Load‐bearing capacity and biological allowable limit of biodegradable metal based on degradation rate in vivo
Source abstract
Abstract
Abstract In this study, a newly developed Mg‐Ca‐Zn alloy for low degradation rate and surface erosion properties was evaluated. The compressive, tensile, and fatigue strength were measured before implantation. The degradation behavior was evaluated by analyzing the microstructure and local hardness of the explanted specimen. Mean and maximum degradation rates were measured using micro CT equipment from 4‐, 8‐, and 16‐ week explants, and the alloy was shown to display surface erosion properties. Based on these characteristics, the average and minimum load bearing capacities in tension, compression, and bending modes were calculated. According to the degradation rate and references of recommended dietary intakes (RDI), the Mg‐Ca‐Zn alloy appears to be safe for human use. © 2012 Wiley Periodicals, Inc. J Biomed Mater Res Part B: Appl Biomater 100B: 1535–1544, 2012.
Source: crossref · Quality: baseline
Research context
OpenAlex topics: Magnesium Alloys: Properties and Applications · Aluminum Alloys Composites Properties · Titanium Alloys Microstructure and Properties
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (31)
Show source-provided references
1. 10.1016/j.knee.2008.06.00110.1016/j.knee.2008.06.001 ↗
2. 10.1016/S0142-9612(00)00101-010.1016/S0142-9612(00)00101-0 ↗
3. 10.1016/S0142-9612(00)00132-010.1016/S0142-9612(00)00132-0 ↗
4. Biodegradable polymers as biomaterials10.1016/j.progpolymsci.2007.05.017 ↗
5. 10.1053/j.otsm.2004.07.01510.1053/j.otsm.2004.07.015 ↗
6. 10.1002/jbm.a.3117010.1002/jbm.a.31170 ↗
7. 10.1002/jbm.a.3129310.1002/jbm.a.31293 ↗
8. 10.1016/j.biomaterials.2006.12.02710.1016/j.biomaterials.2006.12.027 ↗
9. 10.1002/mawe.20080041210.1002/mawe.200800412 ↗
10. 10.1016/j.corsci.2007.01.00110.1016/j.corsci.2007.01.001 ↗
11. 10.1016/j.biomaterials.2004.09.04910.1016/j.biomaterials.2004.09.049 ↗
12. 10.1016/j.biomaterials.2005.10.00310.1016/j.biomaterials.2005.10.003 ↗
13. 10.1016/S0140-6736(07)60853-810.1016/S0140-6736(07)60853-8 ↗
14. 10.1016/j.actbio.2010.02.02810.1016/j.actbio.2010.02.028 ↗
15. 10.1038/nmat254210.1038/nmat2542 ↗
16. 10.1016/j.biomaterials.2007.12.02110.1016/j.biomaterials.2007.12.021 ↗
17. 10.1007/s10853-009-3936-310.1007/s10853-009-3936-3 ↗
18. ASTM StandardE9‐09Standard Test Method of Compression Testing of Metallic Materials at Room Temperature.West Conshohocken PA:ASTM International;2009.
19. ASTM StandardB557‐10Standard Test Methods for Tension Testing Wrought and Cast Aluminum‐ and Magnesium‐Alloy Products.West Conshohocken PA:ASTM International;2010.
20. ASTM StandardE466‐07Standard Practice for Conducting Force Controlled Constant Amplitude Axial Fatigue Tests of Metallic Materials.West Conshohocken PA:ASTM International;2007.
21. ASTM StandardF1717‐10Standard Test Methods for Spinal Implant Constructs in a Vertebrectomy Model.West Conshohocken PA:ASTM International;2010.
22. 10.1007/s12540-009-0955-110.1007/s12540-009-0955-1 ↗
23. 10.1016/j.biomaterials.2005.07.03710.1016/j.biomaterials.2005.07.037 ↗
24. 10.1016/j.cossms.2009.04.00110.1016/j.cossms.2009.04.001 ↗
25. Corrosion mechanism applicable to biodegradable magnesium implants
26. 10.1002/jbm.a.3213210.1002/jbm.a.32132 ↗
27. 10.1016/S0010-938X(96)00172-210.1016/S0010-938X(96)00172-2 ↗
28. Absorption of various inert gases from subcutaneous gas pockets in rats10.1152/jappl.1962.17.2.268 ↗
29. 10.1016/j.actbio.2007.09.01210.1016/j.actbio.2007.09.012 ↗
30. Standing committee on the scientific evaluation of dietary reference intakes · 2004
31. 2004