Rescaling Capacity and Power Rating of Spent LIB for Second-Life Application
Source abstract
Abstract
The adoption of lithium-ion batteries (LIBs) as secondary rechargeable batteries across many industries, including consumer electronics, electromobility, industrial tools, and electrical energy storage, is on the rise. As lithium-ion batteries approach the end of their life, there is a need to assess them for the possibility of a secondary application or reuse for a less demanding application. The extra connections of individual cells, BMS, temperature sensors, and other components to form a compact battery pack pose a challenge for second-life assessment, which usually prefers to separate individual cells for testing before discarding very bad cells for recycling and grading cells with substantive capacity based on their remaining capacity. This is a high cost for the second-life assessment. This work seeks to investigate an approach that avoids dismantling the battery pack into individual modules, cells, and BMS by including a BMS feature that allows the capacity and power ratings to be rescaled onboard after its first use. A set of cells with different chemistries was used in this work: a nickel–cobalt–aluminium oxide cathode with a silicon-doped graphite anode (NCA-GS), a nickel–cobalt–aluminium oxide cathode and graphite, and a lithium–nickel–manganese–cobalt oxide (NMC) cathode with a graphite anode (NMC-G) with various ageing states and behaviours. Their internal resistance and capacity at the beginning and end of life were compared. The scaling factor was obtained by finding the square root of the ratio of the internal resistance at EOL to that at BOL. With the current obtained by multiplying the cycling current rate by the rescaling factor, the surface temperature profile of the aged cells during cycling became the same as the temperature at the beginning of life. The relaxation voltage after discharge to 0% SOC and charge to 100% SOC was used to set the low and high cut-off voltages, respectively. This contributed significantly to reduced ageing and to a lower temperature rise in the spent cells. This set the stage for rescaling or derating battery systems without separating the individual cells, which is a huge cost for second-life use of lithium-ion batteries. BMS can be designed with configurable voltage and current limits, so that when repurposed for a second life, only a simple configuration or firmware update may be necessary.
Source: crossref · Quality: baseline
Research context
OpenAlex topics: Advanced Battery Technologies Research · Advancements in Battery Materials · Extraction and Separation Processes
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
Affiliations
Electrical Energy Storage Technology (EET), Institute of Energy and Automation, Technische Universität Berlin, Einsteinufer 11, 10587 Berlin, Germany
Funding
Petroleum Technology Development Fund · German Academic Exchange Service
References (15)
Show source-provided references
1. Sustainable recycling technology for Li-ion batteries and beyond: Challenges and future prospects10.1021/acs.chemrev.9b00535 ↗
2. Gabbar, H.A., Othman, A.M., and Abdussami, M.R. (2021). Review of battery management systems (BMS) development and industrial standards. Technologies, 9.10.3390/technologies9020028 ↗
3. A comprehensive review on second-life batteries: Current state, manufacturing considerations, applications, impacts, barriers & potential solutions, business strategies, and policies10.1109/ACCESS.2019.2917859 ↗
4. Quantifying cell-to-cell variations of a parallel battery module for different pack configurations10.1016/j.apenergy.2020.115859 ↗
5. A general energy balance for battery systems10.1149/1.2113792 ↗
6. Temperature effect and thermal impact in lithium-ion batteries: A review10.1016/j.pnsc.2018.11.002 ↗
7. Thermal runaway caused fire and explosion of lithium ion battery10.1016/j.jpowsour.2012.02.038 ↗
8. Impact of aging on the thermophysical properties of lithium-ion battery electrodes10.1016/j.jpowsour.2024.234367 ↗
9. Influence of state of health and individual aging mechanisms on the thermal conductivity of lithium-ion cells10.1016/j.est.2023.106940 ↗
10. Aging and thermal behavior of lithium-ion battery under high charging current cycling10.1016/j.tsep.2025.104466 ↗
11. Investigations of battery degradation behaviour and state of charge reset of lithium-ion batteries using differential temperature10.1016/j.est.2025.119871 ↗
12. How do depth of discharge, C-rate and calendar age affect capacity retention, impedance growth, the electrodes, and the electrolyte in Li-ion cells?
13. Madani, S.S., Shabeer, Y., Allard, F., Fowler, M., Ziebert, C., Wang, Z., Panchal, S., Chaoui, H., Mekhilef, S., and Dou, S.X. (2025). A comprehensive review on lithium-ion battery lifetime prediction and aging mechanism analysis. Batteries, 11.10.3390/batteries11040127 ↗
14. Investigation of a charging anomaly in aged commercial lithium-ion batteries10.1016/j.est.2025.120320 ↗
15. The effect of cell-to-cell variations and thermal gradients on the performance and degradation of lithium-ion battery packs10.1016/j.apenergy.2019.04.108 ↗