, Mihailescu I N, Stan G E, Socol M, Iordache O, Dimitrescu I, Lucurescu C R, Janackovic D, Miskovic-Stankovic V. Antifungal activity of Ag: hydroxyapatite thin films synthesized by pulsed laser deposition on Ti and Ti modified by TiO2 nanotubes substrates. Applied Surface Science, 2014, 293, 37–45.10.1016/j.apsusc.2013.12.029 ↗
22. Wu H, Zhang X, Geng Z, Yin Y, Hang R, Huang X. Preparation, antibacterial effects and corrosion resistant of porous Cu–TiO2 coatings. Applied Surface Science, 2014, 308, 43–49.10.1016/j.apsusc.2014.04.081 ↗
23. Hou X, Ma H, Liu F, Deng J, Ai Y, Zhao X, Mao D, Li D, Liao B. Synthesis of Ag ion-implanted TiO2 thin films for antibacterial application and photocatalytic performance. Journal of Hazardous Materials, 2015, 299, 59–66.10.1016/j.jhazmat.2015.05.014 ↗
24. Stern M, Geary A L. Electrochemical polarization, 1. A theoretical analysis of the shape of polarization curves. Journal of Electrochemical Society, 1957, 104, 56–63.10.1149/1.2428496 ↗
25. Dikici B, Tekmen C, Yigit O, Gavgali M, Cocen U. Detrimental effect of particle sol–gel coating on the corrosion behavior of A380–SiC composite. Corrosion Science, 2009, 51, 469–476.10.1016/j.corsci.2008.12.023 ↗