Analysis of Wear Mechanisms and Cutting Surface Performance in Bioinspired Woodpecker-Beak Rotary Blades for Wood Machining

1. Wyeth, D., Goli, G., & Atkins, A. (2009). Fracture toughness, chip types and the mechanics of cutting wood. A review COST action E35 2004–2008: Wood machining – micromechanics and fracture. Holzforschung, 63(2), 168–180. https://doi.org/10.1515/HF.2009.01710.1515/HF.2009.017 ↗

2. Ru, S., Han, Y., & Zhang, X. (2025). Influence of the V-shaped rubber knife of natural rubber trees on the quality of cut wood. Journal of Wood Science, 71, Article 17. https://doi.org/10.1186/s10086-025-02190-410.1186/s10086-025-02190-4 ↗

3. Zas, R., Quiroga, R., Touza, R., Vázquez-González, C., Sampedro, L., & Lema, M. (2020). Resin tapping potential of Atlantic maritime pine forests depends on tree age and timing of tapping. Industrial Crops and Products, 157, Article 112940. https://doi.org/10.1016/j.indcrop.2020.11294010.1016/j.indcrop.2020.112940 ↗

4. Zeleke, G., Dejene, T., Tadesse, W., & Martín-Pinto, P. (2021). Gum Arabic production and population status of Senegalia senegal (L.) Britton in dryland forests in South Omo zone. Ethiopia Sustainability, 13(21), 11671. https://doi.org/10.3390/su13211167110.3390/su132111671 ↗

5. Liu, M., Zhao, Y., Ma, Y., Liu, S., Yao, J., Chi, Y., Li, H., Liao, K., & Zhu, Y. (2022). The study of schizogenous formation of secretory ducts in Ferula ferulaeoides (Steud.) Korov. Protoplasma, 259, 679–689. https://doi.org/10.1007/s00709-021-01690-610.1007/s00709-021-01690-6 ↗

6. Orlowski, K., & Palubicki, B. (2009). Recent progress in research on the cutting processes of wood. A review COST action E35 2004–2008: Wood machining – micromechanics and fracture. Holzforschung, 63(2), 181–185. https://doi.org/10.1515/HF.2009.01510.1515/HF.2009.015 ↗

7. Ogun, P. S., & Jackson, M. R. (2017). Active vibration control and real-time cutter path modification in rotary wood planing. Mechatronics, 46, 21–31. https://doi.org/10.1016/j.mechatronics.2017.06.00710.1016/j.mechatronics.2017.06.007 ↗

8. Wellenreiter, P., Hernández, R. E., Cáceres, C. B., & Blais, C. (2022). Cutting forces and noise in helical planing black spruce wood as affected by the helix angle and feed per knife. Wood Material Science & Engineering, 18(2), 549–558. https://doi.org/10.1080/17480272.2022.205607910.1080/17480272.2022.2056079 ↗

9. Kazlauskas, D., Jankauskas, V., Bendikienė, R., Keturakis, G., & Mačėnaitė, L. (2017). Wear of cemented tungsten carbide (WC) router cutters during oak wood milling. Mechanika, 23(3), 469–472. https://doi.org/10.5755/j01.mech.23.3.1848210.5755/j01.mech.23.3.18482 ↗

10. Pałubicki, B. (2021). Cutting forces in peripheral up-milling of particleboard. Materials, 14(9), 2208. https://doi.org/10.3390/ma1409220810.3390/ma14092208 ↗

11. Du, Y., Tian, B., Zhang, J., Li, L., Liu, H., & Luo, B. (2024). Sanding performance and failure progress of precision-shaped abrasive belt during sanding MDF. European Journal of Wood and Wood Products, 82, 461–472. https://doi.org/10.1007/s00107-023-02013-710.1007/s00107-023-02013-7 ↗

12. Nasir, V., & Cool, J. (2018). A review on wood machining: Characterization, optimization, and monitoring of the sawing process. Wood Material Science & Engineering, 15(1), 1–16. https://doi.org/10.1080/17480272.2018.146546510.1080/17480272.2018.1465465 ↗

13. Orlowski, K. A., Ochrymiuk, T., Anthony Atkins, A., & Chuchala, D. (2013). Application of fracture mechanics for energetic effects predictions while wood sawing. Wood Science and Technology, 47, 949–963. https://doi.org/10.1007/s00226-013-0551-x10.1007/s00226-013-0551-x ↗

14. Orlowski, K. A., Chuchala, D., Szczepanski, M., Migda, W., Wojnicz, W., & Sandak, J. (2022). Lateral forces determine dimensional accuracy of the narrow-kerf sawing of wood. Scientific Reports, 12, Article 86. https://doi.org/10.1038/s41598-021-04129-310.1038/s41598-021-04129-3 ↗

15. Yu, H., Han, Z., Zhang, J., & Zhang, S. (2021). Bionic design of tools in cutting: Reducing adhesion, abrasion or friction. Wear, 203955, 482–483. https://doi.org/10.1016/j.wear.2021.20395510.1016/j.wear.2021.203955 ↗

16. You, C., Zhao, G., Chu, X., Zhou, W., Long, Y., & Lian, Y. (2020). Design, preparation and cutting performance of bionic cutting tools based on head microstructures of dung beetle. Journal of Manufacturing Processes, 58, 129–135. https://doi.org/10.1016/j.jmapro.2020.07.05710.1016/j.jmapro.2020.07.057 ↗

17. Li, S., Huang, C., Liu, H., Shi, Z., Ji, L., Cui, X., Du, C., Wang, Z., Xu, L., & Huang, S. (2025). FEM and experimental research on residual stress, crack propagation and toughening mechanisms of novel bionic ceramic cutting tools. Materials Characterization, 223, Article 114875. https://doi.org/10.1016/j.matchar.2025.11487510.1016/j.matchar.2025.114875 ↗

18. Zhao, J., Guo, M., Lu, Y., Huang, D., & Zhuang, J. (2020). Design of bionic locust mouthparts stubble cutting device. International Journal of Agricultural and Biological Engineering, 13(1), 20–28. https://doi.org/10.25165/j.ijabe.20201301.503110.25165/j.ijabe.20201301.5031 ↗

19. Ni, J., Zhang, H., Feng, K., & Zhao, H. (2022). Assessment of a bionic broach implanted with nylon fibers. Materials, 15(24), Article 9040. https://doi.org/10.3390/ma1524904010.3390/ma15249040 ↗

20. Yu, H., Lu, Y., & Wang, J. (2019). Experimental investigation on grinding temperature of Ti–6Al–4 V using biomimetic engineered grinding wheel. International Journal of Precision Engineering and Manufacturing-Green Technology, 6, 163–173. https://doi.org/10.1007/s40684-019-00050-310.1007/s40684-019-00050-3 ↗

21. Yu, H., Zhang, W., Lu, Y., & Wang, J. (2019). Research on grinding forces of a bionic engineered grinding wheel. Journal of Manufacturing Processes, 48, 185–190. https://doi.org/10.1016/j.jmapro.2019.10.03110.1016/j.jmapro.2019.10.031 ↗

22. Xu, S., Li, L., Tong, J., & Li, M. (2017). Research of bionic design on tools with rostrum of Cyrtotrachelus Bugueti Guer (coleoptera: Curculionidae). Microscopy Research & Technique, 80, 478–485. https://doi.org/10.1002/jemt.2281810.1002/jemt.22818 ↗

23. Tian, K., Li, X., Zhang, B., Chen, Q., Shen, C., & Huang, J. (2017). Design and test research on cutting blade of corn harvester based on bionic principle. Applied Bionics and Biomechanics, 8, Article 6953786. https://doi.org/10.1155/2017/695378610.1155/2017/6953786 ↗

24. Luo, Y., Li, J., He, S., & Wu, W. (2024). Design and simulation study of structural parameters of bionic cutters for tea harvest imitating Aeolesthes induta Newman. Applied Sciences, 14(21), Article 9763. https://doi.org/10.3390/app1421976310.3390/app14219763 ↗

25. Wang, L., Cheng, J., Pu, F., Li, D., Zhang, M., & Fan, Y. (2011). Why do woodpeckers resist head impact injury: A biomechanical investigation. PLoS One, 6(10), Article e26490. https://doi.org/10.1371/journal.pone.002649010.1371/journal.pone.0026490 ↗

26. Ding, Z., Wang, B., Xiao, H., & Duan, Y. (2021). Hybrid bio-inspired structure based on nacre and woodpecker beak for enhanced mechanical performance. Polymers, 13(21), 3681. https://doi.org/10.3390/polym1321368110.3390/polym13213681 ↗

27. Li, Y., Zhang, W., Meng, Q., Jiang, G., & Wu, C. (2020). How woodpecker protects its brain from concussion during pecking compared with chicken and pigeon. AIP Advances, 10(6), Article 065001. https://doi.org/10.1063/5.000454610.1063/5.0004546 ↗

28. Xu, P., Ni, Y., Liu, J., Zhang, W., Liu, S., Wang, L., & Fan, Y. (2021). Biological analysis of woodpecker’s brain after impact experiments. Science China. Technological Sciences, 64, 1101–1106. https://doi.org/10.1007/s11431-020-1754-010.1007/s11431-020-1754-0 ↗

29. Myczko, Ł., Mizerová, Z., Kubicka, A. M., Sparks, T. H., & Hromada, M. (2020). Bill morphology and biometrics of three sibling woodpecker species from sympatric populations. Bird Study, 67(1), 8–18. https://doi.org/10.1080/00063657.2020.172687310.1080/00063657.2020.1726873 ↗

30. Zhu, Z., Wu, C., & Zhang, W. (2014). Frequency analysis and anti-shock mechanism of woodpecker’s head structure. Journal of Bionic Engineering, 11, 282–287. https://doi.org/10.1016/S1672-6529(14)60045-710.1016/S1672-6529(14)60045-7 ↗

31. Biju, B., Ranandu, A., Krishnan, A. R., Nath, A., Nath, G., & Francis, C. (2020). J. Damping characteristics of woodpecker inspired layered shock absorbing structures. Materials Today: Proceedings. 25, 140–143. https://doi.org/10.1016/j.matpr.2019.12.18710.1016/j.matpr.2019.12.187 ↗

32. Walters, E. L., Robles, H., Czeszczewik, D., Perktas, U., & Pasinelli, G. (2020). Conservation and Ecology of Woodpeckers. Foreword to the 8th International Woodpecker Conference Proceedings. Acta Ornithologica. (1), 61–62. https://doi.org/10.3161/00016454AO2020.55.1.00610.3161/00016454AO2020.55.1.006 ↗

33. Wang, L., Zhang, H., & Fan, Y. (2011). Comparative study of the mechanical properties, micro-structure, and composition of the cranial and beak bones of the great spotted woodpecker and the lark bird. Science China. Life Sciences, 54, 1036–1041. https://doi.org/10.1007/s11427-011-4242-210.1007/s11427-011-4242-2 ↗

34. Zhang, J., Liu, Z., Dai, H., Hedayati, R., Yuan, Y., & Zhang, G. (2020). Effect of impact position and fan rotational speed on bird-impact process. Tianjin Daxue Xuebao (Ziran Kexue Yu Gongcheng Jishu Ban) = Journal of Tianjin University Science and Technology, 53, 492–501. https://doi.org/10.11784/tdxbz20190900210.11784/tdxbz201909002 ↗

35. Wang, J., Fu, W., Ma, H., Liu, B., Xiao, Y., & Zhu, Y. (2017). Application of FDM technology in biomimetic structure molding of woodpeckers. Space Medicine & Medical Engineering, 30(02), 103–107. https://doi.org/10.16289/j.cnki.1002-0837.2017.02.00610.16289/j.cnki.1002-0837.2017.02.006 ↗

36. Siow, P. C., Ghani, J. A., Ghazali, M. J., Jaafar, T. R., Selamat, M. A., & Haron, C. H. C. (2013). Characterization of TiCN and TiCN/ZrN coatings for cutting tool application. Ceramics International, 39(2), 1293–1298. https://doi.org/10.1016/j.ceramint.2012.07.06110.1016/j.ceramint.2012.07.061 ↗

37. Sampath Kumar, T., Vinoth Jebaraj, A., Sivakumar, K., Shankar, E., & Tamiloli, N. (2017). Characterization of TiCN coating synthesized by the plasma enhanced physical vapour deposition process on a cemented carbide tool. Surface Review and Letters, 25(08), Article 1950028. https://doi.org/10.1142/S0218625X1950028810.1142/S0218625X19500288 ↗

38. Zhang, C., Sheng, X., Zhang, S., Gao, J., Yuan, T., Zhang, J., & Li, W. (2018). Experiment of influence factors on sawing power consumption for natural rubber mechanical tapping. Transactions of the Chinese Society of Agricultural Engineering, 34(17), 32–37. https://doi.org/10.11975/j.issn.1002-6819.2018.17.00510.11975/j.issn.1002-6819.2018.17.005 ↗

39. Mokhtari, A., Jalili, M. M., & Mazidi, A. (2020). Study on frequency response and bifurcation analyses under primary resonance conditions of micro-milling operations. Applied Mathematical Modelling, 87, 404–429. https://doi.org/10.1016/j.apm.2020.06.01610.1016/j.apm.2020.06.016 ↗

40. Molnar, T. G., Berezvai, S., Kiss, A. K., Bachrathy, D., & Stepan, G. (2019). Experimental investigation of dynamic chip formation in orthogonal cutting. International Journal of Machine Tools and Manufacture, 145, Article 103429. https://doi.org/10.1016/j.ijmachtools.2019.10342910.1016/j.ijmachtools.2019.103429 ↗

41. Rajesh Mathivanan, N., Mahesh, B. S., & Anup Shetty, H. (2016). An experimental investigation on the process parameters influencing machining forces during milling of carbon and glass fiber laminates. Measurement, 91, 39–45. https://doi.org/10.1016/j.measurement.2016.04.07710.1016/j.measurement.2016.04.077 ↗

42. Su, X., Wu, X., & Shi, Y. (2023). Effects of cutting parameters on cutting force and cutting energy for crab-apple. Journal of Food Process Engineering, 46(7), Article e14352. https://doi.org/10.1111/jfpe.1435210.1111/jfpe.14352 ↗

43. Vasiliki, K., Efstratios, A., & Ioannis, B. (2022). Surface roughness of sliced veneers in terms of defects and wood structure variability – Impact of mild hydrothermal treatment. Drvna Industrija, 73(2), 177–191. https://doi.org/10.5552/drvind.2022.212910.5552/drvind.2022.2129 ↗

44. Ramananantoandro, T., Eyma, F., Belloncle, C., Rincé, S., & Irle, M. (2018). Effects of machining parameters on raised grain occurring after the application of water-based finishes. European Journal of Wood and Wood Products, 76, 1323–1333. https://doi.org/10.1007/s00107-017-1250-310.1007/s00107-017-1250-3 ↗

45. Guo, Q., Zhou, D., Xu, F., & Wu, Z. (2023). Study on the application of a new surface burr treatment process. Alexandria Engineering Journal, 71, 1–11. https://doi.org/10.1016/j.aej.2023.03.03210.1016/j.aej.2023.03.032 ↗

46. Wang, D., Yin, H., & Feng, L. (2024). Study on the effect of micro-texture coating tool on the milling quality of wood surface. Lubrication Science, 36(5), 387–395. https://doi.org/10.1002/ls.169910.1002/ls.1699 ↗

47. Xu, B., Zhang, J., Liu, H., Xu, X., & Zhao, W. (2021). Serrated chip formation induced periodic distribution of morphological and physical characteristics in machined surface during high-speed machining of Ti6Al4V. Journal of Manufacturing Science and Engineering, 143(10), Article 101006. https://doi.org/10.1115/1.405076010.1115/1.4050760 ↗

48. Kazlauskas, D., Jankauskas, V., Kreivaitis, R., & Tučkutė, S. (2022). Wear behaviour of PVD coating strengthened WC-Co cutters during milling of oak-wood. Wear, 498, Article 204336. https://doi.org/10.1016/j.wear.2022.20433610.1016/j.wear.2022.204336 ↗

49. Thoma, H., Peri, L., & Lato, E. (2015). Evaluation of wood surface roughness depending on species characteristics. Maderas Ciencia y Tecnología, 17(2), 285–292. https://doi.org/10.4067/S0718-221X201500500002710.4067/S0718-221X2015005000027 ↗

50. Sutowski, P., Nadolny, K., Sutowska, M., Myśliński, P., Gilewicz, A., & Warcholiński, B. (2022). Influence of regeneration process parameters on geometry and defects of clearance surface of planer knives used in wood planing process. Archives of Civil and Mechanical Engineering, 22, Article 43. https://doi.org/10.1007/s43452-021-00332-110.1007/s43452-021-00332-1 ↗

51. Kuram, E. (2018). The effect of monolayer TiCN-, AlTiN-, TiAlN-and two layers TiCN + TiN- and AlTiN + TiN-coated cutting tools on tool wear, cutting force, surface roughness and chip morphology during high-speed milling of Ti6Al4V titanium alloy. Proceedings of the Institution of Mechanical Engineers, Part B: Journal of Engineering Manufacture, 232(7), 1273–1286. https://doi.org/10.1177/095440541666690510.1177/0954405416666905 ↗

52. Zhu, Z., Cao, P., Guo, X., Qiu, X., Xie, S., & Ekevad, M. (2018). Cutting performance of cemented carbide cutting tool in turning high-density fiberboard. Materials Science & Engineering Technology, 49(12), 1476–1484. https://doi.org/10.1002/mawe.20180000310.1002/mawe.201800003 ↗

53. Zhu, Z., Buck, D., Wang, J., Wu, Z., Xu, W., & Guo, X. (2022). Machinability of different wood-plastic composites during peripheral milling. Materials, 15(4), Article 1303. https://doi.org/10.3390/ma1504130310.3390/ma15041303 ↗

54. Sun, M., Guo, K., Sivalingam, V., Sun, J., Li, D., & Huang, T. (2024). Understanding the tool wear mechanism during robotic milling of glass fibre reinforced plastic. Tribology International, 195, 109648. https://doi.org/10.1016/j.triboint.2024.10964810.1016/j.triboint.2024.109648 ↗

55. Pérez, J. M., Rodríguez, F., Alonso, M. V., & Oliet, M. (2011). Time–temperature–transformation cure diagrams of phenol–formaldehyde and lignin–phenol–formaldehyde novolac resins. Journal of Applied. Polymer. Science, 119, 2275–2282. https://doi.org/10.1002/app.3286610.1002/app.32866 ↗