Uncertainty of measurement and its influence on essential characteristics of post‐installed fasteners
Source abstract
Abstract
Abstract Testing laboratories according to IS0 17025 have to define their uncertainty of measurement in conducting tests. This can be done either by exact calculation or by means of an accurate estimation. All relevant contributions to the measurement uncertainty may be considered in this estimation. For the testing of post‐installed mechanical fasteners in concrete the European Assessment Document EAD 33232 resp. Technical Report TR 048 also demands the fulfilment of the specifications according to ISO 17025 considering the uncertainty of measurement. In this contribution a specific model for testing laboratories in the field of fastenings is provided. Based on the concrete‐cone‐capacity model the contributions of measurement uncertainty for the determination of the failure tension load in concrete are defined. The mathematical derivation of the sensitivity factors for the influence on the measurement uncertainty is shown. By means of a simplified method a proposal for the determination of the measurement uncertainty of tension loads, depending on the uncertainty of the concrete basement and embedment depth, is given.
Source: crossref · Quality: baseline
Research context
OpenAlex topics: Concrete Corrosion and Durability · Civil and Structural Engineering Research · Structural Behavior of Reinforced Concrete
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
Affiliations
Universität für Bodenkultur Wien Institut für Konstruktiven Ingenieurbau Peter‐Jordan‐Straße 82 1190 Wien
References (23)
Show source-provided references
1. ISO EN 17025:2018‐02: Allgemeine Anforderungen an die Kompetenz von Prüf‐ und Kalibrierlaboratorien Österreichisches Normungsinstitut Wien 2018.
2. EAD 330232‐00‐0601: Mechanical fasteners for use in concrete OJEU 2016/C 459/08 Brussels:European Organisation for Technical Assessment 2016.
3. 10.1002/best.20170008010.1002/best.201700080 ↗
4. 10.1002/mawe.20070014010.1002/mawe.200700140 ↗
5. Verordnung (EU) Nr. 305/2011 des Europäischen Parlaments und des Rates zur Festlegung harmonisierter Bedingungen für die Vermarktung von Bauprodukten und zur Aufhebung der Richtlinie 89/106/EWG des Rates (Bauproduktenverordnung) 9. März2011.
6. Tragverhalten von Dübelbefestigungen bei Zugbeanspruchung, Teil 1
7. Tragverhalten von Dübelbefestigungen bei Zugbeanspruchung, Teil 2
8. EOTA TR 048: Details of tests for post‐installed fasteners in concrete Brussels:European Organisation for Technical Assessments 2016.
9. JCGM 100: Evaluation of measurement data – Guide to the expression of uncertainty in measurement.Joint Committee for Guides in Metrology (JCGM) 2008.
10. JCGM 104: Evaluation of measurement data – An introduction to the “Guide to the expression of uncertainty in measurement” and related documents.Joint Committee for Guides in Metrology (JCGM) 2009.
11. JCGM 200: International vocabulary of metrology – Basic and general concepts and associated terms (VIM).Joint Committee for Guides in Metrology (JCGM) 2012.
12. EA‐4/18 European Accreditation Guidance on the level of profiency testing participation 2010.
13. Krystek M. · 2015
14. Zur Validierung quantitativer zerstörungsfreier Prüfverfahren im Stahlbetonbau am Beispiel der Laufzeitmessung
15. prEN 1992‐4:2013 – Eurocode 2: Bemessung und Konstruktion von Stahlbeton‐ und Spannbetontragwerken – Teil 4: Bemessung der Verankerung von Befestigungen in Beton; Deutsche Fassung prEN 1992‐4:2013 Berlin: Deutsches Institut für Normung e. V. Beuth Verlag 2013.
16. Prüfbericht Nr. 875‐16‐029: Vergleichsversuche betreffend die Fachgebiete 1 und 33 und Betrachtungen zur erweiterten Messunsicherheit Institut für Konstruktiven Ingenieurbau 2016.
17. ETAG 001 Guideline for European Technical Approval of Metal Anchors for Use in Concrete Part 1 Annex A Annex C European Organisation for Technical Approvals 1997 amended version 2013.
18. ACI 214R‐11: Guide to Evaluation of Strength Test Results of Concrete Reported by ACI Committee 214.American Concrete Institute2011.
19. ACI 214.4R‐03: Guide for Obtaining Cores and Interpreting Compressive Strength Results Reported by ACI Committee 214.American Concrete Institute2003.
20. SP37‐1 What is ACI Standard 214‐65 Reported by Abdun‐Nur E.A.American Concrete Institute1962.
21. 2011
22. 10.1002/best.20140009310.1002/best.201400093 ↗
23. 10.1002/best.20080064910.1002/best.200800649 ↗