Design of functionally graded dental implant in the presence of cancellous bone

Abstract In a previous work by the author [Hedia HS, Mahmoud NA. Biomed Mater Eng 2004;14(2):133–143], a functionally graded material (FGM) dental implant was designed without cancellous bone in the model. In this investigation, the effect of the presence of cancellous bone as a thin layer around the dental implant was investigated. It is well known that the main inorganic component of natural bone is hydroxyapatite (HAP) and that the main organic component is collagen (Col). HAP implants are not bioabsorbable, and because induction of bone into and around the artificially made HAP is not always satisfactory, loosening or breakage of HAP implants might occur after implantation in the clinical application. The development of a new material that is bioabsorbable and that has osteoconductive activity is needed. Therefore, the aim of the current investigation was to design an implant, in the presence of cancellous bone as a thin layer around it, from FGM. In this study, a novel biomaterial, Col/HAP, as a FGM, was developed using the finite element and optimization techniques that are available in the ANSYS package. These materials have a self‐organized character similar to that of natural bone. The investigations have shown that the maximum stress in the cortical bone and cancellous bone for the Col/HAP functionally graded implant has been reduced by about 40% and 19%, respectively, compared with currently used titanium dental implants. © 2005 Wiley Periodicals, Inc. J Biomed Mater Res Part B: Appl Biomater, 2005