journal article·2026-06-16Open access

Metal-Organic Frameworks (MOFs)-Integrated Separator for Improving the Cycle Stability of Lithium–Ion Batteries

Apurba Ray, Neil Wood, Emre Guney, Bilal Tasdemir, Kamil Burak Dermenci, Maitane Berecibar, Bilge Saruhan

Batteries· Volume 12· Issue 6

Abstract

To date, lithium–ion batteries (LIBs) are considered one of the most promising and market-leading energy storage systems due to their high theoretical capacity and energy density. However, poor thermal and cyclic stability, low electrolyte uptake, and the possibility for frequent short circuits of typical separators and evolution of several gases during long cycle operation pose several problems for LIBs. Metal-organic frameworks (MOFs) have attracted widespread interest as a promising material for improving the cycle stability and safety of rechargeable batteries due to their inherent surface and structural properties such as high specific surface area, high porosity, and ionic conductivity. In this work, the aim is to provide detailed descriptions of the synthesis routes and parameters for obtaining various MOFs such as Zr-MOF-808 and Ni-MOF-74 nanoparticles and the fabrication of those MOF-integrated separators. To optimize the crystallinity, morphological and compositional characteristics, and several material characterizations such as XRD, SEM, and EDX have been applied. Afterwards, the synthesized MOF-integrated glass fiber (GF) separators have been developed for lithium–ion battery (LIB) applications. To investigate the electrochemical performance and the effect of MOF integration into the separators, electrochemical studies in the form of galvanostatic charge–discharge (GCD), electrochemical impedance spectroscopy (EIS) have been evaluated by preparing CR2032-type half-coin cells. This MOFs-integrated GF-separators and synthesized LiNi0.6Mn0.2Co0.2O2 (NMC622) cathode materials-based coin cell LIB exhibited higher cycle stability than bare GF-separator based LIB. This novel approach and extensive research suggest that development of MOF-integrated separators could significantly improve cycle stability by reducing the internal cell degradation for next generation energy storage devices.
Source: crossref · Quality: baseline

Research context

OpenAlex topics: Advancements in Battery Materials · Advanced Battery Materials and Technologies · Advanced Battery Technologies Research

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

Affiliations

Institute for Frontier Materials on Earth and in Space, German Aerospace Center (DLR e.V.), Linder Hoehe, 51147 Cologne, Germany

MOBI-Electromobility Research Centre, Department of Electrical and Energy Technology, Vrije Universiteit Brussel, Pleinlaan 2, 1050 Brussels, Belgium

Department of Materials Science Technologies, Faculty of Sciences, Turkish-German University, Sahinkaya Cad. 106, Beykoz, 34820 Istanbul, Türkiye

Funding

European Union’s research and innovation program Horizon Europe · Battery 2030 CSA3

References (56)

Show source-provided references
1. Effective upcycling of NMC 111 to NMC 622 cathodes by hydrothermal relithiation and Ni-enriching annealing10.1016/j.nxener.2024.100122 ↗
2. Progress in electrolytes for rechargeable Li-based batteries and beyond10.1016/j.gee.2016.04.006 ↗
3. Environmental and economic assessment of bio-based anode production10.1007/s10098-026-03498-5 ↗
4. Chen, X., Wang, Z., Wang, J., Lin, Y., and Li, J. (2025). Impact of Low-Pressure in High-Altitude Area on the Aging Characteristics of NCM523/Graphite Pouch Cells. Batteries, 11.10.3390/batteries11070261 ↗
5. Liu, W., Chen, G., Wang, N., Sun, X., Li, C., Xu, Y., Zhang, X., Zhang, X., and Wang, K. (2025). Tetramethylene Sulfone (TMS) as an Electrolyte Additive for High-Power Lithium-Ion Batteries. Batteries, 11.10.3390/batteries11070270 ↗
6. In-situ MOFs coating on 3D-channeled separator with superior electrolyte uptake capacity for ultrahigh cycle stability and dendrite-inhibited lithium-ion batteries10.1016/j.micromeso.2021.111544 ↗
7. An effective dual-channel strategy for preparation of polybenzimidazole separator for advanced-safety and high-performance lithium-ion batteries10.1016/j.memsci.2021.119190 ↗
8. Alawi, A., Saeed, A., Sharqawy, M.H., and Al Janaideh, M. (2025). A Comprehensive Review of Thermal Management Challenges and Safety Considerations in Lithium-Ion Batteries for Electric Vehicles. Batteries, 11.10.3390/batteries11070275 ↗
9. A review of gas evolution in lithium ion batteries10.1016/j.egyr.2020.02.022 ↗
10. Gas evolution in commercial Li-ion battery cells measured by on-line mass spectrometry–Effects of C-rate and cell voltage10.1016/j.jpowsour.2020.228968 ↗
11. Gas Evolution in All-Solid-State Battery Cells10.1021/acsenergylett.8b01457 ↗
12. Singlet Oxygen Generation as a Major Cause for Parasitic Reactions during Cycling of Aprotic Lithium-Oxygen Batteries10.1038/nenergy.2017.36 ↗
13. Hollow polypyrrole @ MnO2 spheres as nano-sulfur hosts for improved lithium-sulfur batteries10.1016/j.electacta.2017.12.068 ↗
14. Cross-Linked Gel Electrolytes with Self-Healing Functionalities for Smart Lithium Batteries10.1021/acsami.2c15011 ↗
15. Tasdemir, B., Krüger, S., Sohagiya, P., Ray, A., and Saruhan, B. (2026). Improvement of Cycling Stability of Core–Shell Structured Ni-Rich NMC Cathodes by Using a Tungsten Oxide Stabilization Interlayer. Batteries, 12.10.3390/batteries12030082 ↗
16. Optimized NMC622 electrodes with a high content of the active material: A comprehensive study10.1016/j.jpowsour.2024.234549 ↗
17. Gas Evolution in Lithium-Ion Batteries: Solid versus Liquid Electrolyte10.1021/acsami.0c02872 ↗
18. Degradation Mechanisms and Mitigation Strategies of Nickel-Rich NMC-Based Lithium-Ion Batteries10.1007/s41918-019-00053-3 ↗
19. The formation and stability of the solid electrolyte interface on the graphite anode10.1016/j.jpowsour.2014.06.024 ↗
20. Recent progress of metal-organic frameworks based high performance batteries separators: A review10.1016/j.ccr.2023.215592 ↗
21. Wade, T.L. (2006). High Power Carbon Based Supercapacitors, University of Melbourne, School of Chemistry.
22. Kerner, M., and Johansson, P. (2018). Pyrrolidinium fsi and TFSI-based polymerized ionic liquids as electrolytes for high-temperature lithium-ion batteries. Batteries, 4.10.3390/batteries4010010 ↗
23. Functionalized Bimetallic Hydroxides Derived from Metal-Organic Frameworks for High-Performance Hybrid Supercapacitor with Exceptional Cycling Stability10.1021/acsenergylett.7b00265 ↗
24. Metal-organic framework based electrode materials for lithium-ion batteries: A review10.1039/D1RA05073G ↗
25. Metal-organic-framework-based materials as platforms for energy applications10.1016/j.chempr.2023.09.009 ↗
26. Pristine MOF materials for separator application in lithium–sulfur battery10.1002/advs.202404834 ↗
27. Recent advances in MOF-based functional separators for lithium-metal/lithium-sulfur batteries10.1016/j.ccr.2025.217512 ↗
28. Multicomponent adsorptive separation of CO2, CH4, N2, and H2 over M-MOF-74 and AX-21@M-MOF-74 composite adsorbents10.1016/j.micromeso.2022.111899 ↗
29. Synergistic Effect of Bimetallic MOF Modified Separator for Long Cycle Life Lithium-Sulfur Batteries10.1002/aenm.202302897 ↗
30. Particle Size Control Influence on the Electrochemical Properties of Sulfur Deposited on Metal Organic Frameworks Host Electrodes10.1007/s10904-021-01901-w ↗
31. Green synthesis of zirconium-based MOF-808 by utilizing sustainable synthesis approaches10.1016/j.jorganchem.2023.122832 ↗
32. Flexible long-chain-linker constructed Ni-based metal-organic frameworks with 1D helical channel and their pseudo-capacitor behavior studies10.1016/j.jpowsour.2017.11.087 ↗
33. CoAl LDH@Ni-MOF-74 S-Scheme Heterojunction for Efficient Hydrogen Evolution10.1007/s12209-020-00269-1 ↗
34. Zhang, X., Yu, R., Wang, D., Li, W., and Zhang, Y. (2022). Green Photocatalysis of Organic Pollutants by Bimetallic Zn-Zr Metal-Organic Framework Catalyst. Front. Chem., 10.10.3389/fchem.2022.918941 ↗
35. Microwave-assisted synthesis of Zr-based metal–organic framework (Zr-fum-fcu-MOF) for gas adsorption separation10.1016/j.cplett.2021.138906 ↗
36. Sharifi-Rad, M., Kaykhaii, M., Khajeh, M., and Oveisi, A. (2022). Synthesis, characterization and application of a zirconium-based MOF-808 functionalized with isonicotinic acid for fast and efficient solid phase extraction of uranium(VI) from wastewater prior to its spectrophotometric determination. BMC Chem., 16.10.1186/s13065-022-00821-1 ↗
37. Preparation of Ni-MOF-74/SBS mixed matrix membranes and its application of CH4/N2 separation10.1016/j.seppur.2018.01.060 ↗
38. Preparation of Ni-MOF-74 membrane for CO2 separation by layer-by-layer seeding technique10.1016/j.micromeso.2012.07.008 ↗
39. Understanding the mechanism of capacity increase during early cycling of commercial NMC/graphite lithium-ion batteries10.1016/j.jechem.2022.07.005 ↗
40. The influence of electrochemical cycling protocols on capacity loss in nickel-rich lithium-ion batteries10.1039/D1TA06324C ↗
41. Limitations of Fast Charging of High Energy NMC-based Lithium-Ion Batteries: A Numerical Study10.1002/batt.202300189 ↗
42. Review on modeling of the anode solid electrolyte interphase (SEI) for lithium-ion batteries10.1038/s41524-018-0064-0 ↗
43. Nickel, Manganese, and Cobalt Dissolution from Ni-Rich NMC and Their Effects on NMC622-Graphite Cells10.1149/2.1151902jes ↗
44. Structural Degradation of Layered Cathode Materials in Lithium-Ion Batteries Induced by Ball Milling10.1149/2.0091910jes ↗
45. High-Voltage Potassium Ion Micro-Supercapacitors with Extraordinary Volumetric Energy Density for Wearable Pressure Sensor System10.1002/aenm.202003835 ↗
46. Frankenberger, M., Singh, M., Dinter, A., and Pettinger, K.H. (2019). EIS study on the electrode-separator interface lamination. Batteries, 5.10.3390/batteries5040071 ↗
47. Zhu, P., Ebert, B., Smyrek, P., and Pfleging, W. (2024). The Impact of Structural Pattern Types on the Electrochemical Performance of Ultra-Thick NMC 622 Electrodes for Lithium-Ion Batteries. Batteries, 10.10.3390/batteries10020058 ↗
48. Abbas, I., Tran, H.T., Tran, T.T.N., Pham, T.L., Shin, E.-C., Park, C.-W., Yu, S.-B., Lee, O.J., Nguyen, A.-G., and Jeong, D. (2025). GITT Limitations and EIS Insights into Kinetics of NMC622. Batteries, 11.10.20944/preprints202502.0370.v1 ↗
49. Electrochemical evaluation of LiNi0.5Mn0.3Co0.2O2, LiNi0.6Mn0.2Co0.2O2, and LiNi0.8Mn0.1Co0.1O2 cathode materials for lithium-ion batteries: From half-coin cell to pouch cell10.1007/s00706-022-02995-9 ↗
50. Facile synthesis of three-dimensional (3D) interconnecting polypyrrole (PPy) nanowires/nanofibrous textile composite electrode for high performance supercapacitors10.1016/j.compositesa.2017.05.033 ↗
51. Applied Surface Science Study on charge storage mechanism in working electrodes fabricated by sol-gel derived spinel NiMn2 O4 nanoparticles for supercapacitor application10.1016/j.apsusc.2018.08.259 ↗
52. Metal–organic frameworks for next-generation energy storage devices; a systematic review10.1039/D3MA00822C ↗
53. Controlled Pyrolysis of Ni-MOF-74 as a Promising Precursor for the Creation of Highly Active Ni Nanocatalysts in Size-Selective Hydrogenation10.1002/chem.201704341 ↗
54. Metal-organic frameworks and derivatives as next-generation materials for electrochemical energy storage10.1039/D5MH01705J ↗
55. MOF and related composites as selective functional separators and interlayers for Li-S batteries10.20517/energymater.2024.260 ↗
56. Zhao, T., Bi, Y., Chen, J., Yu, J., Peng, S., Luo, F., and Chen, Y. (2025). Progress in Improving Safety Performance of Battery Separators Based on MOF Materials: Mechanisms, Materials and Applications. Safety, 11.10.3390/safety11040111 ↗